Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10244964Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10230913Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10222084Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted.
NHTSA · boletín del fabricante11036200Años modelo 2027Mostrado en inglés original · traducción pendienteVer detalles →
Ciertos vehículos G70 (IK) y G80 (RG3) del año 2026 pueden mostrar un ruido de flujo de agua o burbujeo en las rejillas de aire centrales delanteras durante el arranque del motor. Esta condición puede deberse a aire atrapado dentro del sistema de refrigeración del motor. Siga el procedimiento a continuación para purgar correctamente el sistema de refrigeración y eliminar cualquier aire atrapado.
Certain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may becaused by trapped air within the engine cooling system. Technical Service Bulletin (TSB) 26-01-064G provides instructions to properly bleed the cooling system and remove any trapped air.
NHTSA · boletín del fabricante11036092Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).