Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)
Se connecterCréer un compte
NANHTSA · États-Unis00V34000024 oct. 2000

Power train:Clutch assembly

Affiché en anglais d’origine · traduction en attente

Vehicle description: Passenger vehicles. The starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. This possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. If either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.

Risque: If these fragments came into contact with the vehicle's tire, a puncture could occur resulting in loss of vehicle control.

Solution: Dealers will (1) replace the starter ring gear mounting screws and measuring the starter ring gear mounting holes. The measurement of the starter ring gear will determine if the correct position of the mounting holes exists and if the position is incorrect, the starter ring gear will also be replaced; or (2) replace the starter ring gear with a new ring gear having the correctly positioned mounting holes and the replacement of the mounting screws.

Concerne: Ferrari 360 (Années modèle 1999–2000)

Avis officiel ↗

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).