The driver's airbag emblem may have become loose or detached
The driver�s airbag emblem may have become loose or detached.
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Dodge Caravan (tutte le generazioni)
The driver�s airbag emblem may have become loose or detached.
Chrysler (FCA US LLC) is recalling certain 2008-2010 Chrysler Town and Country and Dodge Grand Caravan and 2007-2011 Dodge Nitro vehicles. These vehicles may have a loose or missing brand emblem in the center of the steering wheel. The loose emblem or the securing nuts for the emblem within the driver air bag module may become projectiles in the event of a driver air bag deployment.
Nella centralina dell'airbag può verificarsi corrosione.
null Corrosion in the control unit of the vehicle occupant protection system may lead to the front seat airbags not deploying correctly.
FCA US LLC (Chrysler) is recalling certain model year 2009 Dodge Journey vehicles manufactured December 31, 2007, to August 31, 2008, 2008-2009 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured June 18, 2007, to August 31, 2008. In the affected vehicles, the air bag control units may corrode and fail.
This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key. The key fob (if applicable), should also be removed from the key ring. Chrysler Group LLC (Chrysler) is recalling certain model year 2009-2010 Dodge Journey vehicles manufactured June 29, 2007, to June 17, 2010, and 2008-2010 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured January 26, 2007, to June 17, 2010. Road conditions or some other jarring event may cause the ignition switch to move out of the run position, turning off the engine.
De regeleenheid van het airbagsysteem is mogelijk aangetast door water uit de condensafvoer van het aircosysteem. Hierdoor kan kortsluiting in deze regeleenheid ontstaan.
Chrysler is recalling certain model year 2008 chrysler grand voyager, town and country and dodge grand caravan vehicles manufactured from june 24, 2007, through july 30, 2008. These vehicles may experience a heating and air conditioner (hvac) condensate leak from the hvac drain grommet onto the occupant restraint control (orc) module, which can lead to the illumination of the airbag warning light and a potential inadvertent airbag deployment without warning.
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008 CHRYSLER TOWN AND COUNTRY AND DODGE GRAND CARAVAN VEHICLES. THESE VEHICLES MAY EXPERIENCE A WATER LEAK At THE HEATING AND AIR CONDITIONER (HVAC) DRAIN GROMMET WHICH CAN LEAD TO ILLUMINATION OF AIRBAG WARNING LIGHT AND A POTENTIAL INADVERTENT AIRBAG DEPLOYMENT.
Chrysler is recalling certain model year 2005-2006 dodge caravan, grand caravan and chrysler town & country vehicles originally sold in or currently registered in the states of connecticut, delaware, iowa, illinois, indiana, kansas, kentucky, massachusetts, maine, maryland, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, north dakota, ohio, pennsylvania, rhode island, south dakota, tennessee, utah, vermont, virginia, west virginia, wisconsin, alaska and the district of columbia. The front crash sensors may crack under certain environmental conditions and allow water to enter into the sensor. This can cause the sensor to become inoperative and illuminate the airbag warning light. These sensors were added to enhance the performance of the airbag system in certain frontal crashes.
On certain vehicles the left or right front supplemental airbag sensors may crack under certain conditions, which can allow water to enter into the sensor. This can cause the airbag warning lamp to illuminate. A malfunction of one or both of the supplemental sensors will not adversely affect safety or cause a failure to comply with government standards. The single-point sensor in these vehicles, which is located in the airbag control module, is operational even if both supplemental sensors are inoperative. DaimlerChrysler has decided to launch a Customer Satisfaction Notification to advise customers that these front airbag sensors will be replaced with redesigned sensors to reduce the potential for damage. This action is not being conducted under the Motor Vehicle Safety Act.
Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
Continued flexing of the inboard front seat belt buckle assembly straps can result in eventual strap failure near the anchor location. This could result in the increased risk of front seat occupant injury during a sudden stop or vehicle crash. Correction: Straps will be inspected and reinforced or replaced with a strengthened version as required.
Inboard front seat belt buckle assembly straps can suffer fatigue failure of the strap near its anchor position.
First rear seats were installed with an incorrect left side seat riser which causes failure to comply with the seat and seat belt loading requirements of fmvss 207, seating systems. Consequence of defect: If an accident occurred, the seats may become detached, causing serious injuries to its occupants.
Il logo del marchio potrebbe non essere stato applicato correttamente sull'airbag del conducente.
Driving specialties ltd is recalling 2 model year 2006 and 2007 conversion vans equipped with vmi/ricon 6-way power seat bases. There is a possibility of a defective weld at the joint between the pivoting plate and the pivoting plate pin.
Access options is recalling certain trucks and vans built on ford e150, e350, toyota sienna, and dodge grand caravan chassis and equipped with vmi/ricon 6-way power seat bases. The six way power seat base may have a defective (cold) weld on the pivot pin which is welded to the swivel plate. The weld could fail.
All in One Mobility richiama alcuni furgoni convertiti di gli anni modello dal 1997 al 2008 equipaggiati con basi di sedile a 6 vie motorizzate VMI/Ricon. Esiste la possibilità di una saldatura difettosa nel giunto tra la piastra girevole e il perno della piastra girevole.
Arizona mobility products (amp) is recalling one 2005 and one 2007 conversion vans built on dodge grand caravan chassis equipped with vmi/ricon 6-way power seat bases. There is a possibility of a defective weld at the joint between the pivoting plate and the pivoting plate pin.
Certain minivans are being recalled that were originally sold in or currently registered in the 27 states plus the district of columbia that use greater amounts of salt for winter road deicing. The up-front (uf) air bag sensors that contain brass bushings installed in these vehicles may corrode and crack allowing water to enter the sensor. These sensors provide enhanced air bag performance in certain types of frontal crashes.
On certain minivans, the driver's air bag may become disabled due to a failure of the clockspring, which is located in the hub of the steering wheel.
After performing the ncap test, it was discovered that on certain minivans equipped without the available "stow 'n go" seating option, the right front seat belt retractor assembly may have been improperly assembled.
On certain mini vans, the clockspring assembly may have been wound incorrectly during the vehicle assembly process.
Vehicle description: Certain mini vans fail to comply with requirements of fmvss no. 225, "child restraint anchorage systems." the owner manuals supplied with these vehicles do not indicate which seating positions are equipped with tether anchorages and child restraint anchorage systems as required by the standard.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).