Bentley is recalling 14 my 1980-1982 bentley t2, my 1980-1987 continental, and mulsanne, my 1980-1982 rolls-royce silver shadow ii, my 1980 silver wraith ii, my 1980-1987 corniche, silver spirit and my 1981-1987 silver spur passenger vehicles. A fuel hose assembly, available as a replacement part, has been found to have a defect in the material specification of the rubber hose. The hose may degrade under certain operating conditions resulting in a fuel leak.
NHTSA · Estados Unidos7 nov 200808V585000Años modelo 1980–1987Mostrado en inglés original · traducción pendienteVer detalles →
High under-hood and under-floor temperatures may cause failure of some hydraulic brake hoses. This condition will cause a loss of hydraulic fluid from the dual hydraulic system and impair braking efficiency. A potential fire hazard also exists.
Transport Canada20 ene 19801980092Años modelo 1980Mostrado en inglés original · traducción pendienteVer detalles →
On certain vehicles, fuel vapors stored in the vehicle's evaporative emission control system could enter a body cavity behind the rocker panel on the driver's side. If vapor is emitted and collects in the cavity, the resulting air/vapor mixture could be ignited if the central window operating mechanism is activated. Correction: Dealers will install a plated mild steel extension pipe to the leak detection filter of the vehicle which will ensure that any vapor emanating from the evaporative emission control system is vented to the outside.
Transport Canada18 abr 20012001151Años modelo 2000–2001Mostrado en inglés original · traducción pendienteVer detalles →
Vehicle description: Passenger vehicles. Fuel vapors stored in the vehicle's evaporative emission control system could enter a body cavity behind the rocker panel on the driver's side.
NHTSA · Estados Unidos16 abr 200101V096000Años modelo 2000–2001Mostrado en inglés original · traducción pendienteVer detalles →
Vehicle description: Passenger vehicles. The bolts attaching the lower steering column to the intermediate steering coupling can contact the brake hydraulic system pipes located in the engine compartment.
NHTSA · Estados Unidos4 ago 199797V122000Años modelo 1994–1998Mostrado en inglés original · traducción pendienteVer detalles →
A wire inside the electric motor driven gearbox actuator may come into contact with the inner face of the assembly case, causing fretting of the wire and also causing the fuse protecting the circuit to blow if this occurs it would not be possible to engage the desired gear range and may not be possible to restart the vehicle after the engine has been switched off. If "park" is not engaged and the driver does not apply the parking brake, a roll away could occur. Correction: Affected wire will be repositioned.
Transport Canada28 sept 19951995169Años modelo 1992–1996Mostrado en inglés original · traducción pendienteVer detalles →
An incorrectly positioned wire within the electrically operated gearbox actuator can chafe against the cover causing the transmission selector fuse to blow.
NHTSA · Estados Unidos17 ago 199595V159000Años modelo 1992–1996Mostrado en inglés original · traducción pendienteVer detalles →
The lower steering column linkage heat shield can come in contact with a brake hydraulic system pipe mounted to the engine assembly, eventually resulting in a hydraulic fluid leak.
NHTSA · Estados Unidos3 abr 199595V070000Años modelo 1995Mostrado en inglés original · traducción pendienteVer detalles →
There is a possibility of a foul condition between the lower steering linkage heatshield and a high pressure hydraulic pipe that feeds the front brakes on left hand drive naturally aspirated cars.
DVSA · Reino Unido31 mar 1995R/1995/027Años modelo 1994–1995Mostrado en inglés original · traducción pendienteVer detalles →
The micro-switch for the stop lamps may fail, causing the lamps to remain continuously illuminated or to fail to illuminate. If this occurs, application of the brakes would not be signalled to following vehicles, creating the potential for a collision. Correction: Stop lamp switch will be replaced with an improved switch.
Transport Canada7 abr 19891989049Años modelo 1986–1989Mostrado en inglés original · traducción pendienteVer detalles →
Heat generated by catalytic converters may cause deterioration of hydraulic brake hoses on certain vehicles. Brake hose may fail, resulting in loss of hydraulic fluid from the dual hydraulic system.
NHTSA · Estados Unidos30 may 198080V066000Años modelo 1980Mostrado en inglés original · traducción pendienteVer detalles →
Fuentes: NHTSA (Estados Unidos, dominio público), Transport Canada (Licencia de Gobierno Abierto – Canadá), DVSA (Reino Unido, Open Government Licence v3.0), RappelConso y Safety Gate de la UE (Francia, Licence Ouverte 2.0), MLIT (Japón, Licencia de Datos Públicos 1.0) y MOLIT (Corea del Sur, car.go.kr).