Timing belt
Numerous failures on the 1.8 L before 1997 and seizing of the tensioner pulley on the 1.9 TD.
🔔 Create a free account to get email alerts about Peugeot 406
This file gathers the known defects of the Peugeot 406, written and sourced by the community. Anyone can read; a free account lets you contribute. A defect earns the seal once enough reputable contributors have validated it.
Numerous failures on the 1.8 L before 1997 and seizing of the tensioner pulley on the 1.9 TD.
In 4.3% of the APK inspections of this car in the Netherlands this defect was found (52 out of 1,223 inspections in the past 12 months): 2.1 times as often as for cars of the same age.
5.2% of MOT tests of this car in Great Britain failed on this point (119 of 2,286 tests in 2025): 2.4 times as often as cars of the same age.
It has been identified that a batch of high pressure fuel injection pumps supplied as spare parts may not have been manufactured to specification. As a result a fuel leak may occur.
Due to improper software programming in the engine control unit, the fuel pump may continue to operate even after the ignition switch is turned off. As a result, fuel may leak from the injectors and accumulate in the cylinders, making cranking difficult. In the worst case, exhaust emissions may exceed standards when the engine is started, or the engine may fail to start.
Due to a potential fault in the engine management system an internal engine fuel leak via the injectors may occur following switching off. This would result in the engine failing to restart due to excess fuel being present in the inlet manifold or cylinders.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).