Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

BuickBuick Rainier

2003–2007 · 12 averías documentadas · 1 mercados

Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.

Año del modelo
MercadoTodosNA
BoletínModeradoElectrónicaNA

Boletín

Esta nota informativa preliminar proporciona información al técnico sobre los vehículos que presentan un problema intermitente de «no gira el motor», «no arranca» o «se cala al arrancar», acompañado del encendido del indicador de seguridad. El técnico puede encontrar los códigos de avería B3055, B3

NHTSA · boletín del fabricante11039894Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Este comunicado de información preliminar proporciona información al técnico sobre los vehículos que presentan un problema intermitente de «no gira el motor», «no arranca» o «se cala al arrancar», acompañado del encendido del indicador de seguridad. El técnico puede encontrar los códigos de avería B3055, B3060, B3935, C0750, C0755, C0760, C0765 y/o C0775.

NHTSA · boletín del fabricante11021792Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Esta nota informativa preliminar proporciona información al técnico sobre los vehículos que presentan un problema intermitente de «no gira el motor», «no arranca» o «se cala al arrancar», acompañado del encendido del indicador de seguridad. El técnico puede encontrar los códigos de avería B3055, B3060 y/o B3935. El técnico no debe sustituir ninguna pieza para solucionar este problema. Si no puede reproducir el problema, pregunte al cliente si utiliza algún dispositivo de identificación por radiofrecuencia (RFID) cuando se produce el problema. El concesionario también debe remitir a sus clientes a la sección correspondiente del manual del propietario en la que se indica que el dispositivo cumple con los requisitos.

NHTSA · boletín del fabricante11007196Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Esta nota informativa preliminar proporciona información al técnico sobre los vehículos que presentan un problema intermitente de «no gira el motor», «no arranca» o «se cala al arrancar», acompañado del encendido del indicador de seguridad. El técnico puede encontrar los códigos de avería B3055, B3060 y/o B3935. El técnico no debe sustituir ninguna pieza para solucionar este problema. Si no puede reproducir el problema, pregunte al cliente si utiliza algún dispositivo de identificación por radiofrecuencia (RFID) cuando se produce el problema. El concesionario también debe remitir a sus clientes a la sección correspondiente del manual del propietario en la que se indica que el dispositivo cumple con los requisitos.

NHTSA · boletín del fabricante10237659Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. Ah, I see the user wants this translated, but the text is already in English, not Spanish. Let me give the translation below. Esta comunicación de Información Preliminar proporciona información al técnico sobre vehículos que presentan una falla intermitente de no arranque, no encendido o paro durante el arranque, con la luz de seguridad encendida. El técnico puede encontrar los Códigos de Diagnóstico de Problemas B3055, B3060 y/o B3935. El técnico no debe reemplazar ninguna pieza por esta falla. Si no logra reproducir la falla, pregunte al cliente si utiliza algún dispositivo de Identificación por Radiofrecuencia cuando la falla está presente. El concesionario también debe dirigir a sus clientes a la sección correspondiente de los Manuales del propietario que indica que el dispositivo cumple con la normativa.

NHTSA · boletín del fabricante10201252Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Esta comunicación de Información Preliminar proporciona información al técnico sobre vehículos que presentan un problema intermitente de no arranque, no encendido o paro durante el arranque, con la luz de seguridad encendida. El técnico puede encontrar los Códigos de Diagnóstico de Averías B3055, B3060 y/o B3935. El técnico no debe reemplazar ninguna pieza por este problema. Si no logra reproducir el problema, pregunte al cliente si utiliza algún dispositivo de Identificación por Radiofrecuencia cuando se presenta el problema. El concesionario también debe dirigir a sus clientes a la sección correspondiente de los manuales del propietario que indica que el dispositivo cumple con la normativa.

