Timing belt
Numerous failures on the 1.8 L before 1997 and seizing of the tensioner pulley on the 1.9 TD.
🔔 Create a free account to get email alerts about Peugeot 406 (all generations)
Everything about the Peugeot 406, all generations together: defects, recalls, service bulletins and discussions. Pick a generation to narrow it down.
Numerous failures on the 1.8 L before 1997 and seizing of the tensioner pulley on the 1.9 TD.
In 4.3% of the APK inspections of this car in the Netherlands this defect was found (52 out of 1,223 inspections in the past 12 months): 2.1 times as often as for cars of the same age.
5.2% of MOT tests of this car in Great Britain failed on this point (119 of 2,286 tests in 2025): 2.4 times as often as cars of the same age.
À-coups : reprogrammation du boîtier d'injection.
Vérifier les fuites (le problème a été résolu par Peugeot en 1999).
It has been identified that a batch of high pressure fuel injection pumps supplied as spare parts may not have been manufactured to specification. As a result a fuel leak may occur.
Due to improper software programming in the engine control unit, the fuel pump may continue to operate even after the ignition switch is turned off. As a result, fuel may leak from the injectors and accumulate in the cylinders, making cranking difficult. In the worst case, exhaust emissions may exceed standards when the engine is started, or the engine may fail to start.
Due to a potential fault in the engine management system an internal engine fuel leak via the injectors may occur following switching off. This would result in the engine failing to restart due to excess fuel being present in the inlet manifold or cylinders.
Defects and discussions are filed under a generation: pick one above to add yours.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0).