In the passenger-side airbag inflators, the moisture protection of the gas generant is inadequate, so the gas generant may deteriorate due to repeated changes in temperature and humidity. As a result, the inflator housing may rupture when the airbag deploys.
In the passenger-side airbag inflator, the moisture protection of the gas generant is inadequate. Repeated changes in temperature and humidity may cause the gas generant to deteriorate. As a result, the inflator housing may rupture when the airbag deploys.
In vehicles fitted with the washer fluid anti-freeze heater offered as a dealer option, the O-ring used to waterproof the heater control circuit unit has insufficient compression (squeeze). As a result, washer fluid may seep into the control circuit. This can cause the control circuit to melt from overheating and, in the worst case, may lead to a fire.
The lower ball joint, which connects the lower arm and knuckle arm of the front suspension, has some inappropriate lubrication properties inside. If use continues in this condition, the sliding parts may wear abnormally and become damaged. In the worst case, the lower ball joint could come off the knuckle arm, potentially rendering the vehicle unable to be driven.
The steering gear has an improperly welded joint in the bracket that secures the gearbox to the crossmember (the right-side one of the two locations). If the steering wheel is frequently turned while the vehicle is stationary, or similar operations are repeated, the welded portion of the bracket may be damaged, resulting in abnormal noise and increased steering wheel play. In the worst case, there is a risk that reliable steering may no longer be possible.
Sources: NHTSA (United States, public domain), Transport Canada (Open Government Licence – Canada), DVSA (United Kingdom, Open Government Licence v3.0), RappelConso and EU Safety Gate (France, Licence Ouverte 2.0), Japan's MLIT (Public Data License 1.0) and South Korea's MOLIT (car.go.kr).