Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mini Mini

2001– · 5 generationen · 50 dokumentierte Mängel · 3 Märkte
Generationen

Technische Bulletins (TSB) sind Reparaturanweisungen, die Hersteller ihren Händlern zu bekannten Problemen schicken. Sie sind keine Sicherheitsrückrufe, bestätigen aber oft einen Mangel.

SchweregradAlleMittelGering
Modelljahr
Mini IV (F65/66/67) · 2024–
BulletinMittelSonstigesNA

Bulletin

Ein im Verdeckbügel-Lager eingebautes Verstellelement kann möglicherweise zu Scheuerstellen am Cabrio-Verdeck führen.

NHTSA · Herstellerbulletin11028292Modelljahre 2025Automatisch übersetzt · Original: EnglischDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

Es ist möglich, dass der Führungsstift (auch Drehachse genannt) am Windabweiser beim Ausbau und/oder während der Montage bricht.

NHTSA · Herstellerbulletin10228446Modelljahre 2021Automatisch übersetzt · Original: EnglischDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

Der Einbau einer Lenkspindel für Rechtslenker in Linkslenker-Fahrzeuge ist nicht mehr erforderlich

NHTSA · Herstellerbulletin10216773Modelljahre 2014Automatisch übersetzt · Original: EnglischDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

ROLLORANKEN-RÜCKRUF: Die MINI AG hat die Prüfung und Rücksendung der folgenden Teilenummer angefordert – 54 10 9 451 245. Bestände dürfen nicht verkauft oder in Fahrzeuge eingebaut werden.

NHTSA · Herstellerbulletin10184596Automatisch übersetzt · Original: EnglischDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC245: Stabilizer Support Inspection BMW AG has requested the inspection of the following part numbers: 31 35 6 778 827. Stock should not be sold or installed on any vehicle until inspection has been completed.

NHTSA · Herstellerbulletin10177633Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC250: Mechanical Belt Tensioner Inspection BMW AG has requested the inspection of the following part numbers: 11 28 8 580 360. Stock should not be sold or installed on any vehicle until inspection has been completed.

NHTSA · Herstellerbulletin10177635Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC228: Control Unit RDC Inspection BMW AG has requested the inspection of the following part number: 36 10 6 868 194 Stock should not be sold or installed on any vehicle until inspection has been performed. Concerned are all parts produced from January 02 2020 to February 16 2020. Please return all affected part(s) to your facing Regional Distribution Center (RDC).

NHTSA · Herstellerbulletin10174321Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC233: Fan Shroud Inspection BMW AG has requested the inspection of the following part number: 17 42 8 742 712 Stock should not be sold or installed on any vehicle until inspection has been completed. Concerned are all parts delivered and shipped so far. Please return all affected part(s) to your facing Regional Distribution Center (RDC).

NHTSA · Herstellerbulletin10174322Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC213 Bowden Cable Inspection: BMW AG has requested the inspection of the following part numbers: 51 21 7 296 459 / 51 21 7 320 309 / 51 21 7 364 596 Stock should not be sold or installed on any vehicle until inspection has been completed. Concerned are all parts delivered and shipped so far. Please return all part(s) to your facing Regional Distribution Center (RDC).

NHTSA · Herstellerbulletin10171508Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC214 Intake Duct Return: BMW AG has requested the return of the following part number: 17 51 1 524 439 Stock should not be sold or installed on any vehicle. Concerned are all parts delivered and shipped so far. Please return all part(s) to your facing Regional Distribution Center (RDC).

NHTSA · Herstellerbulletin10171509Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

BMW Parts Bulletin TEC195 USB Socket Inspection BMW AG has requested the inspection of the following part numbers: 84 10 8 711 938 / 84 10 8 711 939 / 84 10 8 711 940 Stock should not be sold or installed on any vehicle until inspection has been completed.

NHTSA · Herstellerbulletin10169477Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

MINI PARTS BULLETIN TEC152 Tank Breather Valve Return. MINI AG has requested the inspection of the following part number: 13 90 7 621 174. Stock should not be sold or installed on any vehicle.

