Bollettino
Hard start/no start/loss of engine RPM after refueling - built on or before 11/09/2013
🔔 Crea un account gratuito per ricevere avvisi via e-mail su Ford Escape (tutte le generazioni)
I bollettini tecnici (TSB) sono istruzioni di riparazione che i costruttori inviano ai concessionari su problemi noti. Non sono richiami di sicurezza, ma spesso confermano un difetto.
Hard start/no start/loss of engine RPM after refueling - built on or before 11/09/2013
2017 vehicles equipped with a 2.0L GTDI, 2.3L GTDI, or 2.5L PFI engine will either be equipped with a diamond washer on each side of a smooth-faced crankshaft timing sprocket (early build), or a crankshaft timing sprocket with laser etched faces and no diamond washers (late build). If equipped, diamond washers should be cleaned, inspected and reused, if undamaged. Diamond washers should never be installed along with a laser etched crankshaft timing sprocket. Related WSM procedure information is in the process of being updated.
3.0l duratec engine--oil leak (low ambient temperature)--dipstick or crankshaft seal. *nj
Possible engine damage - install special service tools prior to removing crankshaft pulley bolt - service tip. *tt
Engine overheating and/or loss of air conditioning (a/c) performance. *tt
Water pump pulley cover no longer installed. *tt
Oil leak from dipstick or front or rear crankshaft seals - heated pcv service kit - 3.0l duratec engine. *tt
Some vehicles may exhibit vacuum or air leaks in the intake manifold and / or engine system causing diagnostic trouble codes p0171 and or p0174. *tt
2024 Escape and Bronco Sport vehicles equipped with 1.5L engines should add local fuel once the vehicle arrives at the dealership to reduce the risk of various engine performance concerns such as: rough operation, idle quality, engine misfires, lack or loss of engine power. These conditions may occur due to different fuel specifications between the manufacturing plant and the final market. Make sure that the vehicles in stock have local fuel added.
Certain 2023 Model Year Escape and Corsair Vehicles Equipped with a 2.0L Engine - Seal Replacement for Turbocharger Coolant Return Tube to Cylinder Head
Some 2021 Escape/Escape Hybrid vehicles built on 10-Aug-2021 and through 20-Sep-2021 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern. Due to parts availability, a repair procedure may not be available until 1st quarter, 2022. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual (WSM), Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive and that replacement parts will be available soon. Schedule a follow-up appointment for 1st quarter, 2022 and when the repair procedure and parts become available, contact the customer to arrange repairs. Monitor OASIS for updates.
Some 2021 Escape/Escape Hybrid vehicles built on 10-Aug-2021 through 20-Sep-21 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern and a repair procedure should be available late October. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual, Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive in the meantime. Schedule a follow-up appointment for late October and when the repair procedure becomes available, contact the customer to arrange repairs. Monitor OASIS for updates.
Some 2021 Escape Hybrid vehicles built on 10-Aug-2021 through 20-Sep-21 may exhibit a front-end flutter/rattle noise at 65 mph (105 km/h) or higher. Engineering is aware of this concern and a repair procedure should be available late October. Using the Ford Diagnosis and Repair System (FDRS), command the active grill shudders open and closed to see if the flutter/rattle noise changes. If the flutter/rattle noise does not change, continue with normal Workshop Manual, Section 100-04 for diagnostic and repair information. If the flutter/rattle noise does change, advise the customer that the vehicle is safe to drive in the meantime. Schedule a follow-up appointment for late October and when the repair procedure becomes available, contact the customer to arrange repairs. Monitor OASIS for updates.
Some 2020-2021 Escape/2021 Bronco Sport vehicles equipped with a 1.5L engine may exhibit a low oil pressure warning with diagnostic trouble code (DTC) P0524. The Workshop Manual (WSM) Sections 303-14, 303-00, and 413-01 have been updated with new information to aid in diagnosis of the low oil pressure warning and DTC P0524.
Some 2020 Escape vehicles equipped with a 1.5L EcoBoost engine and built on or before 30-Nov-2019 may exhibit a vibration at idle. This may be due to the engine mounts. To correct the condition, follow the Service Procedure steps to replace the engine mounts and perform the engine mount neutralization procedure.
