Ce dossier rassemble les défauts connus de la BMW Série 1 (F40), rédigés et sourcés par la communauté. La lecture est libre ; un compte gratuit permet de contribuer. Un défaut reçoit le sceau quand assez de contributeurs reconnus l’ont validé.
Défauts les plus graves
Aucun défaut documenté pour cette sélection.
RappelModéréMoteurEU
L'extrémité avant peut ne pas être correctement boulonnée sur le sous-châssis du moteur. si l'un des boulons n'a pas été correctement serré et se détache, la sécurité du véhicule peut être compromise en cas de collision frontale. dans ce cas, il peut y avoir un risque accru de blessure. de plus, un boulon détaché peut présenter un risque d'accident pour la circulation suivante.
RappelModéréÉlectroniqueUK
For affected vehicles there is a concern involving water ingress and corrosion to the starter motor for where a short circuit cannot be ruled out. It is strongly recommended to park the vehicle outdoors and not in the immediate vicinity of buildings until the repair has been carried out.
RappelCritiqueMoteurEU
L'eau peut pénétrer dans le démarreur et provoquer de la corrosion, ce qui peut entraîner un court-circuit.
BulletinMineurMoteurNA
"CPO (MINI NEXT) Inspection Guidelines: Engines Requiring a TSE PuMA Case. Vehicles with a questionable ""engine oil service"" maintenance history may require further consideration and TSE review prior to continuing with the CPO inspection process."
Wait, that's not right. Here is the actual translation:
Directives d'inspection CPO (MINI NEXT) : moteurs nécessitant un dossier PuMA TSE. Les véhicules dont l'historique d'entretien de la « vidange d'huile moteur » est douteux peuvent nécessiter un examen approfondi et une vérification par TSE avant de poursuivre le processus d'inspection CPO.
BulletinMineurÉlectroniqueNA
A small number of Rolls-Royce Ghost models may not have the correct torque applied to the Lambda sensors, also known as Control or Monitor sensors. To maintain our high levels of quality and customer satisfaction, Rolls-Royce Motor Cars has decided to carry out a torque check to the front and rear Lambda sensors fitted on both engine banks. This procedure must be followed on the chassis numbers listed within ISPA or S-Gate.
BulletinModéréAutreNA
BMW Parts Bulletin TEC6S Screw Return BMW AG has requested the return of the following part number: 18 30 7 639 098 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC6S must appear in the text of your TEC claim. TEC6S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC6S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please refer to the ETK with a VIN and order the correct part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).