Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

Mitsubishi Lancer Evolution

1992–2016 · 11 generationen · 9 dokumentierte Mängel · 3 Märkte
Generationen
Modelljahr
Lancer Evolution VIII · 2003–2005Lancer Evolution Evolution Wagon · 2005–2006
Lancer Evolution X · 2007–2016
RückrufKritischInnenraumNA

Airbag

On certain vehicles operated in areas of heavy road salt usage, a mixture of snow, water and road-salt solution may infiltrate between the front impact sensor and the bracket that attaches it to the vehicle. Over time, repeated freezing/thawing cycles could cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. In the event of a crash, this could result in delayed deployment of the driver and passenger front airbags which would increase the risk of injury. Correction: Dealers will inspect the front impact sensor and replace it if it is found to be cracked. An updated designed bracket and cover will also be installed.

Transport Canada29. Juli 20162016382Modelljahre 2008–2015Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Lancer Evolution Evolution Wagon · 2005–2006Lancer Evolution IX · 2005–2007
RückrufKritischInnenraumNA

Air bags:Frontal:Passenger side:Inflator module

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2006-2007 Lancer and Lancer Evolution vehicles manufactured June 29, 2005, to June 19, 2007, equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating air bag deployment, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

NHTSA · USA23. Mai 201616V334000Modelljahre 2006–2007Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Lancer Evolution X · 2007–2016
RückrufKritischInnenraumNA

Airbag

On certain vehicles operated in areas of heavy road salt usage, the front impact sensors may corrode between the sensor bushing and sensor bracket. Over time, the corrosion may cause a crack to develop in the sensor case allowing water intrusion and short circuit of the sensor. This could result in delayed deployment of the driver and passenger front airbags during a vehicle crash, increasing the risk of personal injuries or death. Correction: Dealers will replace the front impact sensors.

Transport Canada9. Nov. 20092009317Modelljahre 2008–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Lancer Evolution X · 2007–2016
RückrufKritischInnenraumNA

Air bags:Frontal:Sensor/control module-inactive

Mitsubishi is recalling model year 2008-2009 lancer and lancer evolution vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virginia, wisconsin and district of columbia. In areas where heavy road salt is used in the winter, a long term exposure to a mixture of melted snow with salt thrown up by the other vehicles on the road may cause a water-salt mixture to adhere to the front impact sensors.

NHTSA · USA5. Nov. 200909V435000Modelljahre 2008–2009Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Lancer Evolution VIII · 2003–2005Lancer Evolution Evolution Wagon · 2005–2006
Lancer Evolution Evolution Wagon · 2005–2006Lancer Evolution IX · 2005–2007Lancer Evolution X · 2007–2016
RückrufMittelInnenraumJP

(ファン)ベルト

エンジンの補機駆動用ベルトの材質が不適切なため、樹脂製プーリが傾斜状に摩耗するものがある。そのため、そのまま使用を続けると当該ベルトが損傷して外れ、警告灯が点灯するとともに、バッテリ上がりまたはオーバーヒートに至るおそれがある。また、油圧パワーステアリング車においては、操舵力が増大するおそれがある。

MLIT · Japan11. Sept. 20141134211Modelljahre 2005–2011Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Lancer Evolution X · 2007–2016
RückrufMittelInnenraumJP

シートベルト

前席用座席ベルトのバックルにおいて、バックルの組立工程が不適切なため、バックル内部構成部品が折損しているものがある。そのため、当該折損破片がバックル内部に噛み込むと、ベルトを装着できなくなるおそれがある。

MLIT · Japan30. Juni 20101125640Modelljahre 2010Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).