Un défaut dans le générateur de gaz du coussin gonflable passager provoque une inflation incontrôlée et le dégagement de fragments métalliques lorsque l’airbag est activé.
Un défaut du générateur de gaz de l'airbag passager provoque un gonflage incontrôlé et la projection de fragments métalliques lors du déclenchement de l'airbag. Cela peut blesser les occupants du véhicule.
Safety Gate · UE16 janv. 2019A12/0089/19Années modèle 2004–2012Traduit automatiquement · original : anglaisVoir le détail →
In 2013 Nissan announced a Recall campaign to replace Takata SPI front passenger airbag inflators. A non-dessicated passenger airbag inflator was used for the replacement. Although there have been no known incidents associated with inflators of this type Nissan has decided to replace all inflators previously repaired with a non-dessicated inflator to a new dessicated version.
DVSA · Royaume-Uni17 août 2018R/2018/100Années modèle 2004–2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
The air bag inflators on affected vehicles were previously checked and deemed to be serviceable. As a precautionary measure the manufacturer has decided to replace them with new assemblies.
DVSA · Royaume-Uni11 déc. 2017R/2017/279Années modèle 2004–2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the vehicle cabin causing injuries to the occupants.
Safety Gate · UE20 oct. 2017A12/1451/17Années modèle 2004–2012Affiché en anglais d’origine · traduction en attenteVoir le détail →
The manufacturer has identified that a potential air leak at the passenger airbag inflators which may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may lead to abnormal deployment of the passenger airbag. In an extreme situation this may result in separation of the airbag housing during deployment causing injury to occupants.
DVSA · Royaume-Uni16 nov. 2015R/2015/093Années modèle 2004–2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create excessive pressure and may result in separation of the airbag housing.
Safety Gate · UE29 mai 2015A12/0717/15Années modèle 2012–2015Affiché en anglais d’origine · traduction en attenteVoir le détail →
null A fault in the gas generator of the front passenger airbag can cause uncontrolled inflation when the airbag is activated. Because the ignition pressure is too high, it can damage the airbag housing and cause injury.
Safety Gate · UE22 avr. 2015A12/0569/15Années modèle 2000–2003Affiché en anglais d’origine · traduction en attenteVoir le détail →
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire.
DVSA · Royaume-Uni22 avr. 2013R/2013/050Années modèle 2003–2006Affiché en anglais d’origine · traduction en attenteVoir le détail →
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag housing.
Safety Gate · UE17 avr. 2013A12/0479/13Années modèle 2010–2013Affiché en anglais d’origine · traduction en attenteVoir le détail →
Certains condensateurs antiparasites (condensateurs de stockage) installés sur le circuit d'allumage du moteur présentent un défaut de fabrication. Si le véhicule continue à être utilisé dans cet état, les bornes de ce condensateur peuvent se mettre en court-circuit et brûler, et dans le pire des cas, cela peut entraîner un incendie.
MLIT · Japon8 mai 19961104572Années modèle 1989–1994Traduit automatiquement · original : japonaisVoir le détail →
The brake system LSV pilot tube may chafe on the vehicle floorpan. Over time the wall thickness may reduce and allow fluid leakage resulting in reduced brake efficiency.
DVSA · Royaume-Uni19 juil. 2000R/2000/028Années modèle 1995–1997Affiché en anglais d’origine · traduction en attenteVoir le détail →
Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).