The steering wheel has insufficient drawing specifications for the fastening between the steering wheel and the steering column, so the fastening force at this joint is inadequate in some vehicles. As a result, steering inputs during driving can loosen the mounting nut, causing abnormal noise and play at the fitted section. If use continues in this condition, the fitting may come apart in the worst case, making the steering wheel impossible to operate.
In the airbag controller, a manufacturing defect in the backup power capacitor may cause an internal short circuit. As a result, if the controller's power is cut off during a collision, all airbags and seatbelt pretensioners may fail to deploy.
In the ignition switch, the grease used at the contact area is inappropriate. As a result, the heat from arc discharge when the movable contact separates from the fixed contact can carbonize the grease. If use continues in this state, the grease's insulating properties decline, and metal powder accumulates from wear of the movable contact. This can cause conduction between the contacts, and the resulting heat can make the grease emit smoke. In the worst case, it may lead to a fire.
In some vehicles equipped with an automated manual transmission (AGS), the brush material of the oil pump drive motor is unsuitable. As a result, under high-temperature and high-humidity conditions, the brushes may swell and cause poor sliding contact. If the vehicle continues to be driven in this state, the brushes may eventually seize, the motor may stop operating due to poor electrical conduction, the warning light may illuminate, and there is a risk that the vehicle will be unable to shift gears or to drive.
In the engine controller, if the control program is inappropriate and the restart by the ISG (Integrated Starter Generator, a generator with motor function) after idle stop fails, the protective function that switches to restarting the engine with the starter motor may not activate, and the engine may not be able to restart automatically.
In the engine controller, if the control program is inappropriate and the restart by the ISG (Integrated Starter Generator, a generator with motor function) after an idle stop fails, the protective function that switches to restarting the engine with the starter motor may not activate, so the engine may not restart automatically.
Because it was unclear who made pass/fail decisions in the final inspection process, including cases where uncommissioned inspectors (inspection assistants) made pass/fail judgments, inspections related to the safety standards for road transport vehicles may not have been conducted properly.
MLIT · JapanApr 6, 20061116530Model years 2000–2005Shown in the original Japanese · translation pendingView details →
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).