Electrical system: problems reported by owners
30 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2004–2010), typically at around 106,000 miles. Reported consequences: 1 crash, 5 fires.
Todo sobre el Mitsubishi Endeavor, todas las generaciones juntas: averías, llamadas a revisión, boletines técnicos y debates. Elige una generación para afinar.
30 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 2004–2010), typically at around 106,000 miles. Reported consequences: 1 crash, 5 fires.
28 owners in the United States reported problems with the engine and cooling of this car to NHTSA (model years 2004–2007), typically at around 63,000 miles. Most often named: cooling system (32%), cooling system:radiator assembly (18%). Reported consequences: 1 crash, 1 fire, 2 injuries.
28 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 2004–2008), typically at around 64,000 miles. Most often named: automatic transmission (32%). Reported consequences: 6 crashes.
24 propietarios en los Estados Unidos informaron a la NHTSA sobre problemas con los airbags de este automóvil (años modelo 2004–2011), normalmente a unos 88 000 millas. El más mencionado: frontal (17 %). Consecuencias reportadas: 18 choques, 18 lesiones.
22 owners in the United States reported problems with the brakes of this car to NHTSA (model years 2004–2011), typically at around 80,000 miles. Reported consequences: 4 crashes.
Problema: En determinados vehículos, es posible que falte información en francés en la etiqueta de conformidad. Las palabras y abreviaturas que figuran en la etiqueta para «TIRES», «RIMS», «WITH», «FR» y «RR» aparecen únicamente en inglés, cuando deberían figurar como «TIRES/PNEUS», «RIMS/JANTES», «WITH/AVEC», «FR/AVT» y «RR/ARR». La normativa canadiense exige que esta información figure en la etiqueta tanto en inglés como en francés. Riesgo para la seguridad: Estos pequeños errores no afectan a la seguridad del vehículo. Medidas correctivas: No se trata de una campaña de retirada. Mitsubishi ha corregido la etiqueta de conformidad de todos los vehículos nuevos.
Certain vehicles, operated in areas where road salts are frequently used in winter, may be exposed to road debris (mud) mixed with road salt. This material can become trapped between a reinforcing bracket and the fuel filler pipe, potentially causing corrosion. Over time, corrosion could create a leak in the fuel filler pipe that could result in fuel leakage when fueling the vehicle. Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury. Correction: Dealers will replace the fuel filler pipe of vehicles equipped with the first-generation version. Vehicles assembled with the second-generation filler pipe will be inspected and, if severe corrosion on the fuel filler pipe is observed, the pipe will be replaced with a third-generation version. For vehicles where corrosion of the fuel filler pipe is not observed, an anti-corrosion wax-like material will be applied to the filler pipe, and the inner wheel well shield will be replaced with an updated part that provides improved protection against mud intrusion and accumulation. ** Note: This recall supersedes recall 2010050.**
On certain vehicles, the software programming in the Heating, Ventilation, Air Conditioning (HVAC) controller may allow a combination of numerous data inputs to temporarily overload the calculation capacity of the controller, resulting in incorrect signals to be transmitted to the heater case mode door. This may cause the mode door to move to unselected positions during heater operation until the controller recovers and returns to proper operation. Over time, this excessive movement may damage the mode door shaft. These conditions could affect defroster performance, resulting in delayed clearing of the windshield, which could compromise safe vehicle operation and increase the risk of a crash. Correction: Dealers will replace the HVAC controller assembly, inspect the mode-door shaft for possible damage, and repair the mode-door shaft if necessary.
Este boletín de servicio técnico se envió a los concesionarios con el fin de proporcionarles los procedimientos generales de inspección previa a la entrega (PDI), tanto técnicos como de detalle, para los vehículos Mitsubishi del año de fabricación 2023 (excepto el Outlander PHEV).
El presente Boletín de Servicio Técnico informa a los concesionarios de que pueden encontrar una mancha o una zona opaca en los paneles de la carrocería tras retirar la lámina de transporte, debido a una instalación incorrecta de la misma. Este Boletín de Servicio Técnico indica a los concesionarios el procedimiento de reparación para eliminar la mancha.
Esta nota de información técnica se envió a los concesionarios para informarles de que MMNA ha recibido recientemente información de Mitsubishi Motors Corporation (MMC) sobre los efectos del proceso de pintura al agua (WB) en los vehículos Mitsubishi.
Las averías y los debates se clasifican por generación: elige una arriba para añadir el tuyo.
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).