On certain 318I, 318IS, 325I, 325IS, 525I, 525IT, 535I, 735I, 735IL, 750IL, 850I and M5, the locking tab for the airbag contact ring in the steering wheel assembly could break without warning. If this happens it is possible that the contact ring wiring could break. This would cause the readiness indicator lamp ("SRS" or "AIRBAG") to illuminate and in such a case the airbag would not be available for deployment in a frontal impact. Correction: Locking tab will be replaced with one of a different design.
Transport Canada7 oct 19961996159Años modelo 1991–1992Mostrado en inglés original · traducción pendienteVer detalles →
En determinados vehículos, la falla de un componente del sistema de refrigeración, como el termostato, la bomba de agua o la correa del ventilador, puede provocar un aumento significativo de la temperatura del refrigerante y de la presión del sistema. El aumento de presión podría causar la formación de una grieta o la separación de una costura en la pieza terminal del núcleo de la calefacción, lo que provocaría que el refrigerante caliente sea expulsado desde el núcleo de la calefacción. Este fluido caliente podría entrar en contacto con los ocupantes del vehículo, con posibles lesiones personales y/o empañamiento de las superficies interiores de los cristales. Corrección: El tapón del radiador será reemplazado por un tapón de nuevo diseño para evitar la acumulación de presión excesiva en el sistema de refrigeración.
Transport Canada14 oct 19981998197Años modelo 1988–1993Traducido automáticamente · original: inglésVer detalles →
On certain 525I, 535I, 735I, 735IL and 750IL vehicles, the front seat center fold-down armrest may contact and damage the seatbelt buckle if the seat back is moved forward to an upright position while the armrest is locked in the down position (horizontal). If this occurs, the release button may be held in the down position, preventing the seatbelt from being latched during the buckle-up operation. Non-latching of the seatbelts will increase the risk of personal injury in the event of a crash. Correction: Front seat safety belt buckles will be replaced with shorter ones that are not susceptible to damage by contact with the armrest.
Transport Canada27 feb 19901990037Años modelo 1988–1990Mostrado en inglés original · traducción pendienteVer detalles →
Under certain conditions, front seat center, fold-down arm rest may contact the safety belt buckle, causing damage to the release button and preventing the belt tongue from latching when buckling up.
NHTSA · Estados Unidos30 ene 199090V016000Años modelo 1988–1990Mostrado en inglés original · traducción pendienteVer detalles →
On certain 725I, 735IA and 750IL vehicles, on the front seats, the seatbacks may not have been fully seated on the recliner arms. This could result in looseness of, or noise in the seat. In extreme cases, during a severe rear impact, the seatback may not support the occupant and increase the risk of injury. Correction: Seatbacks will be inspected and properly seated if required.
Transport Canada25 ago 19881988124Años modelo 1988Mostrado en inglés original · traducción pendienteVer detalles →
The driver and/or passenger seatbacks may not have been fully attached to the seat base reclining arms (attaching brackets).
NHTSA · Estados Unidos11 ago 198888V135000Años modelo 1988Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).