I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
NHTSA · bollettino del costruttore10229181Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
NHTSA · bollettino del costruttore10223854Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
NHTSA · bollettino del costruttore10223602Anni modello 2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Wrong vehicle emission control information (veci) label may have been in stalled on above listed vehicles. As a result, the wrong label will cause vehicle to fail an emission test. *ak
NHTSA · bollettino del costruttore601476Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only.
NHTSA · bollettino del costruttore10191455Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
This bulletin reinforces a requirement to cease the current practice of using supplemental oil additive treatments in all diamler chrysler engines. *tt
NHTSA · bollettino del costruttore620063Anni modello 2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Some vehicles may exhibit an idle undershoot or die out during engine starting and may be caused by iac lost steps. *ak
NHTSA · bollettino del costruttore603112Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).