Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Mazda CX-3

2014– · 1 générations · 13 défauts documentés · 3 marchés
Générations
Toutes les générationsCX-32014–1330207

Les bulletins techniques (TSB) sont des instructions de réparation que les constructeurs envoient à leurs concessionnaires sur des problèmes connus. Ce ne sont pas des rappels de sécurité, mais ils confirment souvent un défaut.

Année modèle
MarchéTousNA
BulletinModéréMoteurNA

Bulletin

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it.

NHTSA · bulletin constructeur10092724Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinModéréMoteurNA

Bulletin

If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.Metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold. When the new engine assembly is installed, debris in the intake manifold will be ingested into the new engine and cause internal damage.Clean the intake manifold internally to remove any debris from old engine before installing the new replacement engine assembly.If the intake manifold cannot be properly cleaned internally, replace it

NHTSA · bulletin constructeur10085289Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bulletin constructeur11020037Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bulletin constructeur10254186Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bulletin constructeur10235702Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Engine Oil seepage from engine oil pressure switch

NHTSA · bulletin constructeur10213378Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

A tapping/rattling noise may be noticed from the valve train area. This operating condition can occur on new vehicles which have been delivered to Mazda dealers (due to loading and unloading from transport trucks or customers moving their vehicles in and out of their garages to wash the vehicle, etc.). This condition may also occur if the engine is not allowed to warm up after multiple cold starts.

NHTSA · bulletin constructeur10210884Années modèle 2021Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Some customer using Flexible setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · bulletin constructeur10159194Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Some customer using "Flexible" setting for Oil Change in the maintenance monitor may notice that the oil change due notification will not work due to improper control logic of the PCM. The PCM clears the TRAVELED DISTANCE at the wrong time while the ELAPSED DAYS and the DETERIORATION DETERMINATION work as designed. To correct this issue, the control logic of the PCM has been changed.

NHTSA · bulletin constructeur10154448Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Some customers may complain about the Panic Alarm system activating while driving with the following results: The alarm stops when cycling the ignition OFF and then back ON. No DTCs are stored. Contact Hotline for the latest repair information.

NHTSA · bulletin constructeur10145256Années modèle 2019Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures.

NHTSA · bulletin constructeur10105644Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Frequent engine starts under extremely cold ambient temperatures may result in oil seepage from the engine oil pressure switch. This concern may be caused by a lack of durability of the oil pressure switch under these conditions. To correct the problem, the oil pressure switch has been improved to increase the durability in cold ambient temperatures. All skyactiv engines equipped with oil pressure switch part number pe01-18-501a are applicable to this issue.

NHTSA · bulletin constructeur10099420Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Some vehicles may exhibit oil seepage from the rear shock absorber(s) while the vehicle is on a hoist (i.E. During normal maintenance or other service). Check the label on both rear shock absorbers for the lot number (example: Ra5 is the lot number shown in the illustration below). If the lot numbers are within the production range shown in the table below, replace the rear shock absorbers with new ones.

NHTSA · bulletin constructeur10092561Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

The 2016 cx-9 with the skyactiv-g 2.5t engine requires a unique oil filter (py8w-14-302) which is not interchangeable with other skyactiv oil filters. The unique oil filter can be identified with two white bands as shown below.

NHTSA · bulletin constructeur10092237Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurMoteurNA

Bulletin

Mazda connect shuts down and does not reboot. Some vehicles may experience mazda connect infotainment system shutting down with a few minutes after ignition is turned on, and will not reboot. It will only reboot after ignition is turned off and then turned on again. This is caused by an internal malfunction of the connectivity master unit (cmu) hardware.

NHTSA · bulletin constructeur10076688Années modèle 2016Affiché en anglais d’origine · traduction en attenteVoir le détail →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).