Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Audi 80

1978–1995 · 3 generazioni · 7 difetti documentati · 4 mercati
Generazioni
Anno modello
80 B3 (89) · 1986–1992
RichiamoCriticoMotoreNA

Fuel system, gasoline:Fuel injection system

Vehicle description: Passenger vehicles equipped with v6 engines. An internal seal of the fuel injector can malfunction, allowing fuel leakage in the engine compartment.

NHTSA · Stati Uniti23 dic 199898V332000Anni modello 1993Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoCriticoSospensioniUK

Possible failure of front suspension bolts

The bolts securing the front suspension struts to the wheel bearing housings may fracture due to brittleness. This could lead to loss of steering control.

DVSA · Regno Unito14 feb 1992R/1992/009Anni modello 1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B3 (89) · 1986–1992
RichiamoCriticoSospensioniNA

Sterzo:Bloccaggio colonna:Dispositivo antifurto

Bulloni di bloccaggio dello sterzo fabbricati in modo non corretto potrebbero rompersi se il conducente applica una forza eccessiva a un volante bloccato nel tentativo di disinserire il bloccasterzo.

NHTSA · Stati Uniti10 apr 199090V070000Anni modello 1990Tradotto automaticamente · originale: ingleseVedi dettagli →
80 B2 (81) · 1978–1986
80 B2 (81) · 1978–1986
RichiamoCriticoCarrozzeriaNA

Richiamo

In the rear trunk area, the right rear side member for the mounting buffer may not have been welded according to specifications. In the event of an accident resulting in rear end damage it is possible that the right rear side member could break loose, damaging the fuel tank and causing fuel leakage.

Transport Canada27 mar 19811981039Anni modello 1980–1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoCriticoFreniNA

Richiamo

The interior surface of the threaded hole for the front brake caliper brake hoses may contain porous spots which would allow brake fluid to seep out of the calipers during heavy brake applications. Prolonged seepage will eventually reeduce brake fluid level in the reservoir and may lead to complete brake failure.

Transport Canada12 nov 19801980148Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoModeratoMotoreJP

その他(エンジン)

原動機の燃料噴射量等を制御するコンピュータのプログラムが不適切なため、エアコンデ ィショナーを使用している状態等で減速した後、回転数が不安定となり、回転数が上昇し たり又は原動機が停止するおそれがある。

jp9 feb 19991207171Anni modello 1994–1996Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoModeratoAbitacoloUK

Attivazione non programmata dell'airbag del conducente

In condizioni meteorologiche che favoriscono l'accumulo di elettricità statica, l'airbag può attivarsi spontaneamente se il conducente sale o scende dal veicolo mentre è carico di un'elevata carica statica. Ciò può accadere solo quando l'auto è ferma e non mentre è in movimento.

DVSA · Regno Unito26 nov 1997R/1997/075Anni modello 1995–1996Tradotto automaticamente · originale: ingleseVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoModeratoSospensioniJP

エアーバッグ

かじ取り装置のステアリング・ホイール(ハンドル)内に組み込まれているエアバッグ装 置のアースが不適切なものがあり、運転者が乗降する際、身体に帯電した静電気が放電し 、最悪の場合、当該エアバッグが自動的に作動するおそれがある。

jp13 nov 19971206570Anni modello 1994–1996Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
80 B3 (89) · 1986–199280 B4 (8C) · 1991–1995
RichiamoModeratoAbitacoloNA

Airbag:Frontale:Modulo sensore/controllo-inattivo

Veicoli passeggeri. Alcuni sensori degli airbag non sono conformi agli standard di durata di Audi per l'intera vita utile del veicolo.

