Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

BMW E89 (E89)

2009–2016 · 9 défauts documentés · 3 marchés

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousEUNAUK
BulletinCritiqueSuspensionNA

Bulletin

0Replacement of Steering Gear Due to Accident Damage. INFORMATION The steering gear does NOT have to be replaced if: ? There is no visible damage to front axle parts such as spring struts, hubs or spindles, control arms or wishbones, thrust or tension rods or stabilizers performing a locating function, steering drop arms or Pitman arms, track rods or drag links, tie rods, front axle subframe, steering column, and attachment points for suspension components to body. ? There is no binding or increase in turning effort when operating the steering gear from lock to lock with engine off. ? The impact has not caused the wheel alignment to become not adjustable within specified tolerances using normal adjustment procedures. The steering gear MUST be replaced if: ? There is visible damage to the steering gear, including blackening or discoloration of the housing from fire damage. ? Electric steering gear (EPS) version: Examine the control unit with all plug connections for damage and hairline cracks. ? There is any permanent deformation or cracks on: ? Wheel rims in the event of a negative result from the wheel/axle alignment check ? Spring struts, steering stubs, wheel carriers ? Wishbones ? Struts, trailing links or the anti-roll bar with this function ? Body side screwing/attachment points for wheel guide control components ? Front axle support ? Pitman arms https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/21101.1.M320405....3/2/2015 Page 2 of 2 ? Tie rods ? Steering box fixtures ? Steering column The steering column MUST be replaced if visibly damaged, deformed or broken. If a recommended replacement with the criteria described above is refused by the customer or insurance company, this should be noted in the repair order and signed by the refusing party.

NHTSA · bulletin constructeur10147112Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.

NHTSA · bulletin constructeur10218384Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

A manufacturing defect inside the electric fuel delivery unit (in-tank fuel pump) pressure-limiting valve will result in a noise while driving. This defect will not lead to fuel pump failure or loss of power.

NHTSA · bulletin constructeur10193493Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

Butt connector for repairing a plug connection. The ?top up coolant? message is displayed in the central display (CC message ID 166). When checking the cooling system there are no leaks found and the expansion tank is filled to the proper level.

NHTSA · bulletin constructeur10193494Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréFreinsNA

Bulletin

Visual Inspection of Brake discs/Rotors for new car deliveries

NHTSA · bulletin constructeur10215023Années modèle 2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW Parts Bulletin TEC6S Screw Return BMW AG has requested the return of the following part number: 18 30 7 639 098 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC6S must appear in the text of your TEC claim. TEC6S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC6S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please refer to the ETK with a VIN and order the correct part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10150082Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW AG has requested a return of the following part number: 36 10 6 856 227 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC2T must appear in the text of your TEC claim

NHTSA · bulletin constructeur10150081Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW Parts Bulletin TEC7S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 147 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC7S must appear in the text of your TEC claim. TEC7S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC7S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10150083Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

BMW Parts Bulletin TEC1T RDC Module Return BMW NA has requested the inspection of the following part numbers: 36 10 6 856 227 and 36 10 6 798 872 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC1T must appear in the text of your TEC claim. TEC1T is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC1T is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Part number 36 10 6 856 227: All parts with an index of 02 and older must be returned. All parts with an index of 03 are correct. Part number 36 10 6 798 872: All parts with an index of 03 and older must be returned. All parts with an index of 04 are correct. The Index is the two digit code under the bar code located on the box label. The Index can also be found on the part itself just after the part number. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10150084Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

At MlNl,we are committed to maintaining a level of automotive and service excellence that exceeds your expectation now and in the future. Consistent with this philosophy, we want to help you avoid problems and minimize your in convenience. This letter addresses an issue involving the power-assist steering pump and associated pump cooling fan on certain model year 2002-2005 Mini Cooper and Mini Cooper S Models. We are extending the warranty coverage for the power assist steering pump and associated cooling fan on yoiur vehicle to 13 years / 150000 miles, whichever comes first.

NHTSA · bulletin constructeur10150085Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW Parts Bulletin TEC8S Floor Mat Return BMW AG has requested the return of the following part number: 51 47 2 166 151 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC8S must appear in the text of your TEC claim. TEC8S is valid from May 30, 2013, through June 13, 2013.The deadline for filing a claim under TEC8S is June 13, 2013. All parts must be returned to your facing RDC no later than June 27, 2013. Please re-order the same part number as needed. (c) 2013, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10150079Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW AG has requested a return of the following part number: 36 11 1 509 164 Stock should not be sold or installed on any vehicle. Please return the part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC9S must appear in the text of your TEC claim.