NHTSA · boletín del fabricante10201176Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Esta comunicación de Información Preliminar proporciona información al técnico sobre vehículos que presentan una falla intermitente de no arranque, no encendido o paro durante el arranque, con la luz de seguridad encendida. El técnico puede encontrar los Códigos de Diagnóstico de Falla B3055, B3060 y/o B3935. El técnico no debe reemplazar ninguna pieza por esta falla. Si no logra reproducir la falla, pregunte al cliente si utiliza algún dispositivo de Identificación por Radiofrecuencia cuando se presenta la falla. El concesionario también debe dirigir a sus clientes a la sección correspondiente de los manuales del propietario que indica que el dispositivo cumple con la normativa.

NHTSA · boletín del fabricante10178384Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.

NHTSA · boletín del fabricante10174861Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Esta comunicación de información preliminar informa al técnico de que algunos vehículos pueden tener encendida la luz de Service Engine Soon, fallo de encendido en el cilindro 1, 4, 6 o 7, y/o ruido de tic. El técnico seguirá primero el diagnóstico de la información de servicio. Si el diagnóstico de la información de servicio no aísla la causa de este problema, realice una prueba de compresión del sistema de desactivación de cilindros de gestión activa de combustible en la información de servicio. Si la compresión en funcionamiento del cilindro con fallo de encendido se mantiene por debajo de 25 libras por pulgada cuadrada, independientemente de que el solenoide del sistema de gestión activa de combustible reciba la orden de encendido o apagado, significa que un taqué de gestión activa de combustible está colapsado mecánicamente o atascado, o se desbloquea en cuanto se arranca el motor. Reemplace todos los taqués de gestión activa de combustible y todas las guías de taqués de plástico. Además, realice el diagnóstico y la prueba del colector de aceite del taqué de la válvula del sistema de desactivación de cilindros de gestión activa de combustible en la información de servicio. Si aísla un problema con el colector de aceite del taqué de la válvula, reemplácelo y vuelva a evaluar el problema. También se puede verificar el funcionamiento correcto de los taqués de gestión activa de combustible inspeccionando cuidadosamente los balancines y las válvulas de los cilindros 1, 4, 6 y 7 mientras se hace girar el motor de arranque o se hace funcionar el motor brevemente y de forma segura con las tapas de válvulas retiradas. Si la válvula o las válvulas de un cilindro con gestión activa de combustible dejan de moverse durante esta prueba, el taqué de gestión activa de combustible es la causa del problema. En las camionetas/SUV de tamaño completo de 2008-2009, o en las Chevrolet Tahoe de 2007-2009 con el paquete Police, reprograme el módulo de control del motor. En el Pontiac G8 de 2008-2009, el Camaro de 2010-2011 y las camionetas de tamaño completo de 2007-2010 con gestión activa de combustible, determine también si se ha instalado alguna vez el protector de la válvula de alivio de presión de la gestión activa de combustible que aparece en la versión más reciente de 10-06-01-008. En los automóviles de pasajeros con motor LS4, determine si se ha instalado la junta actualizada del cárter de aceite que aparece en la versión más reciente de 11-06-01-007.

NHTSA · boletín del fabricante10114354Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10113935Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10113191Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10113120Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10112436Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This Preliminary Information communication provides information to the technician that some vehicles may have a Service Engine Soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 Pounds per Square Inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management Valve Lifter Oil Manifold Diagnosis and Testing in Service Information. If it isolates a concern with the Valve Lifter Oil Manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 Full Size Truck/SUV or a 2007-2009 Chevrolet Tahoe with the Police Package reprogram the Engine Control Module. On the 2008-2009 Pontiac G8, 2010-2011 Camaro, and 2007-2010 Full Size Trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the LS4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10111986Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

