Bulletin
D/C Cut Fuse Installation During PDS
🔔 Créez un compte gratuit pour recevoir les alertes e-mail sur Lexus GS (toutes les générations)
Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.
D/C Cut Fuse Installation During PDS
LSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse (30A) has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse (30A) into its original location and clear all related Diagnostic Trouble Codes (DTCs) during Pre-Delivery Service (PDS).
TSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse (30A) has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse (30A) into its original location and clear ALL related Diagnostic Trouble Codes (DTCs) during Pre-Delivery Service (PDS).
To minimize battery discharge during transportation and storage, the DCC fuse (20A) has been removed at the assembly plant, and temporarily stored in the blank space of the fuse block in the engine compartment. During Pre-Delivery Service (PDS), reinstall the DCC fuse into its original location.
TSB: To minimize battery discharge during transportation and storage, the D/C Cut Fuse (30A) has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the D/C Cut Fuse (30A) into its original location and clear ALL related Diagnostic Trouble Codes (DTCs) during Pre-Delivery Service (PDS).
TSB: To minimize battery discharge during transportation and storage, the DCC fuse (30A) has been removed at the assembly plant, and temporarily stored in the blank space of the fuse block in the engine compartment. During Pre-Delivery Service (PDS), reinstall the DCC fuse into its original location.
"lsb: To minimize battery discharge during transportation and storage, the d/c cut fuse (30a) has been removed at the assembly plant and temporarily stored in the engine compartment relay block. Reinstall the d/c cut fuse (30a) into its original location and clear all related diagnostic trouble codes (dtcs) during pre-delivery service (pds)."
D/c cut fuse installaton during pds to minimize battery discharge during transportation and storage, the d/c cut fuse (30a) has been removed at the assembly plant and temporarily stored in the engine compartment relay blcok. Reinstall the d/c cut fuse (30a) into its original location and clear all related diagnostic trouble codes (dtcs) during pre-delivery service (pds).
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker
TSB: REVISION NOTICE November 14, 2019 Rev1: ? The Deletion of Vehicle Alert History section has been added after D/C Cut Fuse Installation. Any previous printed versions of this bulletin should be discarded. This bulletin contains the vehicle specific pre-delivery services for 2020 model year ES300h and ES350 vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
TSB: REVISION NOTICE July 12, 2019 Rev2: ? Applicability has been updated to include 2020 model year RX350 and RX450h vehicles. March 29, 2019 Rev1: ? Applicability has been updated to include 2020 model year RC F vehicles. ? The Software Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2020 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
TSB: 2020 model year Lexus vehicles are equipped with factory-installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: 2018 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: REVISION NOTICE September 14, 2018 Rev1: ? Applicability has been updated to include 2019 model year LS500, LS500h, LC500 and LC500h vehicles. ? The Software Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2019 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software has been installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine whether or not the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
TSB: REVISION NOTICE June 20, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. 2018 ? 2019 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: 2017 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
LSB: 2016 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
TSB: To minimize battery discharge during transportation and storage, the short pin has been removed at the assembly plant and temporarily stored in the engine compartment Relay Block. Reinstall the short pin into its original location and confirm all related Diagnostic Trouble Codes (DTCs) are cleared during Pre-Delivery Service (PDS).
Tsb: 2017 model year lexus vehicles are equipped with factory installed xm satellite radio, including a 90-day free customer trial. As part of the pre-delivery service (pds) process, ensure that the xm satellite radio is activated and ready for use.
Lsb: 2016 model year lexus vehicles are equipped with factory installed xm satellite radio, including a 90-day free customer trial. As part of the pre-delivery service (pds) process, ensure that the xm satellite radio is activated and ready for use.
Lexus: Precaution information on removal, inspection, installation of accelerator pedal sensor assembly, which requires no lubrication. Models 2001-13 ct200h, es300, 300h, 330, 350, gs300, 350, 450, 450h, 460, gx460, 470, hs250h, is f, is250, 250c, 350, 350c, lfa, ls430, 460, 600h, lx470, 570, rx330, 350, 400h, 450h, sc430. *pe
Vehicle will not start due to low battery.
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).