Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Mercedes-BenzMercedes-Benz Classe CLK

1997–2008 · 2 générations · 34 défauts documentés · 2 marchés
Générations

Tout sur la Mercedes-Benz Classe CLK, toutes générations confondues : défauts, rappels, notes techniques et discussions. Choisissez une génération pour affiner.

Défauts les plus graves

Tout voir (34) →
m
CritiqueÉlectroniqueNAClasse CLK C208 · 1997–2002

Electrical system: problems reported by owners

39 owners in the United States reported problems with the electrical system of this car to NHTSA (model years 1998–2002), typically at around 61,000 miles. Most often named: instrument cluster/panel (44%). Reported consequences: 4 fires, 1 injury.

✓ Analyse Mecafile de données officielles1998–2002Affiché en anglais d’origine · traduction en attenteVoir le détail →
m

Transmission and drivetrain: problems reported by owners

18 owners in the United States reported problems with the transmission and drivetrain of this car to NHTSA (model years 1999–2002), typically at around 70,000 miles. Most often named: automatic transmission (39%), automatic transmission:control module (tcm/pcm/tecm) (17%), automatic transmission:gear position indication (prndl) (17%). Reported consequences: 2 crashes, 1 fire.

✓ Analyse Mecafile de données officielles1999–2002Affiché en anglais d’origine · traduction en attenteVoir le détail →
m

Airbags: problems reported by owners

10 owners in the United States reported problems with the airbags of this car to NHTSA (model years 1999–2002), typically at around 81,000 miles. Most often named: side/window (20%). Reported consequences: 7 crashes, 7 injuries.

✓ Analyse Mecafile de données officielles1999–2002Affiché en anglais d’origine · traduction en attenteVoir le détail →

Derniers rappels officiels

Tout voir (36) →
Classe CLK C209 · 2001–2008
RappelModéréCarrosserieNA

Visibility:Sun/moon roof assembly

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.

NHTSA · États-Unis19 nov. 202424V874000Années modèle 2003–2009Affiché en anglais d’origine · traduction en attenteVoir le détail →
Classe CLK C208 · 1997–2002Classe CLK C209 · 2001–2008
RappelModéréCarrosserieJP

車体

スライディングルーフのガラスパネルにおいて、製造管理が不適切なため、接着強度が不十分なものがある。そのため、ガラスパネルに浮きが発生し、最悪の場合、走行風により脱落して、後続車両の妨げになるおそれがある。

MLIT · Japon22 juin 20231236290Années modèle 2000–2009Affiché en japonais d’origine · traduction en attenteVoir le détail →
Classe CLK C208 · 1997–2002Classe CLK C209 · 2001–2008

Derniers bulletins techniques

Tout voir (94) →
Classe CLK C209 · 2001–2008
BulletinMineurCarrosserieNA

Bulletin

Plainte : Bruit de cliquetis provenant de la zone des haut-parleurs dans les portes. Cause : En cours d'analyse. Solution : Pour identifier la cause, retirez d'abord la garniture de porte. Si le bruit persiste même avec la garniture de porte retirée, poursuivez le diagnostic en vous concentrant sur le haut-parleur et, si nécessaire, créez un dossier TIPS avec une vidéo explicative en pièce jointe. Remarque : veuillez mentionner ce document dans la demande de garantie et, une fois le diagnostic terminé, sélectionnez le code de dommage correspondant à la pièce défectueuse à l'origine du problème. Si le bruit cesse lorsque la garniture de porte est retirée, veuillez procéder conformément à LI72.10P067691. Information : Dans ce cas, n'utilisez pas de code de dommage pour les haut-parleurs dans la demande de garantie !

NHTSA · bulletin constructeur11038217Années modèle 2007–2008Traduit automatiquement · original : anglaisVoir le détail →
Classe CLK C209 · 2001–2008
BulletinModéréFreinsNA

