Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).
NHTSA · bulletin constructeur10149497Affiché en anglais d’origine · traduction en attenteVoir le détail →
BMW Parts Bulletin TEC7W Rear Silencer with Exhaust Flap Return BMW AG has requested an inspection of the following part numbers: 18 30 8 604 208, 18 30 8 604 209 Stock should not be sold or installed on any vehicle. All Rear Silencer with a manufacturing date before 22.04.14 (DD.MM.YY) need to be returned. Parts with manufacturing date from 22.04.14 are ok to use. (Illustration below) Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7W must appear in the text of your TEC claim. TEC7W is valid from September 26, 2014, through October 10, 2014. The deadline for filing a claim under TEC7W is October 10, 2014. All parts must be returned to your facing RDC no later than October 24, 2014. Please re-order the same part numbers as needed.
NHTSA · bulletin constructeur10148048Affiché en anglais d’origine · traduction en attenteVoir le détail →
Bmw: Oil separator-cold climate conditions. Certain areas of the us experience extremely cold climate conditions during the winter months. A small number of vehicles have experienced problems ranging from leaking or broken valve covers to complete engine failure. Include models e39, 46, 53, 60, 83, and e85. No model years listed. *pe
NHTSA · bulletin constructeur10034667Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
"CPO (MINI NEXT) Inspection Guidelines: Engines Requiring a TSE PuMA Case. Vehicles with a questionable ""engine oil service"" maintenance history may require further consideration and TSE review prior to continuing with the CPO inspection process."
Wait, that's not right. Here is the actual translation:
Directives d'inspection CPO (MINI NEXT) : moteurs nécessitant un dossier PuMA TSE. Les véhicules dont l'historique d'entretien de la « vidange d'huile moteur » est douteux peuvent nécessiter un examen approfondi et une vérification par TSE avant de poursuivre le processus d'inspection CPO.
NHTSA · bulletin constructeur10150045Traduit automatiquement · original : anglaisVoir le détail →
The customer complains of loss of performance and turbocharger noise. CAUSE The turbocharger oil supply may be restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly.
NHTSA · bulletin constructeur10149578Affiché en anglais d’origine · traduction en attenteVoir le détail →
Delivery Stop: 2013 3 Series Emissions Label Update. Vehicle Emissions Control Information (VECI) labels are now available for vehicles affected by the Delivery Stop. Refer to Service Information bulletin B71 01 13 for complete details.
NHTSA · bulletin constructeur10149496Affiché en anglais d’origine · traduction en attenteVoir le détail →
"MMINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replacem
NHTSA · bulletin constructeur10147964Affiché en anglais d’origine · traduction en attenteVoir le détail →
"MINI Original Parts (New and Remanufactured): Limited Warranty Coverage Terms and Conditions. INFORMATION MINI USA, a division of BMW of North America, LLC (""MINI USA"") warrants eligible MINI Original Parts (New and Remanufactured) against defects in materials and workmanship for a period of 24 months without mileage limitation (Submit as a Warranty Claim Type 2 - new or Type 3 - exchange). Parts replaced under the MINI USA Limited Parts Warranty receives the remainder of the original 24 months without mileage limitation coverage, should subsequent failure(s) occur. The labor required to replace a part including diagnosis is also covered when the part's warranty repair is performed by an authorized MINI dealer. Part replacements under a new passenger car limited warranty or program are not eligible for parts warranty coverage. They are only eligible for the remaining portion of the new passenger car limited warranty or program coverage. DETERMINING A PART'S WARRANTY ELIGIBILITY MINI Original Parts A. Replacements under Warranty and Program Coverage, as applicable: * Are warranted for the remainder of the New Passenger Limited Warranty, the Federal, State or MINI Emissions Warranty or Program Coverage period (Submit as a Warranty Claim - Type 1). Prior to delivery: New parts must always be used to repair new vehicles in-stock (not entered into service, no in-service date). Do not use remanufactured parts. After delivery (vehicles in-service): Parts, components or assemblies must be replaced with remanufactured units, when applicable and available through MINI USA. B. Replacements under Field Authorized (FAS) Goodwill: * Receive the remainder of the New Passenger Car Limited Warranty, the Federal, State or MINI Emissions Warranty (Submit as a Warranty Claim - Type 1); or * 24 month parts warranty coverage without mileage limitation with customer's participation toward the cost of the previous goodwill repair (Submit as a Warranty Claim - Type 2 or 3). C. Replaceme
NHTSA · bulletin constructeur10147988Affiché en anglais d’origine · traduction en attenteVoir le détail →
?SI B11 01 15December 2015 EngineTechnical Service This Service Information bulletin supersedes SI B11 01 15 dated October 2015. designates changes to this revision SUBJECT BMW Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.