NHTSA · Herstellerbulletin10153716Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini II · 2006–2013Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

"White Wear Marks on Canvas Top. Wear marks appear on the convertible top on the left and/or right side C-pillar areas. A For vehicles produced to December 12, 2011 1. Replace the defective canvas convertible top. Refer to ISTA Repair Instruction 54 34 120, ""Replacing soft top fabric."" Note: The following repair steps must be performed before the new top is installed to prevent a repeat repair for wear marks. 2. With the defective canvas cover removed, the current main pillars must be replaced. Refer to ISTA Repair Instruction 54 34 996, ""Replacing left or right main pillar."" 3. The current locking mechanisms and bump stops must be replaced as well. Refer to ISTA Repair Instruction 54 34 196, ""Removing and installing / replacing both stowage locks."" The repair kit* needed is listed below. 7. Reinstall the removed parts in the reverse order of their removal. 8. Operate the top several times to quality check the repair."

NHTSA · Herstellerbulletin10149505Modelljahre 2009–2014Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

WIND DEFLECTOR DAMAGED. A rattle may be heard from the wind deflector while driving or, the retaining pins may be broken when installing wind deflector. Retaining pins in wind deflector are broken.

NHTSA · Herstellerbulletin10146928Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

SERVICE ACTION: RUBBER STRIP ON REAR SIDE WINDOW TRIM IS CRACKED. The rubber strip on the rear side window trim may crack. In some cases a gap may be evident on the rubber trim strip. Results are cosmetic- no water leakage or sound intrusion. Combination of unfavorable materials.

NHTSA · Herstellerbulletin10146871Modelljahre 2016–2017Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

Water Ingress In Footwell Area From A/C Condensate Drain This Service Information bulletin supersedes SI M64 01 16 dated March 2016.. Damp front foot-well carpet after long period of air conditioning use. Musty odor in the vehicle (moldy, old socks, laundry room). The A/C condensate drain hose is blocked by the heatshield. The A/C condensate drain hose is not attached properly to the housing. The A/C condensate drain hose was damaged during installation or previous repair.

NHTSA · Herstellerbulletin10146874Modelljahre 2016Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini II · 2006–2013
BulletinMittelSonstigesNA

Bulletin

Mini: Check svs function. On certain vehicles, the voice input system (svs sa 620) does not function. The svs was not installed in the vehicles. *pe

NHTSA · Herstellerbulletin10026789Modelljahre 2008Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinMittelSonstigesNA

Bulletin

Coolant expansion tank leaks. Launch up to 01/03 production. *tt

NHTSA · Herstellerbulletin10001079Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini IV (F65/66/67) · 2024–
BulletinGeringSonstigesNA

Bulletin

If MINI Personal Assistant is active in the vehicle, once the customer exits the vehicle and a new key cyclestarts, the MINI Personal Assistant is deactivated and no longer available.

NHTSA · Herstellerbulletin11034483Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini IV (F65/66/67) · 2024–
BulletinGeringSonstigesNA

Bulletin

During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors. TheCheck Control message Drive carefully. Driving stabilisation. will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified

NHTSA · Herstellerbulletin11034472Modelljahre 2026Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini II · 2006–2013
BulletinGeringSonstigesNA

Bulletin

Control Unit PDC Return

NHTSA · Herstellerbulletin11033151Modelljahre 2010–2011Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini IV (F65/66/67) · 2024–
BulletinGeringSonstigesNA

Bulletin

During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors. TheCheck Control message Drive carefully. Driving stabilisation. will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified

NHTSA · Herstellerbulletin11029097Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini IV (F65/66/67) · 2024–
BulletinGeringSonstigesNA

Bulletin

During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors. TheCheck Control message Drive carefully. Driving stabilisation. will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified

NHTSA · Herstellerbulletin11028930Modelljahre 2025Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini I · 2001–2006
BulletinGeringSonstigesNA

Bulletin

Adhesive Film Return

NHTSA · Herstellerbulletin11025847Modelljahre 2001Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Mini III · 2013–2024
BulletinGeringSonstigesNA

Bulletin

Dichtungssatz-Rückgabe

NHTSA · Herstellerbulletin11024734Modelljahre 2022Automatisch übersetzt · Original: EnglischDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).