Electrical system: problems reported by owners
16 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1988–1991). Most often named: ignition:switch (69%). Reported consequences: 9 fires.
🔔 Create a free account to get email alerts about Ford Festiva (all generations)
Everything about the Ford Festiva, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
16 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1988–1991). Most often named: ignition:switch (69%). Reported consequences: 9 fires.
53 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1994–1997), typically at around 101,000 miles. Most often named: frontal (79%). Reported consequences: 34 crashes, 1 fire, 29 injuries, 2 deaths.
35 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1992–1997). Most often named: ignition (43%), wiring:front underhood (20%). Reported consequences: 1 crash, 6 fires.
29 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1992–1997). Most often named: engine:gasoline (34%), cooling system (17%). Reported consequences: 2 crashes, 4 fires, 1 injury, 1 death.
23 owners in the United States reported problems with the fuel system of this car to NHTSA (model years 1992–1997), typically at around 293,000 miles. Most often named: storage:tank assembly (17%). Reported consequences: 2 crashes, 3 injuries.
The ignition switch may have excessive grease applied to its internal contacts. The heat from the arc discharge generated when the switch is operated can carbonize the grease, causing it to accumulate between the movable and fixed contacts and reducing the insulation inside the switch. If use continues in this condition, the contacts may become conductive, causing the switch to overheat and emit smoke. In the worst case, this could lead to a fire.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
DEFECT: THE (Takata) ABS PLASTIC FRONT SEAT BELT RELEASE BUTTONS ON THESE VEHICLES MAY BREAK ALLOWING PLASTIC PIECES TO FALL INTO THE BUCKLE ASSEMBLY. IF THIS SHOULD HAPPEN, A NO LATCH, FALSE LATCH OR FAILURE TO UNLATCH CONDITION COULD OCCUR CREATING THE RISK OF PERSONAL INJURY IN THE EVENT OF A CRASH OR SUDDEN STOP. CORRECTION: FRONT SEAT BELT BUCKLES WILL BE REPAIRED OR REPLACED AS NECESSARY.
Some vehicles may exhibit repeat misfire diagnostic trouble codes p0300 - p0304 after ssm 11543 (replacement distribution vane cover) has been performed. *tt
Engineering is investigating concerns related to the distributor on some vehicles. *tt
Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).