Mazda North American Operations (Mazda) está retirando del mercado ciertos vehículos Mazda6 de 2003-2008, MPV de 2004-2005, RX-8 de 2004 y Mazdaspeed6 de 2006-2007. Estos vehículos ya habían tenido sus infladores de los airbags frontales del pasajero reemplazados en una campaña de retiro anterior, con inflothers del mismo diseño. Los infladores pueden explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a alta humedad absoluta, temperatura y ciclos de temperatura.
Correction on my previous output: the word "inflothers" is a typo. The correct term is "infladores," so the sentence should read: "...con infl's del mismo diseño" → corrected below.
Mazda North American Operations (Mazda) está retirando del mercado ciertos vehículos Mazda6 de 2003-2008, MPV de 2004-2005, RX-8 de 2004 y Mazdaspeed6 de 2006-2007. Estos vehículos ya habían tenido sus infladores de los airbags frontales del pasajero reemplazados en una campaña de retiro anterior, con inflcon adores del mismo diseño. Los inflado res pueden explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a alta humedad absoluta, temperatura y ciclos de temperatura.
NHTSA · Estados Unidos31 oct 201919V781000Años modelo 2004–2005Traducido automáticamente · original: inglésVer detalles →
LlamadaCríticoHabitáculoNANo circular hasta la reparación
Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On July 9, 2019 this recall was expanded to include certain 2005-2009 RX-8 vehicles that were previously recalled under 17V-011 but have not yet been repaired. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
NHTSA · Estados Unidos15 jun 201818V404000Años modelo 2005–2006Mostrado en inglés original · traducción pendienteVer detalles →
LlamadaCríticoHabitáculoNANo circular hasta la reparación
Mazda North America Operations (Mazda) está retirando del mercado a nivel nacional ciertos vehículos Mazda6 de 2003 a 2008, Mazdaspeed6 de 2006 a 2007 y MPV de 2004. Mazda también está retirando del mercado vehículos MPV de 2005 a 2006 en Alabama, Arizona, Arkansas, California, Delaware, Distrito de Columbia, Florida, Georgia, Hawái, Illinois, Indiana, Kansas, Kentucky, Luisiana, Maryland, Misisipi, Misuri, Nebraska, Nevada, Nueva Jersey, Nuevo México, Carolina del Norte, Ohio, Oklahoma, Pensilvania, Carolina del Sur, Tennessee, Texas, Virginia, Virginia Occidental, Puerto Rico, Samoa Americana, Guam, Islas Marianas del Norte (Saipán) e Islas Vírgenes de los Estados Unidos. El 9 de julio de 2019, esta retirada se amplió para incluir ciertos vehículos RX-8 de 2004 a 2011 que fueron retirados previamente bajo 16V-354 pero que aún no han sido reparados. Estos vehículos están equipados con ciertos infladores de airbag ensamblados como parte de los módulos de airbag frontal del pasajero, y utilizados como equipo original o de reemplazo. En caso de un choque que requiera la activación del airbag frontal del pasajero, estos infladores de airbag del pasajero podrían explotar debido a la degradación del propelente que ocurre tras una exposición prolongada a la humedad absoluta y a ciclos de temperatura.
NHTSA · Estados Unidos15 jun 201818V402000Años modelo 2004–2006Traducido automáticamente · original: inglésVer detalles →
Note: The recall for the 2005-2008 RX-8 models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">2018038 (Mazda Recall 2018A)</a>, and the recall for the 2005-2006 MPV models has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag inflator. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the passenger frontal airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Transport Canada10 ene 20172017011Años modelo 2005–2006Mostrado en inglés original · traducción pendienteVer detalles →
Note: The recall for the 2004 RX-8 model has been superseded by <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018038">recall 2018-038 (Mazda Recall 2018A)</a>, and the recall for the 2004 MPV model has been superseded by recall <a href="http://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/detail.aspx?lang=eng&&rn=2018578">2018578 (Mazda Recall 2618F)</a>. On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: Dealers will replace the airbag inflator. Additional note: Canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.
Transport Canada26 may 20162016259Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, the front passenger-side airbag was improperly wired and may not provide adequate protection in the event of a crash. Correction: Dealer will install a short wiring harness kit.
Transport Canada19 feb 20042004067Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicle, the airbag warning labels on the sun visors are English only. This does not comply with the requirements of CMVSS 208. Correction: Mazda will mail owners corrected replacement labels and installation instructions.
Transport Canada29 jul 20032003178Años modelo 2002–2003Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, the diffuser may come off the inflator for the passenger air bag during deployment due to improper welding. Under these conditions, expanded gas cannot be supplied to the bag and may not deploy during a frontal crash. Correction: Dealers will replace the passenger side airbag with a correct one.
Transport Canada2 ago 20022002145Años modelo 2001Mostrado en inglés original · traducción pendienteVer detalles →
En el airbag del asiento del copiloto, algunas unidades presentan una soldadura inadecuada en la unión entre el difusor (dispositivo de dispersión) dentro del inflador (dispositivo de inflado) y el cuerpo del generador de gas (generador de gas). Por ello, al activarse el airbag, esa unión puede desprenderse y el difusor soltarse, de modo que no se puede suministrar gas de inflado a la bolsa; en consecuencia, el airbag no se despliega y existe el riesgo de causar lesiones excesivas al ocupante en caso de colisión frontal.
En vehículos con asiento elevable instalado en el asiento del copiloto, el extremo de la bisagra del reposapiés plegable del asiento elevable queda expuesto. Por ello, si se baja el asiento sin desplegar el reposapiés, el pie u otra parte del cuerpo puede entrar en contacto con dicho extremo de la bisagra y, en el peor de los casos, causar lesiones en el pie u otra parte del cuerpo.
As a result of an ncap test, certain minivans fail to comply with the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." the front passenger seat air bag was not correctly wiring.
NHTSA · Estados Unidos17 feb 200404V073000Años modelo 2004Mostrado en inglés original · traducción pendienteVer detalles →
Certain minivans fail to comply with the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." some of these vehicles were produced with air bag warning labels intended for the canadian market. Thus, the labels contain warnings in both english and french. As a result, the area of the english warning is only 16 square centimeters, as opposed to the 30 square centimeters required by the standard.
NHTSA · Estados Unidos9 mar 200404V109000Años modelo 2003–2004Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).