Frei lesbar · kostenloses Konto zum MitmachenNachfolger von Anticars (2000)

SaabSaab 900

1978–1997 · 2 generationen · 42 dokumentierte Mängel · 3 Märkte
Generationen
Modelljahr
900 "Classic" · 1978–1993
900 NG · 1993–1997
RückrufKritischInnenraumNA

Airbag

On certain vehicles, an electrical short within the airbag electronic control unit may cause inadvertent deployment of the front airbags and seat belt pretensioners. Correction: Dealers will replace the airbag electronic control unit (ECU). Note: parts will not be available until April 2003.

Transport Canada15. Nov. 20022002212Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufKritischInnenraumNA

Airbag

Certain passenger vehicles. Static electricity can build up within the passenger-side air bag module and create significant enough charge to cause an inadvertent air bag deployment during triggering events. Most of these triggering events have occurred in cooler, dry weather and have generally included dusting or wiping of the dashboard, starting the car, or closing the door. Unexpected air bag deployment can result in occupant injury. Correction: Dealers will install a front passenger-side air bag module grounding strap

Transport Canada3. Juli 20012001191Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufKritischInnenraumNA

Seats And Restraints

Note: 5 door vehicles. These vehicles do not comply with c.M.V.S.S. 210 - seat belt assembly anchorages. Vehicles were assembled with a non heat treated outboard attachment plate on the safety belt which could in certain circumstances deform and detach from the seat anchorage. Correction: Front seat belts will be inspected and replaced if necessary.

Transport Canada7. Mai 19961996070Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufKritischInnenraumNA

Seat belts:Front:Anchorage

During static testing of belt anchorage points, the outboard attachment plate being used in the testing deformed and detached from the seat anchorage. This does not comply with fmvss no. 209, "seat belt assemblies" and no. 210, "seat belt assembly anchorages."

NHTSA · USA3. Mai 199696V077000Modelljahre 1996Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumJP

エアバッグ

運転者席及び助手席のエアバッグにおいて、制御用モジュールのコンデンサーの耐熱性が 不足しているものがあるため、そのままの状態で使用を続けると、当該コンデンサーから 液漏れが発生することがあり、最悪の場合、回路が短絡して突然エアバッグが展開すると ともにシートベルトプリテンショナーが作動し、運転操作が妨げられるおそれがある。

MLIT · Japan8. Mai 20031210190Modelljahre 1994–1996Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Air bags

On certain passenger vehicles, the air bag electronic control unit (ecu) is designed to sense and discriminate frontal impact events, command air bag and seat belt pretensioner deployments in a timely manner, and perform continuous diagnostics of the air bag system in the vehicle. Due to the possible insufficient sealing of the bottom of an electrolyte capacitor, it is possible for it to leak electrolyte within the air bag ecu. Also, in high humidity environments, the operation of the vehicle air conditioner can cause rapid cooling of the ecu, which in turn may cause the formation of condensation with the unit.

NHTSA · USA14. Nov. 200202V308000Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumJP

エアバッグ

助手席のエアバックにおいて、ユニット内のアースが不適切なため、湿度が低いときに、 静電気が帯電し、そのままの状態で使用を続けると、エアバッグユニット内で放電が起り 、最悪の場合、当該エアバックが誤って展開するおそれがある。

MLIT · Japan16. Okt. 20012201900Modelljahre 1997–1998Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumUK

Unintentional deployment of passenger air bag

A build up of static electricity may cause unintentional deployment of the front passenger air bag.

DVSA · Vereinigtes Königreich4. Okt. 2001R/2001/099Modelljahre 1997–1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Air bags:Frontal

Vehicle description: Passenger vehicles. Static electricity can build up within the passenger-side air bag module and create enough of a charge to cause an inadvertent air bag deployment. Most of these inadvertent deployments have occurred in cooler, dry weather, and have generally included dusting or wiping of the dashboard, starting the car, or closing the door.

NHTSA · USA2. Juli 200101V222000Modelljahre 1998Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumJP

シートベルト

コンバーチブル車両の座席ベルトにおいて、肩ベルトガイドの形状が不適切なため、そ のままの状態で使用を続けると、当該座席ベルトが肩ベルトガイドとベルト巻取装置間で ねじれ、最悪の場合、当該座席ベルトを引き出せなくなるおそれがある。

MLIT · Japan20. Jan. 20001207780Modelljahre 1998Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumUK

Specification of seat belt tongue

The tongue at the end of the seat belt has not been hardened to the correct specification.

