Lettura libera · account gratuito per contribuireErede di Anticars (2000)

Mazda MPV

1988–2016 · 3 generazioni · 25 difetti documentati · 4 mercati
Generazioni
Anno modello
MPV I · 1988–1999MPV II · 1999–2006
RichiamoCriticoMotoreEU

Dans certains interrupteurs d’allumage, trop de graisse a été appliquée à certains points de contact

Dans certains interrupteurs d’allumage, trop de graisse a été appliquée à certains points de contact. pour un véhicule utilisé dans ces conditions, cela peut entraîner une carbonisation de la graisse si et donc un risque accru d’incendie.

Safety Gate · UE · RappelConso · Francia15 dic 2022a12/00507/22Anni modello 1989–2002Mostrato in francese originale · traduzione in attesaVedi dettagli →
MPV I · 1988–1999MPV II · 1999–2006
MPV I · 1988–1999MPV II · 1999–2006
RichiamoCriticoMotoreUK

Fire may occur

Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.

DVSA · Regno Unito30 set 2016R/2016/210Anni modello 1989–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV I · 1988–1999
MPV II · 1999–2006
RichiamoCriticoMotoreJP

エンジン本体

エンジンの搬送工程における作業が不適切なため、作業中にオイルフィラーキャップを緩めてしまったものがある。そのため、そのままの状態で使用を続けると、高負荷運転時に当該キャップ部からオイルが飛散し、最悪の場合、火災に至るおそれがある。

jp24 apr 20061116590Anni modello 2006Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoCriticoMotoreNA

Fuel System

Certain vehicles have fuel injectors that do not match the lower intake manifold. This condition could potentially result in a fuel leak. In the presence of an ignition source, an engine compartment fire could occur. Correction: Dealers will replace the lower intake manifold with the correct one.

Transport Canada27 lug 19991999138Anni modello 2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoCriticoMotoreNA

Engine and engine cooling:Engine:Gasoline

Vehicle description: Minivans equipped with engines supplied by ford motor company cleveland engine plant. These engines are installed with fuel injectors that do not match the lower intake manifold

NHTSA · Stati Uniti7 lug 199999V171000Anni modello 2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoModeratoMotoreNA

Engine

Certain vehicles previously updated following an emission recall concerning the PCV hose may experience throttle icing during cold weather operation. As a result of misrouting of the PCV hose during the emission recall, moisture build-up inside the hose could freeze while the vehicle is parked. If the vehicle is then driven at constant highway speeds in extremely cold temperatures (-30 degrees Celsius or colder), the moisture in the blow-by gases may freeze in the throttle valve area. Under these conditions, even if the accelerator pedal is released while driving, engine speed may not decrease. Unwanted acceleration could result in a vehicle crash without prior warning. Correction: Dealers will inspect the previously replaced PCV hose for proper routing and reroute if necessary.

Transport Canada10 feb 20062006035Anni modello 2002–2003Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoModeratoMotoreNA

Engine

On certain vehicles equipped with a 2.5L V6 Duratec engine, while driving at a constant speed on the highway, it is possible that the engine speed will not decrease when releasing the accelerator pedal due to a frozen throttle valve. This condition occurs at ambient temperatures from -30 to -40 degrees Celsius. The vehicle can be brought to a full stop by depressing the brake pedal. Correction: Dealers will replace the intake manifold and PCV hose with modified parts which will change the layout of the PCV hose system.

Transport Canada20 ott 20042004376Anni modello 2000–2001Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
MPV II · 1999–2006
RichiamoModeratoMotoreJP

ブローバイ装置

ブローバイガスを吸気管に導くPCVホースの形状が不適切なため、エンジンの負圧変動 により当該ホースが伸縮する。そのため、そのまま使用を続けると、ブローバイガスまた はオゾンの影響で発生する微細な亀裂が進行し、当該ホースが破損するおそれがある。

jp26 ago 20041112110Anni modello 2002–2003Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoModeratoMotoreJP

エンジン一般

オートクルーズ・コントロール装置装着車において、オートクルーズ・コントロール・ケ ーブルの取り付け部に曲げ応力に対する耐久性が不十分なものがあり、そのままの状態で 使用を続けると、当該取り付け部(ケーブルブラケットに固定する部分)に亀裂が生じて 破損することがある。そのため、オートクルーズ・コントロール・ケーブルがケーブルブ ラケットに保持されなくなり、最悪の場合、オートクルーズ・コントロール・ケーブルが アクセルケーブルに引っ掛かり、オートクルーズ・コントロール・ケーブルのインナーワ イヤーが引かれた状態となり、エンジン回転が下がらなくなるおそれがある。

jp10 giu 20041110890Anni modello 1999–2002Mostrato in giapponese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoModeratoMotoreNA

Vehicle speed control:Cables

On certain minivans equipped with cruise control, the cruise control actuator cable may be broken due to insufficient strength (group 1). Also included are certain 2000-2001 minivans equipped with cruise control built between march 31, 1999 and march 31, 2001, that have had the cruise control repaired and possibly had a defective cable installed during that repair (group 2).

NHTSA · Stati Uniti19 mag 200404V234000Anni modello 2001–2002Mostrato in inglese originale · traduzione in attesaVedi dettagli →
MPV II · 1999–2006
RichiamoModeratoMotoreNA

Emissions

Certain vehicles do not comply with the requirements of CMVSS 1101- Emission Device. Inappropriate programming of the Powertrain Control Module.(PCM). Correction: Dealer will reprogram the PCM.

Transport Canada17 feb 20002000029Anni modello 2000Mostrato in inglese originale · traduzione in attesaVedi dettagli →

Fonti: NHTSA (Stati Uniti, pubblico dominio), Transport Canada (Open Government Licence – Canada), DVSA (Regno Unito, Open Government Licence v3.0), RappelConso e Safety Gate UE (Francia, Licence Ouverte 2.0).