On certain van and wagon vehicles equipped with 4-wheel antilock brake systems (abs), aftermarket batteries may leak electrolyte onto the abs control module connector, which can compromise sealing integrity of the connector.
NHTSA · Stati Uniti12 apr 200404V185000Anni modello 1998–2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Vans and wagons not equipped with power front seats. In the presence of road salt, water, and possibly other debris, the power seat connector located beneath the driver's seat could develop a high resistive short circuit that cycles the circuit breaker.
NHTSA · Stati Uniti2 ago 200101V253000Anni modello 2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: The ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. Louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. Important: Vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.
NHTSA · Stati Uniti8 mag 200101V153000Anni modello 1997–2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of fmvss no. 209, "seat belt assemblies." the front seat belt retractor may not comply with the requirements of the standard.
NHTSA · Stati Uniti11 apr 200101V119000Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Pickup trucks equipped with gasoline engines and manual transmissions. The underbody hydraulic clutch line heat shield is too short, allowing the plastic clutch line material to be directly exposed to exhaust temperatures. It is possible to exceed the melting temperature of the clutch line material.
NHTSA · Stati Uniti16 lug 199999V190000Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Pickup trucks equipped with manual transmission, v10 engines and four-wheel-drive transfer cases. Under sustained maximum rated vehicle load, while driving up a steep grade in four-wheel-drive low range in hot ambient conditions, the local exhaust temperature proximate to the hydraulic clutch line can generate line temperatures that exceed the temperature limit of the clutch line material. If this condition occurs and the clutch is depressed, the line could rupture.
NHTSA · Stati Uniti6 mag 199999V115000Anni modello 1994–1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Passenger vans and wagons equipped with compressed natural gas (cng). The fuel hose that connects the left and right fuel rails may shrink and leak fuel if exposed to high engine operating temperatures.
NHTSA · Stati Uniti11 mar 199999V044000Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Vans equipped with compressed natural gas (cng) fuel tanks. Incorrect fuel tank straps were installed on the small fuel tank. As a result, the fuel tank may not be securely attached to the vehicle.
NHTSA · Stati Uniti24 feb 199999V034000Anni modello 1999Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the low pressure diesel fuel supply tube located in the engine compartment between the filter and the high pressure pump may fracture and leak, possibly resulting in an engine compartment fire. Correction: The steel low pressure diesel fuel supply tube will be replaced with a rubber isolated tube.
Transport Canada21 set 19981998185Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Light duty pickup trucks equipped with 5.9l - 24 valve diesel engine. The low pressure diesel fuel supply tube located in the engine compartment between the filter and the high pressure pump can fracture.
NHTSA · Stati Uniti8 set 199898V207000Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, an exhaust system heat shield attaching screw is too close to the underbody fuel line. Vibration and vehicle motion during normal vehicle operation may cause the fuel line to rub against the screw eventually resulting in fuel leakage. Correction: Heat shield attaching screw will be removed and replaced with a butyl rubber adhesive. Fuel tubes showing any signs of abrasion damage will be replaced.
Transport Canada26 ago 19981998166Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Light duty trucks equipped with either a 8.0l v-10 engine or a 5.9l v-8 heavy duty gasoline engine. An exhaust system heat shield attaching screw is too close to the underbody fuel line. The line can rub against the screw, possibly causing fuel leakage.
NHTSA · Stati Uniti6 ago 199898V182000Anni modello 1998Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the fuel tank mounted rollover valve may allow liquid fuel to leak onto the ground under certain conditions. In the presence of an ignition source, a fire could occur. Correction: The fuel tank rollover valve will be replaced with a float type rollover valve.
Transport Canada20 nov 19971997206Anni modello 1994–1996Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Light duty pickup trucks equipped with gasoline engines. The fuel tank mounted rollover valve can allow liquid fuel to leak onto the ground under certain vehicle operating conditions.
NHTSA · Stati Uniti13 nov 199797V199000Anni modello 1994–1996Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Vehicle description: Light duty trucks equipped with diesel engines. The exhaust pipe contacts or is in close proximity to the outer dash panel silencer pad.
NHTSA · Stati Uniti18 ago 199797V126000Anni modello 1997Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the exhaust pipe may be in contact or close proximity to the outer dash panel silencer pad. It is possible that the pipe can generate sufficient heat to cause the pad material to smolder and may ignite adjacent materials resulting in a vehicle fire. Correction: The outer dash silencer pad adjacent to the exhaust pipe will be removed and replaced by a thermal heat shield on the exhaust pipe.
Transport Canada14 ago 19971997139Anni modello 1997Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the transmission fluid temperature could exceed the melting point of the connector which retains the fluid line to the transmission. Should this occur, the fluid line may become disconnected from the transmission and fluid may spray onto the exhaust manifold, possibly resulting in a fire. Correction: The connector fittings on the high temperature side of the transmission fluid cooler line will be replaced with connectors incorporating a stainless steel retainer.
Transport Canada7 mag 19971997096Anni modello 1994–1997Tradotto automaticamente · originale: ingleseVedi dettagli →
Under certain high load operating conditions, the transmission fluid temperature can exceed the melting point of the material used in the connector to retain the fluid line to the transmission.
NHTSA · Stati Uniti5 mag 199797V084000Anni modello 1994–1997Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the plastic pins and metal clip that retain the steering column lower shaft could break, causing the lower shaft to separate from the upper shaft. This would result in loss of steering control and a possible crash without prior warning. Correction: A restraining sleeve will be added to the intermediate shaft to limit the amount of axial steering column shaft movement possible in the event the plastic pins and metal clip are broken.
Transport Canada20 nov 19961996187Anni modello 1994–1995Mostrato in inglese originale · traduzione in attesaVedi dettagli →
If the plastic pins and metal clip that retain the lower steering shaft in the upper shaft break, the lower steering shaft can separate from the upper shaft.
NHTSA · Stati Uniti18 nov 199696V230000Anni modello 1994–1995Mostrato in inglese originale · traduzione in attesaVedi dettagli →
The fasteners which secure the generator cartridge fuse to the power distribution center may have an improper clamp load. Improper clamping can result in arcing at the connection.
NHTSA · Stati Uniti12 dic 199595V237000Anni modello 1996Mostrato in inglese originale · traduzione in attesaVedi dettagli →
On certain vehicles, the extra keys operator's key ring may become temporarily lodged in the airbag screw access holes on the steering wheel back cover, hampering steering wheel return. In some cases, the force used to return the wheel may also cause the vehicle ignition to be turned off. Correction: Plugs will be installed in the steering wheel back cover airbag screw access holes to prevent the potential for any key interference. *note: Chryler recall #642 supercedes this recall campaign, t.c. 95-108.
Transport Canada24 ago 19941994133Anni modello 1994Mostrato in inglese originale · traduzione in attesaVedi dettagli →
These vehicles do not comply with c.M.V.S.S. 301 - fuel system integrity. A routine rear impact compliance test resulted in fuel leakage during rollover stage in excess of that allowed by the standard. Correction: A rail reinforcement bracket will be installed to the undercarriage to prevent damage to the fuel tank filler nipple and hose.
Transport Canada26 lug 19941994119Anni modello 1994Mostrato in inglese originale · traduzione in attesaVedi dettagli →
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).