This preliminary information communication provides information to the technician that some vehicles may have a service engine soon lamp, engine misfire on cylinder 1, 4, 6, or 7 and/or tick noise. Technician will follow service information diagnosis first. If service information diagnosis does not isolate the cause of this concern perform a cylinder deactivation active fuel management system compression test in service information. If the running compression of the misfiring cylinder stays below 25 pounds per square inch regardless of the active fuel management solenoid being commanded on or off, an active fuel management lifter is mechanically collapsed/stuck or unlocking as soon as the engine is started. Replace all active fuel management lifters, and all plastic lifter guides. Also perform the cylinder deactivation active fuel management valve lifter oil manifold diagnosis and testing in service information. If it isolates a concern with the valve lifter oil manifold, replace it and reevaluate the concern. The active fuel management lifters can also be monitored for proper operation by carefully inspecting the cylinder 1, 4, 6, and 7 rockers and valves while cranking or briefly and safely running the engine with the valve covers removed. If the valve or valves of an active fuel management cylinder stop moving while doing this test, the active fuel management lifter is causing the concern. For 2008-2009 full size truck/suv or a 2007-2009 chevrolet tahoe with the police package reprogram the engine control module. On the 2008-2009 pontiac g8, 2010-2011 camaro, and 2007-2010 full size trucks with active fuel management, also determine if the active fuel management pressure relief valve shield that is listed in the latest version of 10-06-01-008 has ever been installed. On passenger cars with the ls4 engine, determine if the updated oil pan gasket that is listed in the latest version of 11-06-01-007 has been installed.

NHTSA · boletín del fabricante10094982Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Diagnostic information on engine oil leak from rear of crankshaft. *tt 05-06-01*022 supplement - crankshaft oil leak repair instrumentions. *tt

NHTSA · boletín del fabricante10017385Años modelo 2005Mostrado en inglés original · traducción pendienteVer detalles →
BoletínModeradoElectrónicaNA

Boletín

Service engine soon light due a diagnostic trouble code p0606 diagnostic trouble code, operate in reduced engine power mode, and potentially stall. *tt

NHTSA · boletín del fabricante10017230Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveElectrónicaNA

Boletín

Este boletín de servicio proporciona información sobre algunos vehículos que pueden balancearse o desplazarse ligeramente hacia adelante o hacia atrás mientras están en Park (Estacionamiento) al arrancar después de un enfriamiento prolongado. Esta condición puede ir acompañada de un ruido de golpeteo (clunk). Se trata de un movimiento leve que se percibe más a menudo visualmente que al tacto, al observarlo desde el exterior y al usar la función de arranque automático, si está equipada.

NHTSA · boletín del fabricante11009088Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínLeveElectrónicaNA

Boletín

Este boletín de servicio proporciona información sobre algunos vehículos que pueden balancearse o moverse ligeramente hacia adelante o hacia atrás mientras están en Park (Estacionamiento) al arrancar después de un enfriamiento prolongado. Esta condición puede ir acompañada de un ruido de golpe seco. Se trata de un movimiento leve que se aprecia más a simple vista que al tacto, al observar el vehículo desde el exterior y usando la función de arranque automático, si está equipada.

NHTSA · boletín del fabricante10237387Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínLeveElectrónicaNA

Boletín

Este boletín de administración de garantías explica al técnico que, al utilizar las operaciones de mano de obra para reparación de cableado, puede ser necesario proporcionar información adicional al enviar transacciones de garantía global al realizar reparaciones de cableado.

NHTSA · boletín del fabricante10174304Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínLeveElectrónicaNA

Boletín

This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.

NHTSA · boletín del fabricante10159575Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveElectrónicaNA

Boletín

Este boletín administrativo de garantía explica al técnico que puede ser necesario proporcionar información adicional al enviar transacciones cuando se realicen reparaciones de cableado.

NHTSA · boletín del fabricante10154629Años modelo 2007Traducido automáticamente · original: inglésVer detalles →
BoletínLeveElectrónicaNA

Boletín

This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.

NHTSA · boletín del fabricante10140364Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveElectrónicaNA

Boletín

This warranty administration bulletin provides policy information on ACDelco replacement battery warranty procedures.

NHTSA · boletín del fabricante10139415Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
BoletínLeveElectrónicaNA

Boletín

This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.

NHTSA · boletín del fabricante10139200Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
Anteriores →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).