Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Bentley Continental GT II

2011–2018 · 0 défauts documentés · 2 marchés

Ce dossier rassemble les défauts connus de la Bentley Continental GT II, rédigés et sourcés par la communauté. La lecture est libre ; un compte gratuit permet de contribuer. Un défaut reçoit le sceau quand assez de contributeurs reconnus l’ont validé.

Défauts les plus graves

Aucun défaut documenté pour cette sélection.

Derniers rappels officiels

Tout voir (8) →
RappelCritiqueÉlectroniqueJP

配線

エンジンルーム隔壁にバッテリーケーブル端子を固定するスタッドボルトにおいて、当該ケーブルを固定するナットの締め付けトルクが不適切なため、走行中の振動によりナットが緩むものがある。そのため、そのままの状態で使用を続けると、バッテリーケーブル端子が接触不良となり、エンジンが始動不良となるほか、接触不良から抵抗値が上がることで発熱し、最悪の場合、火災に至るおそれがある。

MLIT · Japon27 nov. 20151222550Années modèle 2011–2014Affiché en japonais d’origine · traduction en attenteVoir le détail →
RappelCritiqueÉlectroniqueEU

null The battery cable may be loose

null The battery cable may be loose. In very rare cases, the electrical connection can overheat whilst the vehicle is in use and lead to a vehicle fire.

Safety Gate · UE29 oct. 2015A12/1347/15Années modèle 2012–2015Affiché en anglais d’origine · traduction en attenteVoir le détail →

Derniers bulletins techniques

Tout voir (37) →
BulletinMineurSuspensionNA

Bulletin

Tyre tread/sidewall crack(s)

NHTSA · bulletin constructeur11015371Années modèle 2017Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurCarrosserieNA

Bulletin

15MY power boot PDI check (SC15/05) Technical background A significant design change has occurred on Continental GT and Continental GT Convertible power boot systems built from 15MY onwards. The striker is now powered whereas previously the latch was powered, and the ECU software for the close-cycle of the boot lid is modified. Due to these fundamental changes a different approach is required in rectifying issues. In a few cases, during manufacturing profile adjustment to the boot lid, the boot lid function may have been compromised The Pre Delivery Inspection (PDI) for 15MY onwards includes a specific function check for the power boot. In the event of a power boot failure to latch event during this specific 15MY PDI check then the rectification detailed for outcome of this campaign should be applied Remedy Check boot lid function and if necessary adjust boot lid striker and report adjustment

NHTSA · bulletin constructeur10170167Années modèle 2015Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurCarrosserieNA

Bulletin

Incorrect fuel filler door and bowl assembly (SC15/11) Technical background: For 16MY the method of storing the fuel filler cap during refuel has changed. A small number of 16MY Continental GT cars have the incorrect fuel filler bowl assembly fitted. Remedy: Fit the correct fuel filler flap and bowl assembly (part number 3W8809857M). Figure 1 shows the correct 16MY fuel filler flap and bowl assembly Figure 2 shows the incorrect assembly for 16MY Reference workshop manual, Rep. Gr.55 Fuel Filler Flap and Bowl To Remove and Fit

NHTSA · bulletin constructeur10170228Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).