Kraftfahrzeuge - Karosserie (Sitzplätze)
Die Schienen des Fahrersitzes können bei längerer Nutzung in einer bestimmten Position Risse zu zeigen beginnen.
🔔 Kostenloses Konto anlegen und Benachrichtigungen zu Nissan Micra (alle generationen) erhalten
Die Schienen des Fahrersitzes können bei längerer Nutzung in einer bestimmten Position Risse zu zeigen beginnen.
Im Beifahrerairbag können Risse entstehen. Dadurch wird seine Schutzfunktion beeinträchtigt, was das Verletzungsrisiko bei einem Unfall erhöht.
The passenger airbag may develop a tear during deployment.
On certain vehicles equipped with a mechanical key ignition system, a spring in the ignition switch could wear and break. This may allow the ignition key to inadvertently move from the ON position to the accessory (ACC) position while driving, causing the engine to shut off and the airbag system to lose power. The resulting loss of motive power, and change in steering and brake forces could increase the risk of a crash causing injury and/or damage to property. Additionally, in the event of a crash, this may also cause the airbags not to function. Correction: Dealers will inspect the lot number of the ignition switch, and replace it with a new one if it is affected. Note: Until the correction is performed, owners are advised to remove all objects from the ignition key ring, such as additional keys, key chains, etc.
The seat belt retractor internal car sensor may not function as intended. In the event of an accident, the retractors could fail to lock and in such circumstances the seatbelt would not restrain the occupant.
Cracks may form in the front wheel hub. The front wheel hub could consequently break leading to the front wheel become detached.
On certain vehicles, a bad connection at the side airbag sensor connector could cause a momentary communication loss from the side airbag sensor to the Airbag Control Unit (ACU). This would put the system in a backup state, lowering the impact threshold required for a side airbag deployment. If a door is being closed with force while the system is in this backup state, this could cause an unintended curtain airbag, seat-mounted side airbag and seat belt pretensioner deployment in a non-warranted (non-impact) situation, which would increase the risk of injury to occupants. Correction: Dealers will install a jumper harness and replace the side airbag sensor with a new one.
The lower pinion needle bearing may have been omitted during manufacture of the steering gear due to insufficient controls in the suppliers manufacturing process. It is possible the pinion may disengage from the steering gear with loss of steering control.
null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.
It has been identified that due to the incorrect assembly of the driver airbag inflator. If the vehicle is involved in a collision and the air bag is required to deploy then the gas flow path may have been blocked increasing the internal pressure within the inflator. As a result the driver airbag inflator casing may crack and fragment.
Bij het activeren van de voorste passagiersairbags kan ten gevolge van een te hoge druk van het opblaasmechanisme de behuizing van de airbag losraken.
On certain vehicles, the driver's (frontal) airbag inflator was built with an incorrect part which could cause the inflator to rupture during a deployment. In a crash, this may cause airbag components to separate, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. Correction: Dealers will replace the driver's (frontal) airbag inflator.
null The driver airbag inflator may have been assembled incorrectly. In the event of deployment of the airbag, the gas flow path may be blocked increasing the internal pressure in the inflator. As a result, the driver airbag inflator casing may crack and fragment causing injuries.
ステアリングホイールにおいて、固定ボルトの締め付けが不適切なものがあるため、走行中の振動等により当該固定ボルトが緩んで、ステアリングホイールとステアリングコラムのセレーション勘合部でガタが発生することがある。そのまま使用を続けると、当該セレーション勘合部が摩耗してガタが更に大きくなり、最悪の場合、ハンドル操作ができなくなるおそれがある。
It is possible that the steering wheel mounting bolt may not have been torqued to the correct specification. In addition this torque setting may deteriorate over time as axial tension on the steering wheel boss can be affected by temperature change. The driver will receive warning of the issue by the excessive play/movement in the steering wheel. However should the driver neglect to take notice of this warning it is possible that the steering wheel could detach and affect direction control of the vehicle.
Nissan has identified that the fuel rail pressure sensor of some vehicles may have not been correctly tightened to the fuel rail of the engine and may loosen gradually due to heat and vibration of the engine. If left undetected and the vehicle continues to be driven in this condition in extreme cases fuel leakage may occur.
かじ取装置の中間シャフトにおいて、ピニオンシャフトの挿入が不十分なため、確実に締結されていないものがある。そのため、ピニオンシャフトが徐々に抜け出して、最悪の場合、ハンドル操作ができなくなるおそれがある。
It has been identified that the driver's airbag on some K12 Micras due to incorrect welding of the airbag module may not deploy in the event of a frontal impact. Thus potentially reducing the protection afforded to the vehicle's occupants.
The steering wheel retaining bolt may not have been tightened to the specified torque. If ignored it can potentially lead to a loss of steering control.
The security of the fuel filler hose to tube joint may be insufficient due to clip size and clamping capability. If ignored fuel leakage may occur.
Bei bestimmten Fahrzeugen sollte der Fahrersitz in einer Position eingestellt werden, in der er mit einem konstruktiven Merkmal in der oberen Schiene zusammenfällt, wodurch die Belastungsgrenzen des Schienenmaterials unter bestimmten Bedingungen überschritten werden können.
Le siège du conducteur peut être défectueux, ce qui peut faire en sorte que les ancrages de la ceinture de sécurité ne fonctionnent pas comme prévu, ce qui crée un risque de blessure en cas d’accident.
Problem: Bei bestimmten Fahrzeugen kehrt das Rückfahrkamerasystem beim Einlegen des Rückwärtsgangs nicht in die Standardeinstellung zurück. Dies kann zu einer eingeschränkten Sicht nach hinten führen, wenn ein Fahrer die Anzeige der Kamera zuvor angepasst hatte. Die kanadischen Vorschriften verlangen, dass das Rückfahrbild jedes Mal, wenn die Kamera eingeschaltet wird, in seine ursprüngliche Einstellung zurückkehrt. Sicherheitsrisiko: Eine eingeschränkte Sicht nach hinten könnte das Unfallrisiko erhöhen. Korrekturmaßnahmen: Das Unternehmen wird die Halter per Post benachrichtigen und ihnen mitteilen, dass sie ihr Fahrzeug zu einem Händler bringen sollen, um die Software für die Rückfahrkamera zu aktualisieren.
車両製作工場の完成検査において、完成検査工程における合否判定が不明確な可能性があるため、道路運送車両の保安基準に関する検査が適切に行われていなかった。
車両製作工場の完成検査において、任命されていない検査員が合否判定を行ったものがあり、安全環境性能法規(保安基準)に関する検査が適切に行われていなかった。
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).