Some 2020 Ford and Lincoln vehicles equipped with a TCU may exhibit incomplete user authorization, no authorization pop-up on the SYNC infotainment system, vehicle connectivity concerns, vehicle location disabled message and/or various FordPass/LincolnWay App command/control concerns. To correct these conditions, ensure that customer connectivity settings (CCS) are turned on in the SYNC system. If the concerns persist after CCS is turned on, turn CCS OFF, perform an ignition cycle, and turn CCS settings back on. After any CCS changes, force-close and relaunch the FordPass/ LincolnWay app on the customers phone. Once CCS is turned on, program the TCU to the latest IDS/FDRS version level. If the concern is still present, follow normal diagnostics in Workshop Manual (WSM), Section 415-00. Refer to PTS OASIS home page for TCU version identification. For claiming, use causal part 14G229.
Some 2019 Escape/Fusion vehicles equipped with a Sony branded audio system may exhibit AM presets that may not save and/or may be lost after an ignition cycle. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
Certain 2017 Model Year Multiple Vehicle Lines - California Emission Warranty Parts Coverage
Some 2017 Escape vehicles equipped with a 1.5L Gasoline Turbocharged Direct Injection (GTDI) engine and built on or before 1-Feb-2017 may exhibit an illuminated MIL with DTC P051B. Follow the Service Procedure steps to correct the condition.
Some 2014-2017 Fusion and 2017 Escape vehicles equipped with a 1.5L Gasoline Turbocharged Direct Injection (GTDI) engine may exhibit low coolant, white exhaust smoke and an illuminated MIL if diagnostic trouble codes (DTCs) P0217, P300, P0301, P0302, P0303, P0304, P0316 and/or P1299 are present. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (CAC). Follow the Service Procedure steps to correct the condition.
Some 2012-13 Focus and 2013 Escape/C-MAX vehicles may have the wrong part in the box for the BCM (base 14A068). The suspect service part number is GV6Z-14A068-G. The wrong part will have an engineering number of GV6T-14A073-GD and it will not work. The correct part will have engineering part number of GV6T-14A073-with a suffix of XA, XB, XC, or XF. Dealers should utilize the normal return process of a miss packaged part. Continue to monitor OASIS. When this concern is resolved, an update will be provided.
Some 2017 escape vehicles with electronic manual temperature control (emtc) and ford original accessory or fia scalable remote start systems may exhibit a concern of the air distribution and temperature controls becoming locked after 5 minutes when the vehicle is started with the remote start system. After approximately 5 minutes of driving the air distribution and temperature controls lock and requests for air distribution and temperature changes will not occur. The heating ventilation and air conditioning (hvac) controls correctly indicate when changes are selected but the requested air distribution and temperature control functions will not occur. Normal operation is restored when the key is cycled. This concern does not affect blower motor operation. Engineering is investigating this concern. Monitor oasis for updates.
Some 2014-2017 fusion and 2017 escape vehicles equipped with a 1.5l gasoline turbocharged direct injection (gtdi) engine and an odometer reading 16,000 km (10,000 miles) or above may exhibit low coolant, white exhaust smoke and may also exhibit an illuminated mil with diagnostic trouble codes (dtcs) p0217, p0300, p0301, p0302, p0303, p0304, p0316 and/or p1299. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (cac). Follow the service procedure steps to correct the condition
Some 2014-2017 fusion and 2017 escape vehicles equipped with a 1.5l gasoline turbocharged direct injection (gtdi) engine may exhibit low coolant, white exhaust smoke and an illuminated mil if diagnostic trouble codes (dtcs) p0217, p300, p0301, p0302, p0303, p0304, p0316 and/or p1299 are present. This condition may be due to an intake manifold bolt backing out causing damage to the charge air cooler (cac). Follow the service procedure steps to correct the condition
Some 2017 escape vehicles equipped with a 1.5l gtdi engine may exhibit a timing belt saw or chirp type noise at idle while the vehicle is in transport mode. The noise is noticeable because of an elevated idle speed while the vehicle is in transport mode. Do not remove the vehicle from transport mode to diagnose or perform a repair for this noise. Vehicle should only be removed from transport mode as directed by the pre-delivery procedure.
Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0), MLIT (Giappone, Public Data License 1.0) e MOLIT (Corea del Sud, car.go.kr).