NHTSA · bulletin constructeur10147859Affiché en anglais d’origine · traduction en attenteVoir le détail →
Update 2: Availability of Fuel Pump 16 14 7 708 047. Due to limited availability, Fuel Pump Assembly 16 14 7 708 047 has been placed on hold pending arrival of additional inventory. At this time, inventory will only be released to dealers with motorcycles down in the workshop for repair. Until further notice, If you have a motorcycle in urgent need of this part please send an e-mail request to motorradaftersales@bmwna.com with the following information: Email Subject: 7708047 Request Dealer XXXXX
NHTSA · bulletin constructeur10147893Affiché en anglais d’origine · traduction en attenteVoir le détail →
Due to previous programming errors, affected vehicles had the CBS oil service conversion performed as part of the N63 CCP campaign (SI B11 16 14), but the desired interval change to 12 months/15,000 km/10,000 miles was not completed correctly.
NHTSA · bulletin constructeur10147865Affiché en anglais d’origine · traduction en attenteVoir le détail →
MINI Engine Oil Part Number Transition and Model Year 2016 Engine Oils. INFORMATION Part numbers of the recommended engine oils have changed. Use the quick reference chart in Section 1 to help identify which new engine oil part numbers should be used when the old part number stock is depleted. Use the quick reference chart in Section 2 to help identify which new engine oil viscosities and part numbers should be used in Model Year 2016 and newer vehicles.
NHTSA · bulletin constructeur10147905Affiché en anglais d’origine · traduction en attenteVoir le détail →
BMW Motorrad is issuing this notification to the effect that the telescopic fork oil used to date, which has an SAE viscosity class of 7.5, has been changed to an oil with SAE viscosity class 11.5.
NHTSA · bulletin constructeur10147846Affiché en anglais d’origine · traduction en attenteVoir le détail →
Engine Replacement: Filling Engine with Engine Oil Before First Start. If the new or remanufactured replacement engine is started to determine electronically if the engine is filled with the appropriate amount of engine oil, damage to the replacement engine can occur immediately. The engine may have some residual engine oil from assembly, but this is not enough engine oil to properly lubricate the engine to measure the engine oil level electronically when it is started for the first time. Further, the electronic engine oil measurement is only operational when the engine is running at its full operating temperature. Checking the engine oil without the engine running at operating temperature will lead to an incorrect or incomplete measurement.
NHTSA · bulletin constructeur10147126Affiché en anglais d’origine · traduction en attenteVoir le détail →
Bmw: Loss of performance and turbocharger noise due to the oil supply restricted, causing oil starvation and resulting in the seizing of the turbocharger assembly. *rm updated 7/09/13. *pe updated 9/25/15. *pe
NHTSA · bulletin constructeur10040845Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
Bmw: The vent hole of the cooling hose coupling on the drivers side of the radiator may be blocked. There is a procedure for checking and fixing the problem. *rm
NHTSA · bulletin constructeur10037255Années modèle 2010Affiché en anglais d’origine · traduction en attenteVoir le détail →
Reprogram dme for low oil level indicator. Start of production up to 11/22/2002. *tt
NHTSA · bulletin constructeur10001003Affiché en anglais d’origine · traduction en attenteVoir le détail →
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).