Motor vehicles - engine including fuel, lubrication and cooling systems
A valve in the cooling system can fail.
🔔 Create a free account to get email alerts about Hyundai Inster (all generations)
Everything about the Hyundai Inster, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
A valve in the cooling system can fail.
Due to insufficient design consideration of the motor cooling system's 3-way valve, excessive stress may be applied to the drive shaft, an internal component of the valve, causing it to be damaged. (1) Additionally, the capacity of the circuit protection fuse is large, so when the electrical circuit short-circuits, the circuit may not be properly interrupted, resulting in abnormal heat generation. (2) Therefore, if coolant leaks from the damaged drive shaft section and infiltrates the motor control unit, it may be heated by the abnormally heating electrical circuit and generate water vapor. If use continues in this state, the motor output may be limited, and in the worst case, the vehicle may become unable to drive. ※3-way valve: a valve that switches the coolant flow path within the motor cooling system.
The vehicle three way coolant valve may become defective during the vehicle operation. This may result in a risk of the affected component melting.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).