Diese Akte sammelt die bekannten Mängel des Mazda 323 VIII, verfasst und belegt von der Community. Lesen ist frei; mit einem kostenlosen Konto kannst du beitragen. Ein Mangel erhält das Siegel, sobald genug angesehene Mitwirkende ihn bestätigt haben.
Halter melden bei diesem Auto häufig Probleme mit airbags (82 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
Halter melden bei diesem Auto häufig Probleme mit seat belts (74 Beschwerden), aber noch niemand hat die Ursache erklärt. Kennen Sie sie?Eintrag verfassen
82 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1994–1998), typically at around 61,000 miles. Most often named: frontal (82%). Reported consequences: 57 crashes, 1 fire, 64 injuries, 1 death.
74 owners in the United States reported problems with the seat belts of this car to NHTSA (model years 1994–1998), typically at around 108,000 miles. Most often named: front:anchorage (18%), front:retractor (16%). Reported consequences: 13 crashes, 25 injuries.
40 owners in the United States reported problems with the brakes of this car to NHTSA (model years 1994–1998), typically at around 99,000 miles. Most often named: foundation components (25%), antilock/traction control/electronic limited slip (25%), foundation components:disc (15%). Reported consequences: 12 crashes, 10 injuries.
On certain vehicles, a defect in the ignition switch could cause an electrical short to develop over time. This could result in smoke and/or fire, increasing the risk of injury and/or damage to property. Correction: Dealers will replace the ignition switch.
Transport Canada19. Okt. 20152015489Modelljahre 1994–1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
Some customers may experience the MAZDA CONNECT rebooting or the screen turning black under any temperature. When the concern occurs, MAZDA CONNECT reboots repeatedly, and if the SD card is removed during this reboot cycle, the rebooting cycle ends. This is caused by some SD cards for the MAZDA CONNECT navigation system being manufactured with improper hardware, resulting in a data reading error. To correct the concern, the SD card hardware has been changed.
Some customers may complain about the following message displayed in the Multi-Information Display: In the following cases, the MRCC with Stop & Go function system is canceled when the vehicle is traveling at 19 mph (30 km/h) or less: The Forward Sensing Camera (FSC) cannot detect target objects due to one of the following: The windshield is dirty The FSC lens is foggy There is low visibility due to rain, fog or snow It is at night and there is not enough light There is direct or reflected sunlight on the FSC There is problem with the FSC There is a problem with the AUTOHOLD control function. There is a problem with the electric parking brake (EPB).
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0).