On certain 318I, 318IC, 318IS, 325IC, 325IS, 325IX, 525I, 535I, 735I and 735IL vehicles, the fuel feed hose could harden and "set" over time due to engine compartment temperatures. If this "setting" occurs, it is possible that seepage between the hose and fitting could result because the clamp cannot provide sufficient sealing force to compensate for the hardening of the hose. Fuel seepage, in the presence of an ignition source, could result in an engine compartment fire. Correction: fuel feed hoses and associated clamps will be replaced with ones of a new design.
Transport Canada30 may 19941994096Años modelo 1989Mostrado en inglés original · traducción pendienteVer detalles →
Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
NHTSA · Estados Unidos11 abr 199494V066000Años modelo 1989Mostrado en inglés original · traducción pendienteVer detalles →
La avería o el fallo de un componente del sistema de refrigerante provoca un aumento significativo de la temperatura del refrigerante y, como consecuencia, un aumento de la presión del sistema.
NHTSA · Estados Unidos1 feb 199393V015000Años modelo 1984–1989Traducido automáticamente · original: inglésVer detalles →
On certain 318I, 325I and M3 vehicles, elevated pressure in the cooling system due to overheating could result in cracking of the heater core end piece. Should this happen, coolant could be expelled onto the lower right leg of the driver, possibly resulting in personal injury and/or fogging of the interior surfaces of the windows causing reduced driver vision. Correction: A thermistatic bypass valve will be installed to control coolant temperature in the heater core. Also, a new design radiator cap will be installed to control pressure and provide greater overflow.
Transport Canada19 jul 19931993100Años modelo 1984–1989Mostrado en inglés original · traducción pendienteVer detalles →
On certain 325IX vehicles, the oil dipstick tube attaching bracket may have been bent during the manufacturing process or during scheduled maintenance. This could possibly cause the dipstick to interfere with the throttle bellcrank lever's range of motion and prevent the lever from returning to the idle position after release of the accelerator pedal. Correction: Throttle bellcrank lever will be modified to provide sufficient clearance. Note: Vehicles with manual transmission only.
Transport Canada6 abr 19881988049Años modelo 1988Mostrado en inglés original · traducción pendienteVer detalles →
The oil dipstick tube attaching bracket may have been bent during production or scheduled maintenance, reducing the clearance between the dipstick ring and the throttle bellcrank lever.
NHTSA · Estados Unidos15 mar 198888V031000Años modelo 1988Mostrado en inglés original · traducción pendienteVer detalles →
The idle control valve which controls idle speed by varying the amount of intake air that bypasses the throttle plate is subject to backfire into the intake manifold. Such backfire can damage the valve and cause the idle valve plate to remain open. Consequence of defect: This will result in abnormally high idle speed.
NHTSA · Estados Unidos6 may 198585V058000Años modelo 1984Mostrado en inglés original · traducción pendienteVer detalles →
On certain 320I vehicles, crack in the exhaust system between the exhaust pipe and the catalytic converter could result in exhaust emissions which do not comply with CMVSS 1103.
Transport Canada22 dic 19831983121Años modelo 1981–1982Mostrado en inglés original · traducción pendienteVer detalles →
On certain 318I vehicles, improper starting procedure could cause a backfire into the intake manifold and damage internal components of the idle control valve. This could result in abnormally high idle speed and if warnings of increased engine noise level and tachometer reading are not heeded, a vehicle crash could occur.
Transport Canada6 jun 19851985072Años modelo 1984Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).