On certain vehicles, an electrical short within the airbag electronic control unit may cause inadvertent deployment of the front airbags and seat belt pretensioners. Correction: Dealers will replace the airbag electronic control unit (ECU). Note: parts will not be available until April 2003.
Transport Canada15. Nov. 20022002212Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Certain passenger vehicles. Static electricity can build up within the passenger-side air bag module and create significant enough charge to cause an inadvertent air bag deployment during triggering events. Most of these triggering events have occurred in cooler, dry weather and have generally included dusting or wiping of the dashboard, starting the car, or closing the door. Unexpected air bag deployment can result in occupant injury. Correction: Dealers will install a front passenger-side air bag module grounding strap
Transport Canada3. Juli 20012001191Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Note: 5 door vehicles. These vehicles do not comply with c.M.V.S.S. 210 - seat belt assembly anchorages. Vehicles were assembled with a non heat treated outboard attachment plate on the safety belt which could in certain circumstances deform and detach from the seat anchorage. Correction: Front seat belts will be inspected and replaced if necessary.
Transport Canada7. Mai 19961996070Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
During static testing of belt anchorage points, the outboard attachment plate being used in the testing deformed and detached from the seat anchorage. This does not comply with fmvss no. 209, "seat belt assemblies" and no. 210, "seat belt assembly anchorages."
NHTSA · USA3. Mai 199696V077000Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain passenger vehicles, the air bag electronic control unit (ecu) is designed to sense and discriminate frontal impact events, command air bag and seat belt pretensioner deployments in a timely manner, and perform continuous diagnostics of the air bag system in the vehicle. Due to the possible insufficient sealing of the bottom of an electrolyte capacitor, it is possible for it to leak electrolyte within the air bag ecu. Also, in high humidity environments, the operation of the vehicle air conditioner can cause rapid cooling of the ecu, which in turn may cause the formation of condensation with the unit.
Vehicle description: Passenger vehicles. Static electricity can build up within the passenger-side air bag module and create enough of a charge to cause an inadvertent air bag deployment. Most of these inadvertent deployments have occurred in cooler, dry weather, and have generally included dusting or wiping of the dashboard, starting the car, or closing the door.
NHTSA · USA2. Juli 200101V222000Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Note: 1994-95 3 and 5 door models and 1995 convertibles. The seat assemblies may be missing one or more of the arc welds that join the seat back recliner mechanism to the seat back frame. This could result in the seat back falling backwards if the vehicle is impacted from the rear. Sudden failure of a driver seat back could occur without prior warning and cause the driver to lose control, resulting in a possible crash. Correction: Seat backs will be inspected and replaced if required.
Transport Canada16. Feb. 19951995028Modelljahre 1994–1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
On certain vehicles equipped with manually adjusted front seats, it is possible that the two (2) trigger springs mounted to the fore/aft adjustment lever on both front seats cannot develop sufficient force to properly lock the seat rails. This could result in the seat moving in the event of a collision. Correction: faulty springs will be replaced with ones with the appropriate trigger spring force.
Transport Canada8. Aug. 19941994127Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
There is a risk of fatigue cracks around the attachment bushings on the height adjusting mechanism in the driver's seat. In the event of a rear end collision, the height adjuster could break and allow the seat to fold down rearward. Correction: Dealers will replace the seat rails, on the driver's side, with new ones.
Transport Canada29. Juli 19941994121Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Two trigger springs mounted to the fore/aft adjustment lever do not develop sufficient force to properly lock the seat rails. After the seat is adjusted, this does not allow the seat rail lock to properly engage, which can cause the seat to move in a sudden stop or collision.
NHTSA · USA8. Juli 199494V127000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
A weld in the seat rails was not made, increasing the risk of fatigue cracks forming around the attachment bushings on the height adjustment mechanism, causing the possibility of the height adjuster breaking in a rear end collision and allowing the seat to fold backwards.
NHTSA · USA13. Juni 199494V110000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Fahrzeugbeschreibung: Personenkraftwagen. Das Airbag-Warnetikett an der fahrerseitigen Sonnenblende wurde weggelassen. Dies entspricht nicht den Anforderungen der FMVSS Nr. 208, „Occupant Crash Protection“.
Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).