Ce dossier rassemble les défauts connus de la Mazda 2 III, rédigés et sourcés par la communauté. La lecture est libre ; un compte gratuit permet de contribuer. Un défaut reçoit le sceau quand assez de contributeurs reconnus l’ont validé.
Bij 5,3% van de APK-keuringen van deze auto in Nederland werd dit gebrek vastgesteld (704 van 13.321 keuringen in de afgelopen 12 maanden): 84,4 keer zo vaak als bij auto's van dezelfde leeftijd.
✓ Analyse Mecafile de données officielles2014–Affiché en néerlandais d’origine · traduction en attenteVoir le détail →
5.1% of periodic inspections of this car in Norway found a fault here that had to be repaired (37 cars in 720 inspections in 2025): 5.8 times as often as cars of the same age.
✓ Analyse Mecafile de données officielles2014–Affiché en anglais d’origine · traduction en attenteVoir le détail →
On affected vehicles improper programming of the combination meter display may cause the display to become inoperable and remain blank. This prevents the speedometer from being visible.
DVSA · Royaume-Uni1 oct. 2025R/2025/316Années modèle 2023–2025Affiché en anglais d’origine · traduction en attenteVoir le détail →
L’écrou et la vis inférieure de fixation de l’amortisseur à la mâchoire de direction pourraient devenir lâches, conduisant à son détachement. cela pourrait entraîner une perte de contrôle sur le véhicule ou une altération de la stabilité au volant, ce qui pourrait augmenter le risque d’accident.
Some customers may complain about any of the following 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.
NHTSA · bulletin constructeur11039110Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
Some vehicles may exhibit the check engine light ON with DTC P0300:00 (Random misfire detected) stored. This may be caused by a mis-detection of a misfire due to improper PCM control logic. To eliminate this concern, the PCM control logic has been modified.
NHTSA · bulletin constructeur11012337Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
Some customers may notice the charging lamp turns on while driving. Upon inspection, DTC P2502:00 PCM (Malfunction in voltage generated by generator) is stored in memory. This may be caused by resistance between the circuit board and ground. When high intensity electrical current passes through, the ground terminal position may not be sufficient enough. To eliminate this concern, the DC-DC converter control software has been modified. Additionally, the production procedure has been revised. The tightening torque for the ground terminal and circuit board was increased.
NHTSA · bulletin constructeur11008418Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0).