Bulletin

**Plainte** Nouvelle visite à l'atelier pour une vibration du véhicule au freinage à partir de 60 MPH. **REMARQUE :** Bien que le symptôme ressemble à une vibration due à un pneu ou à une roue, il est généralement facile de constater qu'il s'agit d'un phénomène distinct, selon qu'il se produit en permanence ou uniquement au freinage. **Cause** Bien que la cause de la vibration soit très probablement un voile latéral excessif du disque ou du moyeu/roulement de roue, l'ensemble du système doit être vérifié afin de détecter d'autres causes possibles. 1. Dommages antérieurs dus à une collision. 2. Durée d'immobilisation excessive du véhicule sans rotation des composants. 3. Voile latéral du roulement de roue/moyeu. 4. La surface d'appui de la roue a été trop serrée (la procédure de couple WIS n'a pas été respectée). 5. Les surfaces d'appui ont été excessivement modifiées (peintes, rayées, pliées, etc.). **Solution** Lire attentivement la totalité de la feuille de travail jointe avant d'intervenir. Après l'intervention, examiner la dernière page et effectuer les travaux en conséquence. **REMARQUE :** Ce document ne constitue pas une autorisation préalable et ne concerne pas la garantie. Il est destiné uniquement à des fins de diagnostic. En cas de questions sur la marche à suivre, OU si la feuille de travail a été exécutée et que le véhicule est revenu avec le même problème, effectuer à nouveau les mesures indiquées dans la feuille de travail et ouvrir un dossier TIPS auprès de l'équipe Carrosserie, Châssis et Multimédia.

NHTSA · bulletin constructeur11038186Années modèle 2007–2008Traduit automatiquement · original : anglaisVoir le détail →
Classe CLK C209 · 2001–2008
BulletinModéréFreinsNA

Bulletin

Complaint Noises/ squealing from the service brake in various driving situations and ambient conditions. Cause Frictional vibrations Remedy The intent of this document is to reduce noise from high performance AMG brakes. AMG brakes are designed for performance under high load and in certain scenarios, can emit noise. Some scenarios are normal and some are induced by driving style like those listed below: Driving style such as two footed driving where the pad might be in constant contact with the rotor. Brake pressure and application style (stopandgo traffic with consistent light brake pressure riding brakes where the brakes cannot cool sufficiently between applications). This can cause the brake pads to glaze and have a smooth/glassy surface which can induce noise. When ambient temperatures rise during summer peak and during cooling and cold winter months. 1. Beginning Diagnostics: a) Check whether the complaint can be reproduced and at which axle or side the noises occur (ideally together with the customer while driving). b) Check the affected system for component wear, mechanical damage or localized overheating damage. Replace damaged components as necessary. c) Assess condition of brake rotors and pads per WIS and visually (i.e. long periods of stagnation, etc...). d) Clean brake components free of brake dust and debris. d) Secure vehicle on a lift. 1. Start the engine and depress the brake pedal 34 times. 2. Check each wheel to see if they turn freely by hand. 3. If a wheel is not turning freely by hand, this needs to be addressed prior to reassessing the noise concern. e) Check whether, apart from this document, an additional document exists for the specific model in question, and if so, work through it and then continue. 2. Specific Axle Work: NOTE: If the brake pad has a metal backing plate, there is no need to affix the adhesive film. Continue with applying chamfer and Molykote as instructed below. IMPORTANT: Be absolutely certain to not allow paste between friction surfaces of the pad and disc! a) If the noises are coming from the front axle. 1. Remove brake linings of front axle. 2. Clean all contact points on brake lining backing plate, including the brake lining guide pins and brake caliper/carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining where the piston contacts the pad backing plate. See picture "Adhesive and Paste Application Area". 4. Be sure to remove both brown paper backing sides of the adhesive film, it is double sided adhesive film. 5. If adhesive is already installed on backing plate where pistons contact the back of the pad, you may gently scrape off and reapply a new adhesive or Molykote. Must not apply the Molykote on top of the adhesive. 6. Chamfer edges (gently round off sharp leading edges) on brake pads. Some pads have vertical grooves, these can be gently chamfered with a triangular file as well. See picture "Chamfering Technique". 7. Apply Molykote to the sides of the backing plate. See picture "Adhesive and Paste Application Area". 8. After installing the brake linings, actuate the brake for 30 seconds. b) If the noises are coming from the rear axle. 1. Remove brake pads of rear axle. 2. Clean all contact points on brake lining backing plate and brake caliper /carrier. 3. Clean bonding surface (where pistons contact back of brake pad). Apply adhesive film to the backplate of the pistonside brake lining. 4. Chamfer edges (round off sharp leading edges) on brake pads. See picture "Chamfering Technique". 5. Grease contact points (red areas on attachment "Rear Pad Grease Area") between brake lining and guide of brake caliper with Molykote. 3. Brake Bedding Process: a) Before trip, the mileage incurred must be clarified with the customer (approx. 30 miles). b) Select a suitable route so speeds of approximately 65 MPH can be achieved. c) If the vehicle is an AMG P3 Hybrid, switch off

NHTSA · bulletin constructeur11037487Années modèle 2008Affiché en anglais d’origine · traduction en attenteVoir le détail →

Dernières discussions

Aucune discussion pour l’instant.

Les défauts et les discussions sont classés par génération : choisissez-en une ci-dessus pour ajouter le vôtre.

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).