Lecture libre · compte gratuit pour contribuerSuccesseur d’Anticars (2000)

Toyota C-HR II

2023– · 0 défauts documentés · 1 marchés

Ce dossier rassemble les défauts connus de la Toyota C-HR II, rédigés et sourcés par la communauté. La lecture est libre ; un compte gratuit permet de contribuer. Un défaut reçoit le sceau quand assez de contributeurs reconnus l’ont validé.

Défauts les plus graves

Aucun défaut documenté pour cette sélection.

Derniers rappels officiels

Tout voir (2) →
RappelModéréÉlectroniqueNA

High Voltage

Problème : Sur certains véhicules, dans certaines conditions, un problème de logiciel dans l'unité de contrôle du véhicule électrique à batterie (BEV ECU) pourrait faire en sorte que le système d'entraînement électrique s'arrête pendant la conduite. Si cela se produisait, il pourrait y avoir une perte soudaine de puissance aux roues. Risques pour la sécurité : Une perte soudaine de puissance aux roues pourrait augmenter le risque d'accident. Mesures correctives : Pour réduire les risques pour la sécurité, Toyota vous recommande de régler la charge maximale du véhicule à 80 % jusqu'à ce que les réparations dans le cadre du présent rappel aient été effectuées. Toyota doit aviser les propriétaires par la poste et leur demander d'amener leur véhicule chez un concessionnaire pour faire mettre à jour le logiciel du BEV ECU.

Transports Canada2 sept. 20262026421Années modèle 2026Voir le détail →
RappelCritiqueÉlectroniqueNA

Electrical system:Propulsion system

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 C-HR battery electric vehicles. A software programming error may cause the electric drive system battery to become overcharged under certain driving conditions, which can shut down the electric drive system and result in a loss of drive power.

NHTSA · États-Unis2 sept. 202626V570000Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →

Derniers bulletins techniques

Tout voir (20) →
BulletinModéréSuspensionNA

Bulletin

Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: Careful inspection for paint chips/scratches and body dents/dings. Proper operation of electrical accessories (including interior light, clock, and radio reset). Interior cleanliness. Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. GTS+ Health Check Completed PDS Check Sheet Battery Charge Test Print Out GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2027 model year C-HR BEV vehicles

NHTSA · bulletin constructeur11037189Années modèle 2027Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurÉlectroniqueNA

Bulletin

State of Health (SOH): An estimate of battery health that is updated as the vehicle learns from operating and charging conditions over time. Distance Since Last Update: Indicates the distance accumulated since the last SOH calculation. A default mileage value of 40,727 at SOH 100% may be displayed until sufficient vehicle learning is completed. Once SOH value updates from 100%, the Distance Since Last Update value will re-set to 0 miles. Both SOH and Distance Since Last Update values will continue to update as the vehicle continues to learn.

NHTSA · bulletin constructeur11036131Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →
BulletinMineurÉlectroniqueNA

Bulletin

Some 2026 model year bZ, bZ Woodland, and C-HR BEV vehicles may exhibit the Diagnostic Trouble Code (DTC) U255221F associated with the level 3 DC fast charging. Under certain conditions, charging may either operate normally or experience failure, with a charging malfunction message displayed on the Multi-Information Display (MID). This condition is attributed to a control logic issue and potential voltage drop affecting Plug-In Charge Control Computer Assembly functionality. The control logic has been modified to reduce the possibility of this condition.

NHTSA · bulletin constructeur11036124Années modèle 2026Affiché en anglais d’origine · traduction en attenteVoir le détail →

Sources : NHTSA (États-Unis, domaine public), Transports Canada (Licence du gouvernement ouvert – Canada), DVSA (Royaume-Uni, Open Government Licence v3.0), RappelConso et Safety Gate de l'UE (France, Licence Ouverte 2.0), MLIT (Japon, licence de données publiques 1.0) et MOLIT (Corée du Sud, car.go.kr).