Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Audi R8

2006–2024 · 1 générations · 1 défauts documentés · 3 marchés
Générations
Toutes les générationsR82006–20241231083

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousNA
BulletinCritiqueHabitacleNA

Bulletin

This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.

NHTSA · bulletin constructeur11034642Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueHabitacleNA

Bulletin

This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.

NHTSA · bulletin constructeur11029369Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueHabitacleNA

Bulletin

This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage.

NHTSA · bulletin constructeur10165539Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueHabitacleNA

Bulletin

This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). 2008-2021A3, 2015-2021A3 Cabrio, 2005-2016 A3 Sportback, 1999-2021 A4, 2010-2021 A4 allroad, 1999-2012 A4 Avant, 2003-2009 A4 Cabrio, 2010-2021 A5 Cabrio, 2008-2021 A5 Coupe, 2018-2021 A5 Sportback, 1999-2021A6, 1999-2011A6 Avant, 2008-2020 A7, 1999-2021 A8, 2008-2019 e-tron, 2019-2021 e-tron quattro, 2015-2021 Q3, 2009-2021 Q5, 2007-2021 Q7, 2019 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2021 S5 Cabrio, 2008-2021 S5 Coupe, 2018-2021 S5 Sportback, 2007-2021 S6, 2008-2020 S7, 2007-2009 S8, 2018-2021 SQ5, 2000-2021 TT Coupe, 2001-2021 TT Roadster, 2012 TT/RS Coupe

NHTSA · bulletin constructeur10161273Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueBoîteNA

Bulletin

Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.

NHTSA · bulletin constructeur10128471Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueMoteurNA

Bulletin

Supersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.

NHTSA · bulletin constructeur10123969Années modèle 2011–2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinCritiqueMoteurNA

Bulletin

Supersedes Technical Service Bulletin Group 01 number 12-51 dated July 18, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300C (572F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperature of the exhaust gas and of the catalyst increases quickly. The afterburning in the exhaust manifold before catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase the engine has increased idle speed, may have increased vibrations, and a different sound characteristic. Depending on conditions the time of the catalyst heating phase varies.

NHTSA · bulletin constructeur10122803Années modèle 2011–2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

This bulletin proides service information when there is a prompt to take over the steering wheel (hands off detection).

NHTSA · bulletin constructeur11039216Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréMoteurNA

Bulletin

Ce bulletin fournit des informations pour tous les moteurs à essence lorsque le témoin MIL est allumé et que le code DTC P240700 est enregistré - Pompe de détection de fuite de carburant.

NHTSA · bulletin constructeur11039214Années modèle 2023Traduit automatiquement · original : anglaisVoir le détail →
BulletinModéréSuspensionNA

Bulletin

This bulletin provides information about vibrations and rotational steering vibrations.

NHTSA · bulletin constructeur11038042Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information when there are cracks on the friction ring surface on ceramic brake discs.

NHTSA · bulletin constructeur11036924Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information about the general approach for brake vibration concerns.

NHTSA · bulletin constructeur11036921Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information for all models regarding brake sounds.

NHTSA · bulletin constructeur11036911Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).

NHTSA · bulletin constructeur11036909Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information when there is corrosion on the friction survace of steel brake discs.

NHTSA · bulletin constructeur11036906Années modèle 2015–2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréMoteurNA

Bulletin

This bulletin provides information when the fuel tank cap seal is leaking; DTC P044200, P045600 and/ or P00EF00 in stored in the ECM.

NHTSA · bulletin constructeur11034668Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

This bulletin is informational and contains information on the various warning lamps that may appear.

NHTSA · bulletin constructeur11032194Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

This bulletin provides informaiotn regarding squeaking noises when steering or maneuvering.

NHTSA · bulletin constructeur11030983Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréHabitacleNA

Bulletin

The National Highway Traffic Safety Administration (NHTSA) has issued an urgent warning regarding counterfeit replacement airbag inflators that are being installed in used vehicles.

NHTSA · bulletin constructeur11030980Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

This bulletin provides information when the air conditioner is not working, or has a restricted function; leak at the O-ring.

NHTSA · bulletin constructeur11028434Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

This bulletin provides information about vibrations and rotational steering vibrations.

NHTSA · bulletin constructeur11028405Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréMoteurNA

Bulletin

This bulletin provides information regarding UV leak additive for finding oil leaks.

NHTSA · bulletin constructeur11028398Années modèle 2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This Repair Authorization requests that technicians contact the Technical Assistance Center before proceeding with any brake repairs on vehicles with Cceramic brakes.

NHTSA · bulletin constructeur11027374Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

This bulletin provides information when the AC is not workoing; leak on air conditioner compressor.

NHTSA · bulletin constructeur11026275Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

This bulletin provides information when there are cracks on the friction ring surface on ceramic brake discs.

NHTSA · bulletin constructeur11025404Années modèle 2023Affiché en anglais d’origine · traduction en attenteVoir le détail →
Plus anciens →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).