NHTSA · bulletin constructeur10150080Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

High-pressure Direct Injection Fuel System Repairs. INFORMATION Failure to follow the repair procedures, including the use of the special tools and correct torque specifications during the removal, installation and/or replacement of the high-pressure fuel system components, can result in damage to the high-pressure fuel lines, high-pressure fuel injectors, high-pressure pump and the cylinder head. The use of aftermarket slide hammers and pry bar-type tools is not allowed when removing and installing or replacing these components. Using tools that abruptly shock the injector housing to remove the injector from the cylinder head can lead to failures of the cylinder head and/or the injector itself. The use of power or pneumatic tools is not allowed when removing and installing or replacing these components. Always refer to the proper ISTA/D repair instruction for the approved tools and procedures applicable to the vehicle in the work shop.

NHTSA · bulletin constructeur10149588Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréHabitacleNA

Bulletin

BMW Parts Bulletin TEC142 Airbag Return BMW AG has requested the return of the following part numbers: 72 12 9 394 543 (E46 Passenger Air Bag Interim) 72 12 9 394 542, 72 12 7 112 351, 72 12 7 112 351, 72 12 9 384 807, 72 12 9 330 942, 72 12 7 065 920 Stock should not be sold or installed on any vehicle. Recall SIBs (B65 15 13, B65 17 14) are currently being updated. Please reorder the new final remedy part number 72 12 6 998 949 immediately so there is no lack of availability for E46 Passenger air bag repairs. If you plan on ordering more than 20 pcs a month, please order 45 pcs on one line (1 pallet of 45). For accident vehicles not affected by an open recall, please refer to EPC with VIN for replacement part number. Concerned are all parts delivered and shipped so far. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC142 must appear in the text of your TEC claim. TEC142 is valid from October 31, 2018, through November 14, 2018. The deadline for filing a claim under TEC142 is November 14, 2018. All parts must be returned to your facing RDC no later than November 28, 2018. When submitting a return claim, please specify in the comment section if the part is in its original factory seal or if it was previously opened. (c) 2018, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10149563Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréHabitacleNA

Bulletin

BMW Parts Bulletin TEC141 Seat Pad Return BMW AG has requested the return of the following part numbers: 52 10 7 478 172, 52 10 7 478 175, 52 10 7 478 176 52 10 7 478 177, 52 10 7 478 178, 52 10 7 478 180 Stock should not be sold or installed on any vehicle. Concerned are all parts delivered and shipped so far.

NHTSA · bulletin constructeur10149562Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

CLOSED-CIRCUIT CURRENT MONITORING. Increased closed-circuit currents may occur permanently or intermittently and cause the battery to discharge prematurely. The increase in closed-circuit current may be caused by a faulty control module or by the installation of a non-approved accessory. In a situation where a vehicle has broken down due to a discharged battery, for diagnostic purposes it is important not to disconnect the battery. This is because a control module will be reset if the battery is disconnected. Following a reset, the faulty control module may start functioning correctly again, making accurate diagnosis impossible. To correctly measure closed-circuit current, the 50-amp or 100-amp clip-on probe can be used in conjunction with the IMIB (Integrated Measurement Interface Box) to properly diagnose closed-circuit current problems over an extended period of time.

NHTSA · bulletin constructeur10149555Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréMoteurNA

Bulletin

Delivery Stop: 2013 3 Series Emissions Label. A Delivery Stop has been issued by BMW AG to correct the Vehicle Emissions Control Information (VECI) label. Affected are certain 2013 Model Year 3 Series vehicles with xDrive. Vehicles included in the attached chassis number list must not be delivered until the correct VECI label has been installed. Service and parts instructions will be provided as soon as the labels are available for ordering (estimate: 1 week).

NHTSA · bulletin constructeur10149497Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

2013 MINI JCW Paddle Shifter Retrofit. SZL to EGS harness installation. For necessary preliminary tasks, refer to ISTA and perform the following steps listed in this document.

NHTSA · bulletin constructeur10149498Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

"N54 - Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."