NHTSA · Stati Uniti6 ott 199797V172000Anni modello 1989–1993Tradotto automaticamente · originale: ingleseVedi dettagli →
80 B4 (8C) · 1991–1995
80 B4 (8C) · 1991–1995
RichiamoModeratoFreniJP

圧力制御伝達部

ブレーキ倍力装置のバキュームポンプ(真空倍力補正装置)内にある樹脂製の羽根(羽 根を回転することにより負圧を発生させる。)が材質不良のため、当該羽根とバキューム ポンプ本体の内部側面が徐々に摩耗して、気密性が損なわれ、このままの状態で使用する と倍力装置に適正な負圧が得られなくなり、制動停止距離がのびるおそれがある。

jp13 mag 19931204870Anni modello 1991–1992Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoModeratoSospensioniJP

パワーステアリング

動力式かじ取り装置(パワーステアリング)のロータリーバルブ(油圧経路を切り換え る弁)に組み付けられている油圧を保持するための樹脂製リングに材質不良のものがあり 、冷間時に当該リングが収縮し、オイルが漏れて、このままの状態で使用するとハンドル が重くなるおそれがある。

jp13 mag 19931204860Anni modello 1992Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
80 B4 (8C) · 1991–1995
RichiamoModeratoSospensioniUK

Possible leakage of power steering fluid

Power steering fluid may leak from the top seal of the steering assembly pinion housing into the vehicle passenger compartment.

DVSA · Regno Unito27 apr 1993R/1993/013Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–198680 B3 (89) · 1986–1992
RichiamoModeratoCambioNA

Powertrain

On vehicles with automatic transmission, a low oil level in the differential could cause premature bearing and gear wear and eventual failure of the differential. This could result in possible drive wheel lock-up and loss of vehicle control. Correction: Differential will be drained and oil will be replaced with an advanced design high performance gear oil. Owners will be provided with a revised maintenance schedule.

Transport Canada22 gen 19931993008Anni modello 1985–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–198680 B3 (89) · 1986–199280 B4 (8C) · 1991–1995
RichiamoModeratoCambioNA

Power train:Axle assembly

The differential oil of the transaxle is lost over time due to evaporation. Low oil levels cause premature bearing and gear wear and eventual failure of the differential.

NHTSA · Stati Uniti11 gen 199393V006000Anni modello 1985–1991Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoMotoreNA

Engine

On vehicles with automatic transmission, the idle stabilizer valve may experience excessive wear. Such wear causes idle fluctuations which are barely noticeable at first, but ultimately could result in unsatisfactory driveability. Correction: Idle stabilizer valve will be replaced. V.I.N. Range wau***8**fa000001 to wau***8**ga138778

Transport Canada26 mag 19871987054Anni modello 1985–1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoAltroNA

Vehicle speed control

Excessive wear of idle stabilizer could cause idle fluctuations.

NHTSA · Stati Uniti18 mag 198787V069000Anni modello 1985–1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoAbitacoloNA

Seats And Restraints

The seat belt buckles manufactured by afg and located on the rear seat of the audi 4000 and the right front seat of the audi 5000 may not lock securely, although the metal tongue of the seat belt has been fully engaged. In the event of an abrupt brake application or on impact, these buckles could become unlocked. Correction: Vehicles will be inspected and all seat belt buckles manufactured by afg will be replaced. V.I.N. Range audi 4000 - wau***8*ga*124887 to wau***8*ga*137554 audi 5000 - wau**44*g**087473 to wau**44*g**099448

Transport Canada4 set 19861986098Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoAbitacoloNA

Seat belts:Front:Buckle assembly

Rear or front right seat belt locks may not properly engage. Consequence of defect: Seat belts could separate in event of heavy brake application or impact and thus subject passengers to injury.

NHTSA · Stati Uniti18 ago 198686V113000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoMotoreNA

Fuel system, gasoline:Fuel injection system

The fuel pump may stop functioning without warning. This can occur because an electrical connector in the fuse panel may overheat and interrupt the electrical circuit.

NHTSA · Stati Uniti9 nov 198383V117000Anni modello 1980–1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoCarrozzeriaNA

Structure:Frame and members

Rear bumper system on certain vehicles may not have been properly welded during assembly. In the event of a rear end collision, the right side bumper supportor could break loose, damage the fuel tank and allow fuel to leak.

NHTSA · Stati Uniti24 mar 198181V039000Anni modello 1980–1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
80 B2 (81) · 1978–1986
RichiamoModeratoFreniNA

Service brakes, hydraulic:Foundation components:Disc:Caliper

On certain vehicles, porous spots may have developed on the interior surface of the threaded hole for the brake hose during the moulding process. These spots allow brake fluid to seep from the calipers during heavy brake applications.

NHTSA · Stati Uniti12 nov 198080V146000Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).