On certain passenger vehicles, the camshaft position sensor may melt resulting in a burning smell and visible smoke, which may subsequently lead to the melting of the camshaft cover and the camshaft position sensor wire harness.
NHTSA · Stati Uniti6 ago 200404V394000Anni modello 1998–2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain passenger vehicles, the camshaft position sensor may melt resulting in a burning smell and visible smoke, which may subsequently lead to the melting of the camshaft cover and the camshaft position sensor wire harness.
NHTSA · Stati Uniti14 lug 200404V357000Anni modello 1998–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain passenger vehicles fail to conform to the requirements of CMVSS no. 201, "occupant protection in interior impact." In the event of a crash in which the air bags do not deploy, there is a possibility of increased head injury to the front seat passenger should contact with the passenger side air bag cover occur. Correction: Dealers will install new energy absorbing air bag mounting brackets.
Transport Canada3 giu 20022002105Anni modello 1999–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles equipped with alloy wheels and sold in puerto rico. These wheels were manufactured without the steel bushing inserts around the wheel bolt openings, allowing friction between the wheel bolt seats and the wheel bolts. This can result in the bolts loosening during hard braking.
NHTSA · Stati Uniti3 dic 199999V336002Anni modello 1998–2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles equipped with alloy wheels. These wheels were manufactured without the steel bushing inserts around the wheel bolt openings, allowing friction between the wheel bolt seats and the wheel bolts. This can result in the bolts loosening during hard braking.
NHTSA · Stati Uniti30 nov 199999V336001Anni modello 1998–2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The Camshaft position sensor may overheat causing the engine management warning light to illuminate and in the worst case a localised thermal incident may occur
DVSA · Regno Unito15 ott 2004R/2004/142Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain passenger vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact."
NHTSA · Stati Uniti8 mag 200202V131002Anni modello 1998–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Certain passenger vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 201, "occupant protection in interior impact."
NHTSA · Stati Uniti8 mag 200202V131001Anni modello 1998–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the ECM wiring harness which is located in the passenger footwell area may chafe against a caulked body seam due to movement of the passenger's feet and result in a short circuit to ground. There is a possibility that engine driveablity may be affected and/or the engine may stall. Correction: Extra protection will be applied to the wiring harness and an additional tie strap will be installed to reroute the ECM harness away from the body seam.
Transport Canada30 mar 20012001073Anni modello 2000–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
NHTSA · Stati Uniti1 feb 200101V020001Anni modello 2000–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. A wiring harness, located beneath the carpet in the front passenger floor area, can become damaged by passenger traffic as the wire harness is rubbed against a body seam in the floor panel.
NHTSA · Stati Uniti25 gen 200101V020000Anni modello 2000–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, insufficient wheel bolt torque could result in wheel separation and a possible crash without prior warning. Correction: Wheel bolt torque will be increased to 120nm (88lb/ft).
Transport Canada18 gen 20002000021Anni modello 1999–2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. These vehicles do not comply with the requirements of fmvss no. 214, "side door strength." incorrect position of the side impact pad to the rear, instead of the middle, of the door assembly.
NHTSA · Stati Uniti1 giu 199999V090002Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, a pad located on the left hand and right hand door side impact beam was incorrectly positioned during vehicle manufacturing. The positioning of this pad is integral to the vehicle complying with the requirements of CMVSS 214 - Side Door Strength. Correction: All vehicles have had both left and right door pads re-positioned and secured in their intended position.
Transport Canada19 mag 19991999096Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. These vehicles do not comply with the requirements of fmvss no. 214, "side door strength." incorrect position of the side impact pad to the rear, instead of the middle, of the door assembly.
NHTSA · Stati Uniti10 mag 199999V090001Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vehicles. These vehicles do not comply with the requirements of fmvss no. 214, "side door strength." incorrect position of the side impact pad to the rear, instead of the middle, of the door assembly.
NHTSA · Stati Uniti27 apr 199999V090000Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: 3 and 4-door passenger sedans. The steering wheel center bushing connecting the steering wheel hub to the steering column can slip.
NHTSA · Stati Uniti1 dic 199898V305000Anni modello 1998–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).