Lectura libre · cuenta gratuita para colaborarSucesor de Anticars (2000)

Citroën C1

2005–2022 · 2 generaciones · 15 averías documentadas · 2 mercados
Generaciones
Año del modelo
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014
LlamadaCríticoMotorUK

Possibility of fuel leak

It has been identified that during the fuel tank production process the joint between the tank and the fuel supply pipe assembly may not have been produced to the correct standard. Should this indeed be the case leakage from the supply pipe area of the fuel tank might occur.

DVSA · Reino Unido7 nov 2007R/2007/165Años modelo 2007Mostrado en inglés original · traducción pendienteVer detalles →
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
C1 I (PM/PN) · 2005–2014C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
LlamadaModeradoSuspensiónJP

かじ取ギヤボックス

ステアリングコラムシャフトとステアリングギアボックスを接続するボルトの取付けが不適切なため、当該取付部の結合力が不足しているものがある。そのため、かじ取り操作等により当該取付部が分離して、最悪の場合、かじ取り操作ができなくなるおそれがある。

MLIT · Japón11 ene 20191227720Años modelo 2018Mostrado en japonés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
C1 II (AB40) · 2014–2022
LlamadaModeradoSuspensiónUK

Steering column may fail unexpectedly

A component of the steering column may not be to specification and could fail. If this occurs there would be a loss of directional control.

DVSA · Reino Unido27 jun 2016R/2016/136Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
C1 II (AB40) · 2014–2022
LlamadaModeradoCarroceríaUK

Bumper may not perform as designed in a collision

Affected vehicles may have a small defect in the front bumper frame. This may affect its impact absorption in the even of a collision.

DVSA · Reino Unido30 ene 2015R/2015/024Años modelo 2014Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
LlamadaModeradoFrenosUK

Pérdida de control

La varilla del amortiguador delantero puede tener una avería interna que podría provocar que frene. Esto podría afectar negativamente a la suspensión delantera y a la capacidad del conductor para controlar el vehículo.

DVSA · Reino Unido19 dic 2014R/2014/173Años modelo 2013Traducido automáticamente · original: inglésVer detalles →
C1 I (PM/PN) · 2005–2014
C1 I (PM/PN) · 2005–2014
LlamadaModeradoSuspensiónUK

Rear cross-member may fail and cause driver to lose control

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

DVSA · Reino Unido25 feb 2014R/2014/028Años modelo 2013Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
LlamadaModeradoMotorUK

Engine may fail

It has been established that the con-rod (big end) shell bearings may not have been manufactured to specification. This could lead to premature deterioration of the shells and if not identified it could result in engine failure.

DVSA · Reino Unido14 nov 2012R/2012/129Años modelo 2010Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
LlamadaModeradoSuspensiónUK

Suspension may fail

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

DVSA · Reino Unido20 jun 2011R/2011/070Años modelo 2011Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
LlamadaModeradoMotorUK

Engine may fail

Due to incorrect machining it is possible that the crankshaft is not to the correct specification which can lead to insufficient lubrication of the crankshaft and subsequent engine failure.

DVSA · Reino Unido5 nov 2010R/2010/192Años modelo 2010Mostrado en inglés original · traducción pendienteVer detalles →
C1 II (AB40) · 2014–2022
LlamadaModeradoOtroUK

Accelerator pedal may fail to return to idle

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

DVSA · Reino Unido19 feb 2010R/2010/012Mostrado en inglés original · traducción pendienteVer detalles →
C1 I (PM/PN) · 2005–2014
LlamadaModeradoSuspensiónUK

Wheel studs may become loose

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

DVSA · Reino Unido28 jul 2009R/2009/075Años modelo 2009Mostrado en inglés original · traducción pendienteVer detalles →

Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).