NHTSA · bulletin constructeur10149429Années modèle 2009Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

N63: Proper Ignition Harness Installation and Ground Connections. INFORMATION https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16511.1.B12241... 10/14/2014 Page 2 of 2 Any consecutive damage to the BSD interface components (DME, alternator voltage regulator, QLT sensor) caused by incorrect reinstallation of the ignition harness is not covered under the BMW New Vehicle /SAV Limited Warranty.

NHTSA · bulletin constructeur10148021Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

Battery Maintenance Requirements: Battery Care. Proper battery maintenance is vital when BMW vehicles are in your center's inventory. Allowing a vehicle's battery voltage to drop below 12.0 volts (12.0V) permanently reduces the battery life expectancy and can lead to premature failure of the battery. For vehicles, equipped with a high-voltage battery (hybrid/electric vehicles), failure to properly maintain this battery may lead to a greatly discharged HV battery, requiring replacement. We provide a flexible battery maintenance system every BMW center can use in accordance with their particular needs. This bulletin explains the Battery Charging Calendar (see attachment), charging systems and a simplified tool and battery voltage checking procedure below.

NHTSA · bulletin constructeur10148035Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

BMW Parts Bulletin TEC9V Fuel Tank / Level Sensor Returns BMW AG has requested an inspection of the following part numbers: 16 11 7 268 031, 16 11 7 268 032 and 16 11 7 297 340 Stock should not be sold or installed on any vehicle. 16 11 7 268 031 and 16 11 7 268 032 All fuel tanks produced before 05/30/2014 needs to be returned. All parts with later dates of production are ok and can be used. 16 11 7 297 340 All level sensors produced in Poland before 05/19/2014 (date is shown as day 139 of year 14 on the part) need to be returned. Those produced after this date are ok and can be used. All level sensors produced in Brazil currently in dealer inventory need to be returned. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC9V must appear in the text of your TEC claim. TEC9V is valid from September 24, 2014, through October 08, 2014. The deadline for filing a claim under TEC9V is October 08, 2014. All parts must be returned to your facing RDC no later than October 22, 2014. Please re-order the same part numbers as needed. (c) 2014, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution. Page 2 / 2 Made in Poland Made in Brazil Need to be returned (c) 2014, BMW of North America, LLC. The contents of this document are confidential and should not be shared with third parties for distribution.

NHTSA · bulletin constructeur10148044Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréÉlectroniqueNA

Bulletin

BMW Parts Bulletin TEC3W Leak Diagnosis Module Return BMW AG has requested a return of the following part numbers: 16 13 7 315 813 and 16 13 7 274 147 Stock should not be sold or installed on any vehicle. Leak Diagnosis Module part number 16 13 7 315 813 must be returned. Please reorder new part number 16 13 7 333 302 as needed. Pressure Switch, Leak Diagnosis Module part number 16 13 7 274 147 must also be returned. Please reorder new part number 16 13 7 333 301 as needed. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC3W must appear in the text of your TEC claim. TEC3W is valid from September 04, 2014, through September 18, 2014. The deadline for filing a claim under TEC3W is September 18, 2014. All parts must be returned to your facing RDC no later than October 02, 2014.

NHTSA · bulletin constructeur10148045Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréAutreNA

Bulletin

BMW Parts Bulletin TEC5W Swivel Joint Returns BMW AG has requested an inspection of the following part numbers: 32 30 6 859 833 Stock should not be sold or installed on any vehicle. All affected parts should be sorted by the basis of instructions illustrated below. Please return all part(s) to your facing Regional Distribution Center (RDC). Submit for return using a YR26 damage claim with order reason BM2. A valid BMW delivery and delivery item number must be entered, and TEC5W must appear in the text of your TEC claim. TEC5W is valid from September 24, 2014, through October 08, 2014. The deadline for filing a claim under TEC5W is October 08, 2014. All parts must be returned to your facing RDC no later than October 22, 2014. Please re-order the same part numbers as needed.

NHTSA · bulletin constructeur10148046Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréSuspensionNA

Bulletin

Remote Control and/or Comfort Access Functionality Is Inoperative. The radio remote control and Comfort Access functionality is inoperative: * The vehicle can only be unlocked or locked with the mechanical key. * The vehicle can only be started with the remote control key in the slot of the Car Access System (CAS) or when held very closely to the steering column. The replaceable battery in the remote control key is either damaged or depleted.

NHTSA · bulletin constructeur10148041Affiché en anglais d’origine · traduction en attenteVoir le détail →
Plus anciens →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).