CLOSED-CIRCUIT CURRENT MONITORING. Increased closed-circuit currents may occur permanently or intermittently and cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control module or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control module will be reset if the battery is disconnected. Following a reset, the faulty control module may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp or 100-amp clip-on probe can be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time.
NANHTSA · Herstellerbulletin10149555
Technische Bulletins
Im Original (Englisch) angezeigt · Übersetzung ausstehend
Betrifft: BMW 1 Series (F40) · BMW 2 Series II · BMW 3 Series (F30) · BMW 5 Series (E28) · BMW 6 Series (E63) · BMW 7 Series E65 · BMW 8 Series (G15) · BMW E24 · BMW Z4 M Coupé (E86) · BMW M Roadster Z4 M Coupé (E86) · BMW M1 · BMW F80 M3 · BMW M5 (F10) · BMW X5 · BMW Z3 · BMW Z4 (E89) · BMW Z8
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).