Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.
TSB: This bulletin provides general high-voltage safety precautions for the HV/EV system. These high voltages are dangerous and can cause personal injury, severe burns, electric shock, and death if proper safety precautions are NOT followed. Be sure to carefully review ALL applicable Repair Manual procedures BEFORE performing service. Lexus strongly recommends that Service Technicians complete Master Certification status before performing any service repair work on high-voltage systems.
TSB: This bulletin provides general high-voltage safety precautions for the HV/BEV system. These high voltages are dangerous and can cause personal injury, severe burns, electric shock, and death if proper safety precautions are NOT followed. Be sure to carefully review ALL applicable Repair Manual procedures BEFORE performing service.
TSB: This bulletin provides general high-voltage safety precautions for the HV/BEV system. These high voltages are dangerous and can cause personal injury, severe burns, electric shock, and death if proper safety precautions are NOT followed. Be sure to carefully review ALL applicable Repair Manual procedures BEFORE performing service.
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year RZ 350e, RZ 450e, and RZ 550e vehicles.
The 2026 model year Lexus vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.
2026 model year Lexus vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicles glove box for customer reference.
2025 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2025 model year RZ 300e and RZ 450e vehicles. Refer to the universal Check Sheet that contains PDS steps that apply to all 2025 model year Lexus vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to L-SB-0003-24, Long-Term Vehicle Storage Guidelines.
TSB: 2024 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
TSB: Bei Fahrzeugen von Lexus des Modelljahrs 2025 sind an der Fahrerseite Haltehaken (Clips) für die Fußmatte angebracht, um die Fußmatte in der korrekten Position zu sichern. Bei einigen Modellen können zusätzlich Haltehaken (Clips) für die Fußmatten auf der Beifahrerseite und im Fond verwendet werden. Während der Auslieferungsvorbereitung (Pre-Delivery Service, PDS) befestigen Sie die Fußmatte auf der Fahrerseite und, falls zutreffend, die Fußmatten auf der Beifahrerseite und im Fond mithilfe der Haltehaken (Clips) am Fahrzeugteppich, und zwar gemäß dem Montageverfahren in dieser technischen Mitteilung.
TSB: 2024 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks.
TSB: 2024 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
TSB: Some 2022 ? 2023 model year Lexus vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. Techstream software has been modified to indicate when configuration software is required. A new Configure column has been added to the Techstream Health Check Results screen to show when configuration software is available for a specific ECU. Follow the Operation Procedure in this bulletin to complete the ECU Software Configure Process.
TT: Select 2022-2023MY Lexus vehicles are equipped with Advanced Park. The Advanced Park system assists in safely and smoothly parking in a target parking space by displaying the blind spots around the vehicle and the parking spot through a bird?s eye view, delivering operation guidance through displays and buzzer operation, and changing the shift position, operating the steering wheel, accelerator pedal, and brake pedal. The Lexus smartphone app Remote Park feature will not be available for 2022-2023 NX, 2023 RX, & 2023 RZ vehicles equipped with Advanced Park. To minimize guest dissatisfaction, Lexus will ask dealers to disable the Remote Park feature during the PDS process on 2022-2023 NX, 2023 RX, & 2023 RZ vehicles equipped with Advanced Park. The Advanced Park feature will still operate.
Einige Fahrzeuge der Baujahre RZ 350e, RZ 450e und RZ 550e 2026 können den Diagnostic Trouble Code (DTC) U25521F des Level-3-DC-Schnellladens aufweisen. Unter bestimmten Bedingungen kann das Laden entweder normal funktionieren oder einen Ausfall erleben, wobei eine Ladefehlermeldung auf dem Multi-Information Display (MID) angezeigt wird. Dieser Zustand wird auf ein Problem der Steuerlogik und einen möglichen Spannungsabfall zurückgeführt, der die Funktionalität der Plug-In Charge Control Computer Assembly beeinträchtigt. Die Steuerlogik wurde modifiziert, um die Möglichkeit dieses Zustands zu verringern.
Eine Batterie in einem gelagerten Fahrzeug unterliegt Bedingungen, die ihre Leistung und Lebensdauer verringern können. Zu diesen Bedingungen gehören Lagerzeit, Temperatur, parasitärer Entladen und Batterielast. Aufgrund dieser Faktoren sind eine Batterieinspektion und Wartung erforderlich, um einen ordnungsgemäßen Betrieb und eine optimale Batterielebensdauer sicherzustellen.
Während des Herstellungsprozesses werden die Reifen als abgestimmte Sätze am Fahrzeug montiert, um Schäden wie Ziehen oder Driften zu reduzieren. Wenn die Räder vor der Auslieferung ersetzt oder neu lackiert werden, ist es wichtig, dass die Reifen am selben Ort und in derselben Drehrichtung am Fahrzeug bleiben.
Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be implemented to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicles systems and components. Any problems that are found should be corrected immediately.
State of Health (SOH): An estimate of battery health that is updated as the vehicle learns from operating and charging conditions over time. Distance Since Last Update: Indicates the distance accumulated since the last SOH calculation. A default mileage value of 40,727 at SOH 100% may be displayed until sufficient vehicle learning is completed. Once SOH value updates from 100%, the Distance Since Last Update value will re-set to 0 miles. Both SOH and Distance Since Last Update values will continue to update as the vehicle continues to learn.
Some 2026 model year RZ 350e, RZ 450e, and RZ 550e vehicles may exhibit the Diagnostic Trouble Code (DTC) U255221F associated with the level 3 DC fast charging. Under certain conditions, charging may either operate normally or experience failure, with a charging malfunction message displayed on the Multi-Information Display (MID). This condition is attributed to a control logic issue and potential voltage drop affecting Plug-In Charge Control Computer Assembly functionality. The control logic has been modified to reduce the possibility of this condition.
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).