Left handed driver's side shoulder belt anchor plate may be upside down in lock pillar so that the unthreaded slot of the plate aligned with the hole in the lock pillar. This resulted in the anchor bolt being driven into the slot instead of the threaded hole of the anchor plate. Consequence of defect: In a vehicle crash, belt anchor bolt may pull loose from anchor plate, thus failing to comply with fmvss 210, seat belt assembly anchorages, and increases likelihood of injury to occupant.
NHTSA · Stati Uniti14 lug 198686V093000Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Su alcuni veicoli, un allargamento eccessivo del foro pilota nel piastrone del freno posteriore potrebbe consentire la rotazione del cilindro della ruota, con possibile perdita di liquido freni dai freni posteriori e perdita della capacità di frenata posteriore. Ciò comporterebbe maggiori spazi di arresto e un possibile incidente.
Nota: solo veicoli in Ontario e Quebec.
Transport Canada28 mag 19861986056Anni modello 1980–1984Tradotto automaticamente · originale: ingleseVedi dettagli →
The rear bumper may fracture during a rear end collision, puncture the fuel tank, and cause a fuel leak. Consequence of defect: A fuel leak creates the potential for a fire which could result in burn injuries to persons in or near the car.
NHTSA · Stati Uniti29 apr 198585V049000Anni modello 1984–1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Excessive enlargement of the wheel cylinder pilot hole in the rear brake backing plate could allow the wheel cylinder to rotate and cause loss of brake fluid. Consequence of defect: A loss of brake fluid leads to loss of rear brake action, creating the potential for an accident. Front brakes would remain operational.
NHTSA · Stati Uniti29 apr 198585V048000Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rear bumper may fracture during a rear end collision, puncture the fuel tank and cause a fuel leak. Should this occur, the possibility of a fire would exist which would cause burn injuries to persons in or near the vehicle.
Transport Canada23 apr 19851985043Anni modello 1984–1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
One of the three steering gear to frame bolts may not have been tightened to the required specification. Consequence of defect: The steering gear could come loose from the frame causing a loss of steering control and a possible vehicle crash without warning.
NHTSA · Stati Uniti5 mar 198585V024000Anni modello 1984Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The axle retaining "c" clip in the differential may dislodge and allow the axle, wheel and brake drum to separate from the vehicle when subjected to side forces. Axle separation could result in loss of vehicle control and possible crash.
Transport Canada11 gen 19851985010Anni modello 1980Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The tie rods are part of the steering linkage and transmit turning movements to the wheels. The bolts that fasten the tie rods to their adjusters may not be tight enough. This could allow the tie rod to loosen and detach itself from the adjuster.
NHTSA · Stati Uniti10 ott 198484V124000Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicles were assembled with inadequate clamp load on the tie rod adjuster. This would allow the tie rod to loosen and separate from the tie rod adjuster. Tie rod separation could cause a loss of steering control which could result in a vehicle crash without prior warning.
Transport Canada5 ott 19841984121Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The rear brake system brake pipe from the master cylinder to the proportioner valve on these vehicles may be contacting the air cleaner resonator bracket. Over an extended period of operation, the brake pipe could wear through sufficiently to cause a loss of brake fluid and a partial loss of braking action. If a vehicle happens to be in motion at a time when minimum stopping distance is required, this condition could result in a vehicle crash without prior warning. Models equipped with 5.7 l. V-8 diesel engines.
Transport Canada7 ott 19831983083Anni modello 1983Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The fuel inlet pipe may develop cracks at the flared end leading into the carburetor due to vibrations in operation. These cracks could result in fuel leakage.
NHTSA · Stati Uniti24 ago 198282V080000Anni modello 1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicles equipped with turbocharged v6 engines. Under certain operating conditions fuel inlet pipe vibration may cause cracks in the pipe at the flared end at the carburetor. These cracks can allow a fuel leak creating the possibility of fire.
Transport Canada20 ago 19821982067Anni modello 1982Mostrato in inglese originale · traduzione in attesaVedi dettagli →
"tx" heavy duty wheels may have been manufactured with laminated steel. The wheel disc may fracture and the wheel and tire could partially or completely separate from the vehicle.
NHTSA · Stati Uniti23 mar 198181V036000Anni modello 1981Mostrato in inglese originale · traduzione in attesaVedi dettagli →
A piccola boccola in nylon nella staffa (bail) del servocomando del cruise control può spostarsi dalla sua sede, con il possibile risultato di aumenti intermittenti del regime del motore o di "dieseling". Questa condizione potrebbe inoltre far usurare il gruppo asta del servocomando fino a rompere la sfera e impigliarsi in altri componenti, con il possibile risultato di un acceleratore bloccato. Ciò potrebbe causare la perdita del controllo del veicolo e un possibile incidente. Correzione: sul servocomando del cruise control verrà installato un kit di boccole.
Transport Canada4 lug 19891989092Anni modello 1984–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Una piccola boccola in nylon nel perno di aggancio del servocomando del cruise control può spostarsi dalla sua sede, causando aumenti intermittenti e imprevisti del regime motore oppure dieselizzazione (funzionamento del motore dopo lo spegnimento dell'accensione).
NHTSA · Stati Uniti16 giu 198989V102000Anni modello 1984–1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Questi veicoli non sono conformi alla norma c.M.V.S.S. 1105 - emissioni evaporative. Correzione: tra il canister a carbone attivo e il carburatore verrà installata una valvola di controllo dello spurgo a stadi.
Transport Canada10 nov 19881988154Anni modello 1981Tradotto automaticamente · originale: ingleseVedi dettagli →
I veicoli equipaggiati con il cambio 200-4R potrebbero avere un collegamento della valvola manuale formato in modo non corretto. Ciò potrebbe causare il distacco del collegamento, con la conseguenza che la selezione della marcia non corrisponde all'indicatore del cambio. Inoltre, l'auto potrebbe essere avviata con una marcia innestata. Pertanto, durante la selezione di una marcia o l'avviamento del veicolo, è possibile che il veicolo si muova improvvisamente in una direzione imprevista. Ciò potrebbe provocare un incidente senza preavviso. Correzione: il collegamento della valvola manuale verrà sostituito.
Transport Canada22 ott 19871987114Anni modello 1987Tradotto automaticamente · originale: ingleseVedi dettagli →
Certain vehicles equipped with hatchroof option may not comply with CMVSS 210 - Seatbelt Assembly Anchorages. Drivers side shoulder belt anchor plate may be located upside down which can result in the anchor bolt pulling loose in an accident.
Transport Canada16 lug 19861986077Anni modello 1986Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The throttle return spring assembly may fail preventing the throttle from returning to the closed (idle) position when the accelerator pedal is released. Consequence of defect: Engine speed may not decrease and loss of accelerator control could result in an accident without prior warning.
NHTSA · Stati Uniti21 feb 198686V030000Anni modello 1985Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Su alcuni veicoli, un allargamento eccessivo del foro di centraggio nella piastra di supporto posteriore potrebbe consentire la rotazione del cilindro della ruota, con possibile perdita dell'azione frenante posteriore.
Transport Canada29 apr 19851985049Anni modello 1980Tradotto automaticamente · originale: ingleseVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).