Free to read · free account to contributeSuccessor to Anticars (2000)

SaabSaab 9-3

1998–2014 · 3 generations · 35 documented defects · 2 markets
Generations

Service bulletins (TSBs) are repair instructions manufacturers send to their dealers about known problems. They are not safety recalls, but they often confirm a defect.

Model year
MarketAllEUNAUK
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10190437Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.

NHTSA · manufacturer bulletin10171878Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detectortools.

NHTSA · manufacturer bulletin10154552Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10144451Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10137727Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket Compressed Natural Gas, Liquefied Petroleum Gas, or Bi-Fuel Systems. Technician will check for the Vehicle Emission Control Information Label. By using the engine Regular Production Option Code as well as the Vehicle Emission Control Information Label, technician can confirm the vehicle has a factory installed alternative fuel system or who the manufacturer is of the aftermarket fuel system.

NHTSA · manufacturer bulletin10127230Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block that have a possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, an out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10114831Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10112331Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.

NHTSA · manufacturer bulletin10112272Model years 2009View details →
9-3 I · 2002–2012
BulletinModerateEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

NHTSA · manufacturer bulletin10112116Model years 2009View details →
9-3 I · 1998–2003
BulletinModerateEngineNA

Bulletin

Customer satisfaction campaign 15411 regarding oil leakage at the oil thermostat plug. *tt

NHTSA · manufacturer bulletin633838Model years 2002View details →
9-3 I · 1998–2003
BulletinModerateEngineNA

Bulletin

To address an external oil or coolant leak from the cylinder head gasket when no engine overheating or other running complaints have occurred. *tt

NHTSA · manufacturer bulletin619562Model years 1999View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.

NHTSA · manufacturer bulletin11026017Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.

NHTSA · manufacturer bulletin11010490Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.

NHTSA · manufacturer bulletin11009532Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.

NHTSA · manufacturer bulletin11008906Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.

NHTSA · manufacturer bulletin11007115Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information for engine oil life monitor operation calculation.

NHTSA · manufacturer bulletin11002441Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.

NHTSA · manufacturer bulletin10242070Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.

NHTSA · manufacturer bulletin10233831Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.

NHTSA · manufacturer bulletin10233830Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.

NHTSA · manufacturer bulletin10222771Model years 2010View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.

NHTSA · manufacturer bulletin10197294Model years 2009View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This Preliminary information communicates theuse of Winter grade fuel during the warm months of 2020 and the potential rivabilityissues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concernsshould not be single events but should be multiple occurrences associated with hot days.

NHTSA · manufacturer bulletin10190413Model years 2009View details →
9-3 I · 2002–2012
BulletinMinorEngineNA

Bulletin

This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.

NHTSA · manufacturer bulletin10190417Model years 2009View details →
Older →

Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).