Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

BMW M3

1986– · 6 générations · 15 défauts documentés · 2 marchés
Générations

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousNA
F80 M3 · 2014–2018
BulletinCritiqueSuspensionNA

Bulletin

0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.

NHTSA · bulletin constructeur10147112Affiché en anglais d’origine · traduction en attenteVoir le détail →
E90/92/93 M3 · 2007–2013
BulletinCritiqueÉlectroniqueNA

Bulletin

"? NO REGENERATION OF THE DIESEL PARTICULATE FILTER (DPF) This Service Information bulletin supersedes SI B18 03 10 dated November 2010. . The Service Engine Soon lamp is illuminated. The following fault codes may be stored in the DDE: N47T/N57T engine 245700 - Particle filter system: particulate filter highly loaded (Exhaust backpressure high) 245800 - particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) M57Y engine 480A Particle filter system - filter is heavily contaminated. (exhaust backpressure is too high) 481A Particle filter system - filter is heavily contaminated. (exhaust backpressure is above maximum) CAUSE 1. Faults with the exhaust system that affect the monitoring of the DPF by the DDE 2. Unfavorable recent driving profile INFORMATIOM During normal driving, there is a continuous regeneration of the diesel particulate filter that takes place at exhaust-gas temperatures between 280 and 350C (slower oxidation process). The soot particles can only be burned off when the required exhaust-gas temperature has been reached. Under certain driving conditions (i.e., prolonged short trips or an exhaust system which never reaches soot burn-off temperatures), the DPF can become restricted. The DDE will initiate periodic regeneration automatically, at the latest after 600 miles. In vehicles making many short distance journeys, periodic regeneration takes place after only 250-500 miles. The Digital Diesel Electronics control unit evaluates the time for periodic regeneration from the following values: average distance driven average driving speed temperature in the diesel particulate filter values from the exhaust pressure sensor The DDE initiates the regeneration process by decreasing incoming air by the throttle valve, and one or two post injections are executed. This heats the exhaust-gas temperature to approx. 600 C . When the exhaust temp reaches this point: The soot is burned off with the residual oxygen. The

NHTSA · bulletin constructeur10146535Années modèle 2011Affiché en anglais d’origine · traduction en attenteVoir le détail →
M3 (E46) · 2000–2006
BulletinModéréFreinsNA

Bulletin

Brake Disc Return

NHTSA · bulletin constructeur11024229Années modèle 2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

When turning the steering wheel while stationary or when driving on uneven roads; cracking, creaking, or knocking noises may be heard.

NHTSA · bulletin constructeur11021817Années modèle 2024Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

There may be an internal leakage in the brake fluid expansion tank (aka brake fluid reservoir). In the rare case of a leak, the filling level sensor might malfunction over a relatively long period of time.

NHTSA · bulletin constructeur11021109Années modèle 2024Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

Brake groaning noises heard at the rear axle at slow speeds, i.e. close to standstill, stop and go driving;when parking or maneuvering.

NHTSA · bulletin constructeur11018518Années modèle 2024Affiché en anglais d’origine · traduction en attenteVoir le détail →
F80 M3 · 2014–2018
BulletinModéréSuspensionNA

Bulletin

À basses températures extérieures (inférieures à 40 °F) et à faible vitesse (c'est-à-dire lors du stationnement et des manœuvres), avec un grand angle de braquage, le train avant peut présenter un léger désalignement axial. Cela peut se ressentir (à-coups) et s'entendre sous forme de bruit sec (claquement), comme on peut le voir à la marque des 11 secondes de la vidéo. Voir la vidéo jointe V36 01 21.

NHTSA · bulletin constructeur10249018Années modèle 2019Traduit automatiquement · original : anglaisVoir le détail →
E90/92/93 M3 · 2007–2013
BulletinModéréFreinsNA

Bulletin

Bruits fonctionnels (grincement/couinement) au freinage peu avant l'arrêt du véhicule. CAUSE Matériau-

NHTSA · bulletin constructeur10244237Années modèle 2011Traduit automatiquement · original : anglaisVoir le détail →
F80 M3 · 2014–2018
BulletinModéréSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · bulletin constructeur10218384Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · bulletin constructeur10206690Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréAutreNA

Bulletin

The SIM card installed in the telematics control unit (ATM2) connects to different mobile providers' networks. However, due to a missing parameter, this does not work and can cause disruption in BMW ConnectedDrive services in areas with insufficient network coverage.

NHTSA · bulletin constructeur10206692Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · bulletin constructeur10204661Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

When starting the vehicle vehicle at standstill, various yellow Check Control Messages CCMs appear. ID code 00042: Brake system. Additional notes: Avoid abrupt braking as far as possible. Drive at a moderate speed. Have it checked by your nearest Service Center. ID code 2046: Braking force assistance. Additional notes: Braking force assistance failure. Higher pedal force required for vehicle deceleration. Drive at a moderate speed. Have it checked by your nearest Service Center.

NHTSA · bulletin constructeur10204625Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.

NHTSA · bulletin constructeur10201141Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle maynot start when placing the key against the steering column.

NHTSA · bulletin constructeur10200484Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
E90/92/93 M3 · 2007–2013
BulletinModéréFreinsNA

Bulletin

Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.

NHTSA · bulletin constructeur10194296Années modèle 2011Affiché en anglais d’origine · traduction en attenteVoir le détail →
E90/92/93 M3 · 2007–2013
BulletinModéréÉlectroniqueNA

Bulletin

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · bulletin constructeur10193494Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.

NHTSA · bulletin constructeur10186895Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

LANE DEPARTURE WARNING - STEERING INTERVENTION TOO STRONG: The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time. Software error in the KAFAS (camera-based driver assistance system) control unit.

NHTSA · bulletin constructeur10179823Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréÉlectroniqueNA

Bulletin

COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery.

NHTSA · bulletin constructeur10179824Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréSuspensionNA

Bulletin

REMOTE CONTROL IS NOT DETECTED: Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected. Software error in the BDC (Body Domain Controller) module.

NHTSA · bulletin constructeur10179825Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: Ticking noise coming from front wheel while cornering without brakes applied, noticeable at low speeds. The vehicle must be moving.

NHTSA · bulletin constructeur10178996Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréCarrosserieNA

Bulletin

SERVICE ACTION - CHECK SUNROOF SEALING: The sunroof frame may not have been properly sealed, causing a water leak into the vehicle. Improper sealing during production.

NHTSA · bulletin constructeur10179002Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréFreinsNA

Bulletin

PREMATURE WEAR OF THE REAR AXLE BRAKE PADS WITH STANDARD BRAKES: The CBS data and Check Control (CC) message shows the rear axle brake pads are worn, and the vehicle has less than 15,500 miles. Increased residual braking forces in the rear axle brake calipers caused by production-related deviations on the surface of the piston ring seal.

NHTSA · bulletin constructeur10177623Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
G80 M3 · 2020–
BulletinModéréBoîteNA

Bulletin

JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.

NHTSA · bulletin constructeur10176367Années modèle 2020Affiché en anglais d’origine · traduction en attenteVoir le détail →
Plus anciens →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).