DVSA · Vereinigtes Königreich23. Mai 1996R/1996/061Modelljahre 1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumJP

座席

運転者席及び助手席のシートバックフレーム(座席の背もたれの内部にある鉄製の骨組 み)とリクライニング装置の取付け部に溶接されていないものがあるため、取付け部に過 大な力が加わると、当該座席の背もたれが倒れるおそれがある。

MLIT · Japan23. März 19951205540Modelljahre 1994–1995Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats And Restraints

Note: 1994-95 3 and 5 door models and 1995 convertibles. The seat assemblies may be missing one or more of the arc welds that join the seat back recliner mechanism to the seat back frame. This could result in the seat back falling backwards if the vehicle is impacted from the rear. Sudden failure of a driver seat back could occur without prior warning and cause the driver to lose control, resulting in a possible crash. Correction: Seat backs will be inspected and replaced if required.

Transport Canada16. Feb. 19951995028Modelljahre 1994–1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumUK

Missing welds on seat frame

On some vehicles some welds may be missing from the back frames of the front seats.

DVSA · Vereinigtes Königreich3. Feb. 1995R/1995/002Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumUK

Front seat security.

The front seats may not lock properly on the longitudinal adjustment/mounting rails.

DVSA · Vereinigtes Königreich25. Nov. 1994R/1994/066Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats:Front assembly:Recliner

One or more of the arc welds can be missing on the seat back frame recliner.

NHTSA · USA18. Nov. 199494V226000Modelljahre 1994–1995Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumJP

座席

運転者席のシートレールに強度不足のものがあり、このままの状態で使用を続けると、最 悪の場合、車両後部等に追突されると当該レールが破損しシートが後方に転倒するおそれ がある。

MLIT · Japan20. Okt. 19941205351Modelljahre 1993–1994Im Original (Japanisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 "Classic" · 1978–1993900 NG · 1993–1997
RückrufMittelInnenraumUK

Cracking of driving seat rails

The driving seat rail on manually adjustable seats may be subject to fatigue cracking.

DVSA · Vereinigtes Königreich16. Sept. 1994R/1994/050Modelljahre 1993–1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats And Restraints

On certain vehicles equipped with manually adjusted front seats, it is possible that the two (2) trigger springs mounted to the fore/aft adjustment lever on both front seats cannot develop sufficient force to properly lock the seat rails. This could result in the seat moving in the event of a collision. Correction: faulty springs will be replaced with ones with the appropriate trigger spring force.

Transport Canada8. Aug. 19941994127Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats And Restraints

There is a risk of fatigue cracks around the attachment bushings on the height adjusting mechanism in the driver's seat. In the event of a rear end collision, the height adjuster could break and allow the seat to fold down rearward. Correction: Dealers will replace the seat rails, on the driver's side, with new ones.

Transport Canada29. Juli 19941994121Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats

Two trigger springs mounted to the fore/aft adjustment lever do not develop sufficient force to properly lock the seat rails. After the seat is adjusted, this does not allow the seat rail lock to properly engage, which can cause the seat to move in a sudden stop or collision.

NHTSA · USA8. Juli 199494V127000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 NG · 1993–1997
RückrufMittelInnenraumNA

Seats

A weld in the seat rails was not made, increasing the risk of fatigue cracks forming around the attachment bushings on the height adjustment mechanism, causing the possibility of the height adjuster breaking in a rear end collision and allowing the seat to fold backwards.

NHTSA · USA13. Juni 199494V110000Modelljahre 1994Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 "Classic" · 1978–1993
RückrufMittelInnenraumNA

Seat belts:Front

There may be an insufficient permanent lubrication in the buckle/release mechanism of the type 2 seat belt assemblies. This may cause front seat occupants to have difficulty in fully fastening seat belts, although they may seem to be fully fastened.

NHTSA · USA8. Dez. 198181V147000Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
900 "Classic" · 1978–1993
RückrufMittelInnenraumNA

Rückruf

Due to insufficient lubrication in the buckle/release mechanism of the front seat belt assemblies,occupants may have difficulty engaging the locking tongue in the latch when putting the belt on.

Transport Canada7. Dez. 19811981114Modelljahre 1981Im Original (Englisch) angezeigt · Übersetzung ausstehendDetails ansehen →
Ältere →

Quellen: NHTSA (USA, gemeinfrei), Transport Canada (Open Government Licence – Canada), DVSA (Vereinigtes Königreich, Open Government Licence v3.0), RappelConso und EU-Safety-Gate (Frankreich, Licence Ouverte 2.0), MLIT (Japan, Public Data License 1.0) und MOLIT (Südkorea, car.go.kr).