Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

BMW Serie 7 E32

1986–1994 · 3 averías documentadas · 4 mercados

Este expediente reúne las averías conocidas del BMW Serie 7 E32, redactadas y documentadas por la comunidad. La lectura es libre; una cuenta gratuita permite colaborar. Una avería recibe el sello cuando suficientes colaboradores reconocidos la han validado.

Los propietarios señalan a menudo problemas de engine and cooling en este coche (39 quejas), pero nadie ha explicado aún la causa. ¿La conoce?Redactar la ficha
Los propietarios señalan a menudo problemas de electrical system en este coche (12 quejas), pero nadie ha explicado aún la causa. ¿La conoce?Redactar la ficha

Averías más graves

Ver todo (3) →
m
CríticoMotorNA

Engine and cooling: problems reported by owners

39 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 1987–1993), typically at around 67,000 miles. Most often named: cooling system (46%), cooling system:radiator assembly (28%), engine:gasoline (18%). Reported consequences: 1 crash, 3 fires, 2 injuries.

✓ Análisis de Mecafile de datos oficiales1987–1993Mostrado en inglés original · traducción pendienteVer detalles →
m
CríticoElectrónicaNA

Electrical system: problems reported by owners

12 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1988–1993), typically at around 113,000 miles. Most often named: wiring:front underhood (42%), wiring:fuses and circuit breakers (25%), ignition:module (17%). Reported consequences: 5 fires, 1 injury.

✓ Análisis de Mecafile de datos oficiales1988–1993Mostrado en inglés original · traducción pendienteVer detalles →
m
CríticoMotorNA

Accelerator and cruise control: problems reported by owners

11 owners in the United States reported problems with the accelerator and cruise control of this car to NHTSA (model years 1988–1993). Most often named: accelerator pedal (18%). Reported consequences: 8 crashes, 2 injuries.

✓ Análisis de Mecafile de datos oficiales1988–1993Mostrado en inglés original · traducción pendienteVer detalles →

Últimas llamadas a revisión

Ver todo (24) →
LlamadaModeradoHabitáculoNA

Heater And Defroster

On certain vehicles, failure of a cooling system component such as thermostat, water pump or fan belt can result in a significant increase in coolant temperature and system pressure. Increased system pressure could result the formation of a crack or separation of a seam in the heater core end piece which would cause hot coolant to be expelled from the heater core. This hot fluid could contact car occupants resulting in possible personal injury and/or fogging of the interior window surfaces. Correction: Radiator cap will be replaced with a new design cap in order to avoid buildup of excessive pressure in the cooling system.

Transport Canada14 oct 19981998197Años modelo 1988–1993Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaModeradoMotorNA

Engine and engine cooling:Cooling system

Vehicle description: Passenger vehicles. A malfunction or failure of a coolant system component, such as a thermostat, water pump, or fan belt, can result in significantly increased coolant temperature and system pressure. If the indications of a critical overheating condition is not noticed by the driver, it is possible that damage to, or failure of, a coolant system component could occur.

NHTSA · Estados Unidos4 ago 199898V178000Años modelo 1988–1993Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaModeradoMotorNA

Engine

On certain 318IC, 318IS, 318TI, 325I, 325IC, 325IS, 525I, 525IT, 530I, 530IT, 540I, 740I, 740IL, 840CI and M3, the cruise control and throttle cable are attached to the same throttle valve actuating lever at the throttle housing. It is possible that the plastic bushing on either cable could break causing the outer cable housing to separate from the bushing. Throttle pedal application without cruise control engagement could cause the outer tube to catch on the edge of the broken bushing resulting in the throttle valve remaining partially open. If this were to occur, the car might not decelerate as expected and a crash could occut. Correction: A spring clip will be installed on the outer tube of each cable to prevent dislodgment from the bushing.

Transport Canada9 oct 19971997173Años modelo 1993Mostrado en inglés original · traducción pendienteVer detalles →

Últimos boletines técnicos

Ver todo (3) →
BoletínModeradoSuspensiónNA

Boletín

Bmw: A new technical process has been created for bmw to identify causes of steering complaints with a wide range of models. *rm

NHTSA · boletín del fabricante10036979Años modelo 1990Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoSuspensiónNA

Boletín

New style steering column. *tw

NHTSA · boletín del fabricante39557Años modelo 1990Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveElectrónicaNA

Boletín

Gas discharge "xenon" low beam headlights. *tw

NHTSA · boletín del fabricante39561Años modelo 1993Mostrado en inglés original · traducción pendienteVer detalles →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0).