Free to read · free account to contributeSuccessor to Anticars (2000)

DodgeDodge Viper

1991–2017 · 5 generations · 8 documented defects · 3 markets
Generations

Service bulletins (TSBs) are repair instructions manufacturers send to their dealers about known problems. They are not safety recalls, but they often confirm a defect.

Model year
MarketAllEUUKNA
Viper (VX I) · 2012–2017
BulletinModerateElectricalNA

Bulletin

No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration

NHTSA · manufacturer bulletin10230183Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle

NHTSA · manufacturer bulletin10221813Model years 2016View details →
Viper (VX I) · 2012–2017
BulletinModerateElectricalNA

Bulletin

No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration

NHTSA · manufacturer bulletin10221597Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message

NHTSA · manufacturer bulletin10221154Model years 2016View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message

NHTSA · manufacturer bulletin10194007Model years 2016View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle

NHTSA · manufacturer bulletin10180203Model years 2016View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Power Windows Work Intermittently This bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation.

NHTSA · manufacturer bulletin10228126Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK

NHTSA · manufacturer bulletin10220071Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Power Windows Work Intermittently This bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation.

NHTSA · manufacturer bulletin10217612Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Liftgate Glass May Break This bulletin involves installing tape to the liftgate glass. Customers may experience the liftgate glass may break if the rear defogger - Electric Backlight (EBL) has been turned on. This is caused from the carbon fiber contacting the EBL grid.

NHTSA · manufacturer bulletin10217503Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Liftgate Glass May Break This bulletin involves installing tape to the liftgate glass. Customers may experience the liftgate glass may break if the rear defogger - Electric Backlight (EBL) has been turned on. This is caused from the carbon fiber contacting the EBL grid.

NHTSA · manufacturer bulletin10216322Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Power Windows Work Intermittently This bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation.

NHTSA · manufacturer bulletin10181492Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK

NHTSA · manufacturer bulletin10169219Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Power Windows Work Intermittently This bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation.

NHTSA · manufacturer bulletin10141292Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

Power Windows Work Intermittently This bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation.

NHTSA · manufacturer bulletin10140122Model years 2015View details →
Viper (VX I) · 2012–2017
BulletinModerateBrakesNA

Bulletin

Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure

NHTSA · manufacturer bulletin10139956Model years 2016View details →
Viper (VX I) · 2012–2017
BulletinModerateOtherNA

Bulletin

Road Noise Inside The Vehicle Cabin This bulletin involves installing inboard subwoofer speaker covers. The inboard 6 in. X 9 in. subwoofer speakers are missing covers which may contribute to addition road noise inside the cabin. The speaker cover also helps protect the speakers from environmental elements.

NHTSA · manufacturer bulletin10139791Model years 2014View details →
Viper (VX I) · 2012–2017
BulletinModerateSuspensionNA

Bulletin

Cruise Control Slow Or No Response This bulletin involves upgrading the software on the Steering Column Control Module (SCCM). A customer may experience, no response or slow response to cruise control switch activations. Issues will be experienced by the customers that activate/press the switches in a very fast manner.

NHTSA · manufacturer bulletin10136927Model years 2013View details →
Viper (VX I) · 2012–2017
BulletinModerateBodyNA

Bulletin

"power windows work intermittently this bulletin involves installing water shields, door harnesses and door modules due to water shorting the door module and possibly causing corrosion. Customers may experience intermittent loss of power window operation."

NHTSA · manufacturer bulletin10080085Model years 2015View details →
Viper · 2002–2006
BulletinModerateEngineNA

Bulletin

Emissions recall f07 for an incorrect vehicle emission control information (veci) label inadvertently installed. *tt

NHTSA · manufacturer bulletin10019544Model years 2006View details →
Viper · 2002–2006
BulletinModerateBrakesNA

Bulletin

Subject regarding discolored brake fluid. *tt

NHTSA · manufacturer bulletin631623Model years 2002View details →
Viper · 1995–2002
BulletinModerateBodyNA

Bulletin

This bulletin states that all factory installed equipment, such as a sunroof, meet the upper interior head protection requirements of fmvss 201. *tt

NHTSA · manufacturer bulletin619123Model years 2001View details →
Viper · 1995–2002
BulletinModerateEngineNA

Bulletin

Concerns on incorrect fault mature time - dtc $b7 leak detection pump solenoid circuit. *nlm

NHTSA · manufacturer bulletin6089148Model years 1998View details →
Viper · 1995–2002
BulletinModerateBrakesNA

Bulletin

Concerns with brake noise, squeal, moan, chatter from front and/or rear. *nlm

NHTSA · manufacturer bulletin6088775Model years 1997View details →
Viper · 1995–2002
BulletinModerateSuspensionNA

Bulletin

A new power steering fluid. *yc

NHTSA · manufacturer bulletin602893Model years 1999View details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).