Free to read · free account to contributeSuccessor to Anticars (2000)

Mazda Tribute

2000–2011 · 2 generations · 19 documented defects · 4 markets
Generations
Model year
Tribute II · 2007–2011
RecallCriticalEngineNA

Fuel system, gasoline:Delivery:Fuel pump

Mazda North American Operations (Mazda) is recalling certain model year 2010-2011 Tribute vehicles manufactured March 3, 2009, to May 26, 2011. On vehicles with a 3.0L engine, the Fuel Delivery Module (FDM) may crack, causing a fuel leak.

NHTSA · United StatesOct 28, 201616V788000Model years 2010–2011View details →
Tribute I · 2000–2011
RecallCriticalBodyNA

Structure:Frame and members

Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.

NHTSA · United StatesApr 4, 201414V174000Model years 2001–2004View details →
Tribute I · 2000–2011Tribute II · 2007–2011
RecallCriticalEngineNA

Vehicle speed control:Cables

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

NHTSA · United StatesJul 27, 201212V357000Model years 2001–2008View details →
Tribute I · 2000–2011
RecallCriticalBrakesNA

Brakes

Certain vehicles may have been originally equipped with a brake master cylinder reservoir cap that could leak. If brake fluid leaks from the cap, it could come in contact with the ABS module wiring harness connector. The same vehicles were previously involved in campaign 2007119 to address potentially missing or misplaced seals in the wiring harness connector to the ABS module electronic control unit. If this repair wasn’t done correctly, brake fluid leaking from the reservoir cap could corrode the ABS module electrical connector. This could result in vehicle fire causing property damage and/or personal injury. Correction: Dealers will replace the brake master cylinder reservoir cap and modify the ABS electrical system. Note: Owners are advised to park the vehicle outdoors until the remedy is applied.

Transport CanadaJan 21, 20122012020Model years 2001–2002View details →
Tribute I · 2000–2011
RecallCriticalBrakesNA

Service brakes, hydraulic:Antilock/traction control/electronic limited slip:Control unit/module

Mazda is recalling certain model year 2001-2002 mazda tribute vehicles manufactured from april 20, 2000, through july 19, 2002. The brake master cylinder reservoir cap can leak brake fluid. If brake fluid leaks, it could come in contact with the antilock brake system (abs) module wiring harness connector.

NHTSA · United StatesJan 20, 201212V016000Model years 2001–2002View details →
Tribute I · 2000–2011
Tribute I · 2000–2011
RecallCriticalBrakesJP

主ブレーキ一般

制動装置において、倍力装置の製造工程が不適切なため、ダイヤフラムが倍力装置の本 体容器に噛み込まれた状態のものがあり、そのままの状態で使用を続けると、ブレーキ操 作の繰り返しによりダイヤフラムが破損することがあり、負圧が漏れ、制動力が低下する おそれがある。

MLIT · JapanDec 20, 20011107970Model years 2001Shown in the original Japanese · translation pendingView details →
Tribute I · 2000–2011
RecallCriticalEngineNA

Fuel System

On certain vehicles, the o-ring seals in the fuel line connector at the fuel filter outlet may have been damaged during assembly. This damage can result in fuel odor or possible fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire. Correction: Vehicles will be inspected and fuel line replaced if necessary.

Transport CanadaOct 2, 20002000212Model years 2001View details →
Tribute I · 2000–2011
RecallCriticalEngineNA

Fuel system, gasoline:Delivery

Vehicle description: Sport utility vehicles. The o-ring seals in the fuel line connector at the outlet end of the fuel filter were damaged when the line was connected to the filter during vehicle assembly. In some cases, this damage could result in a fuel odor, or possibly in fuel dripping from the connection.

NHTSA · United StatesSep 18, 200000V277002Model years 2001View details →
Tribute I · 2000–2011
RecallCriticalSuspensionNA

Wheels:Hubcap/cover

Vehicle description: Some 4x2 sport utility vehicles not equipped with an antilock braking system may have inadvertently been built with 4x4 rear hubs instead of 4x2 hubs. If the incorrect hubs are installed on a 4x2 vehicle, the rear wheels can loosen, or in some cases, separate from the vehicle.

NHTSA · United StatesSep 12, 200000V260002Model years 2001View details →
Tribute I · 2000–2011
RecallCriticalSuspensionNA

Steering: Steering wheel/handle bar

Vehicle description: Sport utility vehicles. These vehicles may have a mis-assembled or incorrectly manufactured nut that attaches the steering wheel assembly to the steering column. The nut could be upside down in the steering wheel assembly, which could overstress the steering column shaft when the nut is tightened. In addition, some of the nuts may have been cracked during manufacture resulting in the nut fracturing when it is tightened during vehicle assembly.

NHTSA · United StatesAug 9, 200000V223002Model years 2001View details →
Tribute II · 2007–2011
RecallModerateGearboxNA

Powertrain

A safety defect may exist in vehicles in which remanufactured automatic transmissions were installed as service replacement parts. The shift lever bolt may not have been torqued to the proper torque specification. If the improperly torqued shift level bolt loosens and backs out, the shift lever may disengage from the transmission without warning, and the transmission may not respond to the shifter selection movement by the operator. This could result in the loss of transmission gear selection, and possible unintended vehicle movement, which would increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect, and if necessary, replace the shift lever assembly and/or the shift level bolt torqued to the proper specification.

