Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Hyundai Trajet

1999–2008 · 0 défauts documentés · 4 marchés

Ce dossier rassemble les défauts connus de la Hyundai Trajet, rédigés et sourcés par la communauté. La lecture est libre ; un compte gratuit permet de contribuer. Un défaut reçoit le sceau quand assez de contributeurs reconnus l’ont validé.

Défauts les plus graves

Aucun défaut documenté pour cette sélection.

Derniers rappels officiels

Tout voir (5) →
RappelModéréSuspensionEU

Motorrijtuigen en aanhangwagens - ophanging

De draagarmen achter zijn onvoldoende beschermd tegen corrosie. De mogelijkheid bestaat dat deze doorroesten en als gevolg daarvan vervormen, scheuren en/of breken.

rdw2 mai 2013MGP100171Années modèle 2000–2007Affiché en néerlandais d’origine · traduction en attenteVoir le détail →
RappelModéréSuspensionUK

Suspension may fail

Trajet and Sante Fe - Corrosion may build up and weaken the rear suspension arms to an extent where they could fail and the directional control of the vehicle could be affected. Sante Fe models additionally have a similar concern with the front sub-frame.

DVSA · Royaume-Uni20 sept. 2010R/2010/091Années modèle 2000–2004Affiché en anglais d’origine · traduction en attenteVoir le détail →

Derniers bulletins techniques

Tout voir (24) →
BulletinMineurÉlectroniqueNA

Bulletin

This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.

NHTSA · bulletin constructeur11025476Années modèle 2001Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurCarrosserieNA

Bulletin

This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.

NHTSA · bulletin constructeur10251285Années modèle 2001Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.

NHTSA · bulletin constructeur10247189Années modèle 2001Affiché en anglais d’origine · traduction en attenteVoir le détail →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0).