Los boletines técnicos (TSB) son instrucciones de reparación que los fabricantes envían a sus concesionarios sobre problemas conocidos. No son llamadas a revisión de seguridad, pero a menudo confirman una avería.
Ciertos vehículos GV70 Electrificados (JK1A EV) y G80 Electrificados (RG3 EV) pueden mostrar una luz de advertencia falsa con códigos de diagnóstico de fallo (DTC) U151A8C y/o U151B8C cuando el vehículo se pone en modo listo. Este boletín proporciona el procedimiento para actualizar el software de la Unidad de Control del Vehículo (VCU) para abordar esta condición.
Certain GV70 (JK1, JK1A), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G-1 provides instructions to remove the old garnish and install new parts.
NHTSA · boletín del fabricante11031403Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1, JK1A), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
NHTSA · boletín del fabricante11031402Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1), GV80 (JX1) and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. Technical Service Bulletin (TSB) 26-01-003G provides instructions to remove the old garnish and install new parts.
NHTSA · boletín del fabricante11028325Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
NHTSA · boletín del fabricante11028323Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1, JK1A) vehicles may exhibit squeal noise during certain braking conditions. Follow the procedures in this bulletin to replace the front brake pads and radial springs to resolve the condition.
NHTSA · boletín del fabricante11024797Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1), GV80 (JX1), and GV80 Coupe (JX1) vehicles may exhibit a loose windshield glass garnish seal. This bulletin provides instructions to remove the old garnish and install new parts.
NHTSA · boletín del fabricante11024507Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1A) and GV70 Electrified (JK1A EV) vehicles may have an inoperative Wireless Phone Charger (WPC) due to an improper (non-NFC) part installation. This bulletin provides instructions to replace the Wireless Phone Charger with the Near Field Communication (NFC) feature.
NHTSA · boletín del fabricante11023669Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain 2023-2024MY GV70 Electrified (JK1A EV) and 2024MY GV70 (JK1A) vehicles may experience a call button getting stuck/no return condition. Follow the information in this bulletin for replacing the phone call button on the steering wheel.
NHTSA · boletín del fabricante11000779Años modelo 2024Mostrado en inglés original · traducción pendienteVer detalles →
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10244964Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
This updated Vehicle Control Unit (VCU) software package includes the following: Brake light logic update for regenerative braking. i-Pedal mode operation logic update. 12V battery saver logic update allows charging from EV Battery as low as 10% SOC when parked.
NHTSA · boletín del fabricante10244961Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10230913Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Some of the applicable vehicles may experience torque converter internal rivet damage and cracks. Symptoms may include a scratching noise, and in rare cases, an engine stall at idle or at creep speeds. This bulletin describes the procedure to replace the torque converter.
NHTSA · boletín del fabricante10222084Años modelo 2023Mostrado en inglés original · traducción pendienteVer detalles →
Some GV70 (JK1/JK1A) and GV70 Electrified (JK1 EV) vehicles may exhibit an inoperative power tailgate latch where the cinching function does not activate or the latch does not engage, due to interference between internal latch components. This bulletin provides instructions to replace the power tailgate latch with an improved part to address these conditions.
NHTSA · boletín del fabricante11039049Años modelo 2027Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted.
NHTSA · boletín del fabricante11036200Años modelo 2027Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1) vehicles may experience an intermittent A/C inoperative condition when the engine is started after the air conditioner has been operated with the ignition switch in the ON position. During engine cranking, a temporary low-voltage condition may cause the blower motor protection logic to activate, resulting in the A/C system turning OFF and remaining inoperative until the vehicle is restarted. This bulletin provides the procedure to update the ATCU (Air Temperature Control Unit) software to revise blower motor protection logic and prevent this condition from occurring.
NHTSA · boletín del fabricante11036199Años modelo 2027Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
NHTSA · boletín del fabricante11036097Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 (JK1A) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
NHTSA · boletín del fabricante11036099Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain 2026MY GV70 (JK1A) and 2026MY GV70 Electrified (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletins (TSBs) 26-01-017G-1 26-01-018G-1 provide instructions to perform a software update for the DCU module. Over-the-Air (OTA): This update can also be conducted via OTA. Guests cancomplete on their own if they have an active subscription to Genesis Connected Services. A visit to retailers is not required if the update is conducted via OTA.
NHTSA · boletín del fabricante11036096Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Ciertos vehículos G70 (IK) y G80 (RG3) del año 2026 pueden mostrar un ruido de flujo de agua o burbujeo en las rejillas de aire centrales delanteras durante el arranque del motor. Esta condición puede deberse a aire atrapado dentro del sistema de refrigeración del motor. Siga el procedimiento a continuación para purgar correctamente el sistema de refrigeración y eliminar cualquier aire atrapado.
Certain 2026MY G70 (IK) and 2027MY G80 (RG3) vehicles may exhibit a water-flowing or gurgling noise from the front center air vents during engine start-up. This condition may becaused by trapped air within the engine cooling system. Technical Service Bulletin (TSB) 26-01-064G provides instructions to properly bleed the cooling system and remove any trapped air.
NHTSA · boletín del fabricante11036092Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon's communication network. Technical Service Bulletin (TSB) 26-01-035G provides instructions to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
NHTSA · boletín del fabricante11031317Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizons communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
NHTSA · boletín del fabricante11031316Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-018G provides instructions to perform the software update for the DCU module.
NHTSA · boletín del fabricante11028981Años modelo 2026Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).