Transport CanadaOct 19, 20152015490Model years 2008View details →
Tribute II · 2007–2011
RecallModerateGearboxNA

Power train:Automatic transmission:Lever and linkage:Floor shift

Mazda North American Operations (Mazda) is recalling certain model year 2008 Tribute vehicles manufactured February 9, 2007 to April 22, 2008. The affected vehicles have had their CD4E transmission replaced with remanufactured one that was rebuilt between June 11, 2015 through July 15, 2015. These service repair part transmissions have a shift lever bolt that may not be properly tightened. As a result, the shift control lever could disengage from the transmission without warning.

NHTSA · United StatesOct 19, 201515V677000Model years 2008View details →
Tribute II · 2007–2011
RecallModerateGearboxNA

Hybrid propulsion system

Mazda North American Operations (Mazda) is recalling certain model year 2008 Mazda Tribute Hybrid vehicles manufactured October 10, 2006, to May 23, 2008. The coolant pump for the hybrid system may fail, resulting in the hybrid electronics overheating.

NHTSA · United StatesSep 10, 201414V552000Model years 2008View details →
Tribute II · 2007–2011
RecallModerateSuspensionNA

Steering:Electric power assist system

Mazda North American Operations (Mazda) is recalling certain model year 2008-2011 Tribute vehicles manufactured October 5, 2006, through September 11, 2010. The affected vehicles have a steering torque sensor that may not be able to properly detect driver steering input. As a result, the system could remove the Electric Power Steering (EPS) assist.

NHTSA · United StatesMay 29, 201414V282000Model years 2008–2011View details →
Tribute I · 2000–2011
RecallModerateEngineEU

null There may be inadequate clearance between the engine cover and the cruise control cable, which could…

null There may be inadequate clearance between the engine cover and the cruise control cable, which could allow the throttle to stick in the fully open position when the accelerator pedal is fully or almost-fully depressed. If this occurs, it would be difficult to stop or to decelerate, which could lead to an accident. This risk exists regardless of whether or not the cruise control is used.

EU Safety GateNov 7, 2012A12/1697/12Model years 2000–2004View details →
Tribute I · 2000–2011
RecallModerateEngineUK

Possible unintentional increase of engine speed

The throttle valve may become stuck when the accelerator pedal is fully or almost fully depressed leading to possible unintentional increase of engine speed. This is caused by interference of the cruise control cable connector with the engine cover.

DVSA · United KingdomNov 7, 2012R/2012/107Model years 2001–2004View details →
Tribute I · 2000–2011
RecallModerateSuspensionJP

パワーステアリング

かじ取り装置のパワーステアリング用油圧ポンプのプーリー取り付けナットの締付け力及びプーリーの強度が不足しているため、当該プーリーの取り付けナットが緩む又はプーリーに亀裂が入るものがある。そのため、そのままの状態で使用を続けると、異音が発生し、最悪の場合、当該プーリーが破損又は外れてハンドル操作力が増大するおそれがある。

MLIT · JapanJun 8, 20062103200Model years 2002–2005Shown in the original Japanese · translation pendingView details →
Tribute I · 2000–2011
Tribute I · 2000–2011
RecallModerateBodyNA

Latches/locks/linkages:Hatchback/liftgate:Lock

Certain 2004-2005 sport utility vehicles and certain 2001-2003 sport utility vehicle having rear liftgate components serviced with 2004 equivalent components fail to comply with the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention components.' the rear liftgate latching system does not meet the inertia load requirement in one direction.

NHTSA · United StatesDec 23, 200404V605000Model years 2001–2005View details →
Tribute I · 2000–2011
RecallModerateEngineNA

Vehicle speed control:Cables

On certain sport utility vehicles, the accelerator cable may prevent the throttle from returning to the idle position.

NHTSA · United StatesDec 10, 200404V583000Model years 2002–2004View details →
Tribute II · 2007–2011
RecallModerateInteriorUK

Seat belt may not latch

It is possible that the driver and/or front seat passenger seat belt buckle cannot be latched or will not remain latched.

DVSA · United KingdomMay 7, 2004R/2004/002View details →
Tribute I · 2000–2011
Tribute I · 2000–2011
RecallModerateInteriorNA

Seat belts:Front:Buckle assembly

On certain sport utility vehicles, a post within the safety belt buckle covers could fracture, which could affect latch function, resulting in either a "no latch" or "partial latch" condition. In the "partial latch" condition, the buckle tongue can be inserted into the buckle and appear to be engaged, but will release from the buckle without the push button being depressed when a relatively low load is applied, such as when an occupant moves slightly in the seat.

NHTSA · United StatesDec 15, 200303V515000Model years 2001View details →
Tribute I · 2000–2011
RecallModerateElectricalUK

Stop lamps may not work

Oil has remained on the stop lamp switch bracket during assembly. The oil deposit can cause the switch contacts to to carbonise. Due to this the stop lamp may not turn on even if the brake pedal is depressed.

DVSA · United KingdomSep 13, 2002R/2002/118Model years 2001–2002View details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).