Rupture possible du gonfleur d'airbag
Le coussin gonflable passager risque de ne pas se déployer correctement.
🔔 Créez un compte gratuit pour recevoir les alertes e-mail sur Honda Stream (toutes les générations)
Le coussin gonflable passager risque de ne pas se déployer correctement.
助手席側のエアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレ-タ内圧が異常上昇して、インフレータ容器が破損するおそれがある。
交換修理用の運転者席側SRSエアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレ-タ内圧が異常上昇して、インフレータ容器が破損するおそれがある。
助手席側エアバッグのインフレータ(膨張装置)において、環境温度および湿度変化の繰り返しによりガス発生剤が劣化することがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇して、インフレータ容器が破損するおそれがある。
特定の運転者席側SRSエアバッグのインフレータ(膨張装置)において、原因は判明していないが、エアバッグ展開時にインフレータ容器が破損するおそれがあることから、全車両、予防的措置として、当該インフレータを交換する。
助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止装置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が飛散して飛び散り、出火したり負傷するおそれがある。
特定タイプの運転者席側SRSエアバッグのインフレータ(膨張装置)において、市場回収品を調査した結果、ガス発生剤の密度にばらつきが大きいものを確認した。このため、原因は判明していないが、エアバッグ展開時に正常に展開しないおそれがあることから、予防的措置として当該インフレータを新品に交換する。
Une pression de déploiement anormale peut entraîner la rupture du boîtier du gonfleur. En cas de rupture du gonfleur, des fragments métalliques pourraient être projetés vers le haut, en direction du pare-brise, ou vers le bas, en direction de l'espace pour les pieds du passager avant, pouvant ainsi blesser un occupant du véhicule.
Le gonfleur de l'airbag passager peut produire une pression interne excessive lors du déploiement. Cette pression accrue peut provoquer la rupture du gonfleur, projetant des fragments métalliques et blessant les occupants du véhicule.
助手席エアバッグインフレータ(膨張装置)において、市場から回収したものから、異常展開に繋がるおそれがあるガス発生剤の密度低下が認められた。このため、原因は判明していないが、一定の期間までに製造した同タイプのインフレータについて、予防的措置として当該インフレータを新品に交換する。
運転者席側SRSエアバッグのインフレータ(膨張装置)において、市場から回収したものから、異常展開に繋がるおそれがあるインフレータ容器内圧の異常出力が認められた。このため、原因は判明していないが、一定の期間までに製造した同タイプのインフレータについて、予防的措置として当該インフレータを新品に交換する。
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.
null The passenger airbag inflator may produce excessive internal pressure if deployed. The increased pressure may cause the inflator to rupture propelling metal fragments causing injury to the occupant.
助手席側エアバッグのインフレータ(膨張装置)において、他社製の車両解体作業時にインフレータ容器の破損が発生した。このため、原因は判明していないが、同年式で同タイプのインフレータはエアバッグ展開時にインフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがあることから、全車両、予防的措置として、当該インフレータを良品と交換する。
助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止装置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火したり乗員が負傷するおそれがある。
null The passenger’s front airbag inflator could produce excessive internal pressure if it deploys, causing the inflator to rupture. In this case, metal fragments could be propelled upwards toward the windscreen or downward towards the front passenger’s foot-well, potentially causing injury to the passenger.
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire.
助手席用エアバッグのインフレータ(膨張装置)において、ガス発生剤の成型工程が不適切又は成型後の吸湿防止措置が不適切なため、密度が不足したガス発生剤が組み込まれたものがある。そのため、エアバッグ展開時にインフレータ内圧が異常上昇し、インフレータ容器が破損して飛び散り、出火するおそれがある。
手動運転補助装置(ホンダテックマチック)装着車両において、ブレーキリンク機構の軸受け部の構造が不適切なため、軸受け部に過度な応力がかかるものがある。そのため、そのまま使用を続けると、軸受け部の締結ボルトに亀裂が生じ、最悪の場合、ボルトが折損してブレーキが効かなくなるおそれがある。
The combustion rate of the airbag propellant may be too fast causing excessive internal pressure in the inflator during airbag deployment. In an extreme case the inflator casing may rupture leading to a scattering of metal fragments.
The product poses a risk of injuries because some airbag inflators may have been assembled with insufficient propellant components which, over a period of time, can result in the propellant being broken into small pieces, thus increasing its surface area. During airbag deployment, this increased surface area of propellant can cause an excessive inflator pressure. If the inflator pressure is too high the inflator case may rupture and metal fragments can pass through the airbag cushion material.
助手席用エアバッグのインフレータ(膨張装置)内のガス発生剤組付け作業が不適切なため、ガス発生剤の装填量が不足しているものがある。そのため、車両の振動でガス発生剤が粉状となり、エアバッグが展開するとインフレータ内圧の異常な上昇で容器が破損して構成部品が飛散し、乗員が負傷するおそれがある。
ブレーキペダルを手動で操作するための運転補助装置装着車両において、操作力を伝達するブレーキリンクプレートとシャフトの溶接強度に不十分なものがあるため、車両が停止した状態で、ブレーキアームをさらに押し込むと当該溶接部に過大な力がかかり亀裂が生じる場合がある。そのため、そのまま使用を続けると溶接部の亀裂が進行し、最悪の場合、破断してブレーキが効かなくなるおそれがある。
油圧式パワーステアリングのギアボックスにタイロッドを取り付けるブラケットのボル ト締め付け力が不足しているため、車庫入れ等の極低速時に据え切り操作を行うと当該ボ ルトが弛み、そのまま使用を続けるとボルトが折損し、ギアボックスからブラケットが外 れるものがある。そのため、ハンドル操作ができなくなるおそれがある。
四輪車の走行装置の車輪取り付けホイールボルトにおいて、当該ボルトの熱処理に不適切 なものがあるため、そのままの状態で使用を続けると、当該ボルトが折損し、最悪の場合 、車輪が脱落するおそれがある。
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).